Wstęp
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Full Size Metal Platform Bed Frame with Wooden Headboard. Please read all instructions carefully before assembly and use to ensure safe and proper installation.
Ważne informacje dotyczące bezpieczeństwa
Caution: This bed frame has a maximum weight capacity of 800 pounds. Exceeding this capacity could result in injury or damage. Handle with care during assembly and use to avoid potential pinch points or sharp edges. Proper assembly is important to prevent instability or collapse. Please refer to the assembly instructions for proper use and maintenance.
Always ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten fasteners as needed.
Zawartość opakowania
Przed rozpoczęciem montażu prosimy o sprawdzenie, czy wszystkie wymienione poniżej części są kompletne i nieuszkodzone. W przypadku braku lub uszkodzenia jakiejkolwiek części prosimy o kontakt z działem obsługi klienta.
- Headboard Panels (Wooden)
- Metal Side Rails
- Metal Support Legs
- Metal Center Support Bar
- Listwy metalowe
- Hardware Pack (Screws, Bolts, Allen Wrench, Plastic Locks)
Image: Key components of the bed frame, including the retro headboard, sturdy metal frame, bottom storage space, and scratch-resistance foot pads.
Instrukcja montażu
Follow these steps to assemble your bed frame. It is recommended to have two people for assembly.
Oficjalny film instruktażowy
Video: Detailed installation guide for the Yaheetech Industrial Platform Bed Frame, demonstrating each step of the assembly process.
- Step 1: Assemble the Headboard Frame.
Connect the headboard vertical supports to the horizontal crossbar using the provided bolts and Allen wrench. Ensure all connections are secure.
Image: Initial assembly of the headboard's metal frame.
- Step 2: Attach Wooden Headboard Panels.
Secure the wooden headboard panels to the assembled headboard frame using the designated screws. Make sure the panels are evenly spaced and firmly attached.
Image: Close-up of the wooden headboard panels, highlighting their rustic design.
- Step 3: Assemble the Footboard Frame.
Similar to the headboard, connect the footboard vertical supports to the horizontal crossbar using the provided hardware.
- Step 4: Connect Side Rails to Headboard and Footboard.
Attach the metal side rails to the headboard and footboard frames. Ensure all bolts are tightened to create a stable rectangular structure.
- Step 5: Install Center Support Bar and Legs.
Assemble the center support bar and attach its legs. Then, connect the entire center support structure to the main bed frame. This provides crucial stability.
Image: Illustration of the reinforced support system with multiple legs for enhanced stability.
- Step 6: Insert Metal Slats.
Place the metal slats into the designated slots on the side rails. Secure each slat using the plastic locks to prevent movement and noise.
Obraz: Szczegółowy view of how to insert a slat and apply the plastic lock for fastening.
Image: Close-up of the anti-sliding mechanism integrated into the bed frame to keep the mattress in place.
- Krok 7: Ostateczne dokręcanie.
Once all components are in place, re-check and fully tighten all bolts and screws to ensure maximum stability and safety.
Działanie i użytkowanie
- Umieszczenie materaca: This platform bed frame is designed to be used without a box spring. Simply place your full-size mattress directly onto the metal slats.
- Przechowywanie pod łóżkiem: The frame provides 12 inches of clearance, offering ample space for under-bed storage containers, luggage, or other items.
- Redukcja hałasu: The integrated rubber locks on the slats and EVA foam padding on the center rail are designed to minimize noise and prevent mattress sliding.
Image: Demonstrating the generous under-bed storage space provided by the frame.
Konserwacja
- Czyszczenie: Wipe the metal frame and wooden headboard with a dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Kontrola elementów złącznych: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain the frame's stability.
Rozwiązywanie problemów
- Piszczące dźwięki: If the bed frame produces squeaking noises, check all connections and ensure bolts are securely tightened. The EVA foam padding on the center rail is designed to reduce noise, but loose connections can still cause sound.
- Przesuwanie materaca: The frame includes rubber locks to prevent mattress sliding. If your mattress still slides, ensure these locks are properly installed and consider using a non-slip mattress pad.
- Niestabilność: If the frame feels unstable, re-verify that all components are correctly assembled and all fasteners are fully tightened. Ensure the bed is on a flat, even surface.
Specyfikacje
| Marka | Yaheetech |
| Numer modelu | YT-00099110 |
| Rozmiar | Pełny |
| Wymiary produktu | 77.36" dł. x 39.37" szer. x 56.69" wys. |
| Kompatybilny rozmiar materaca | Full (75" x 54") |
| Nośność | 800 funta |
| Tworzywo | Powder-coated Metal, P2 MDF boards with veneer |
| Kolor | Brown (Headboard), Black (Frame) |
| Prześwit pod łóżkiem | 12 cali |
| Wymagany montaż | Tak |
| Waga produktu | 64.8 funta |
Image: Detailed dimensions of the Yaheetech Full Size Metal Platform Bed Frame.
Gwarancja i obsługa klienta
For warranty information, missing parts, or any questions regarding your Yaheetech product, please refer to the warranty card included in your package or contact Yaheetech customer support directly.
Informacje kontaktowe można zazwyczaj znaleźć na oficjalnej stronie producenta webna stronie internetowej lub w miejscu zakupu.
Aby uzyskać dodatkową pomoc, odwiedź stronę Sklep Yaheetech na Amazon.
