1. Koniec produktuview
The Beghelli Emergency LED Lamp (Model BEG19500) is a high-quality emergency lighting solution designed to illuminate areas during power outages. This versatile lamp can be installed on walls, ceilings, or recessed, making it suitable for various environments. It features an 11W LED light source and is equipped with a long-lasting LiFe 3.2V 0.5 Ah battery, backed by a 5-year warranty.
Its robust design ensures functionality even in industrial settings, with an IP42 protection rating and IK05 impact resistance.
Rycina 1: Przód view of the Beghelli Emergency LED Lamp. Lamp features a white base and a transparent polycarbonate cover, revealing the LED light source inside.
2. Informacje dotyczące bezpieczeństwa
Always read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the product.
- Przed przystąpieniem do prac instalacyjnych lub konserwacyjnych należy upewnić się, że zasilanie jest odłączone.
- This product operates on 230V. Consult a qualified electrician if unsure about wiring.
- Nie wystawiaj lamp to extreme temperatures or direct water spray beyond its IP42 rating.
- Do not attempt to open or modify the battery compartment or internal components, except as explicitly instructed.
- Dispose of batteries and electronic components according to local regulations. More information can be found on the manufacturer's website or local waste management authorities.
3. Instalacja i konfiguracja
The Beghelli Emergency LED Lamp offers flexible installation options:
- Przygotowanie:
- Upewnij się, że główne zasilanie w miejscu instalacji jest wyłączone za pomocą wyłącznika automatycznego.
- Rozpakuj lamp and verify all components are present: the lamp unit and included battery.
- Opcje montażu:
Lamp can be mounted on a wall, ceiling, or recessed. The unit has 3 pre-breakage inputs (ø16) and can be installed on a standard 503 recessed box.
- Montaż ścienny/sufitowy: Mark the desired mounting points using the lamp's base as a template. Drill holes and secure the lamp za pomocą odpowiednich śrub (nie są dołączone).
- Montaż wpuszczany: Prepare the recess opening according to the lamp's dimensions (L 280 x H 119 x P 46 mm). Ensure sufficient space for wiring.
- Okablowanie:
- Connect the 230V power supply wires to the lamp's terminals. Ensure correct polarity.
- Lamp is designed for simple connection. If replacing an older unit, existing wiring may be compatible.
- Montaż baterii:
The LiFe 3.2V 0.5 Ah battery is included and typically pre-installed or easily connected. Ensure it is securely connected before closing the lamp okładka.
- Montaż końcowy:
Secure the transparent polycarbonate screen onto the lamp unit. Ensure it clicks into place for proper IP42 protection.
Figure 2: Photometric curve illustrating the light distribution pattern of the Beghelli Emergency LED Lamp. This diagram shows the intensity of light emitted at various angles.
4. Instrukcja obsługi
The Beghelli Emergency LED Lamp operates automatically in emergency mode (SA/SE).
- Normalna praca: When main power (230V) is present, the lamp's battery charges. The LED light remains off.
- Działanie awaryjne: W przypadku awarii zasilaniatage (blackout), the lamp automatically switches on, drawing power from its internal battery to provide emergency illumination.
- Czas pracy baterii: Lamp provides 120 lumens for 1 hour or 80 lumens for 2 hours in emergency mode, depending on the configured setting. Refer to the installation instructions for details on adjusting this setting (if applicable, often involves cutting a wire or jumper as per customer reviewS).
- Testowanie: Periodically test the emergency function by temporarily cutting the main power supply to the lamp's circuit. The lamp should illuminate immediately. Restore power after testing.
5. Konserwacja
Regular maintenance ensures optimal performance and longevity of your emergency lamp.
- Czyszczenie: Clean the transparent polycarbonate screen periodically with a soft, damp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
- Sprawdzenie baterii: The LiFe battery has a 5-year warranty. While designed for long life, it is recommended to perform a full discharge test annually to assess battery health. Allow the lamp to operate until the battery is depleted, then restore power to allow it to fully recharge.
- Kontrola wizualna: Corocznie sprawdzaj lamp for any signs of physical damage, loose connections, or discoloration.
- Wymiana: Jeśli lamp fails to illuminate during a power outage or if the battery duration significantly decreases, the battery may need replacement. Contact a qualified technician for battery replacement.
6. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Lamp nie świeci się podczas wyłączania zasilaniatage. |
|
|
| Lamp illuminates dimly or for a short duration. |
|
|
| Lamp pozostaje włączony stale. |
|
|
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | Beghelli |
| Numer modelu | POCZ 19500 |
| Zasilacz | 230 V |
| Cotage | 11 W |
| Strumień świetlny | 120 lumens (1 hour) / 80 lumens (2 hours) |
| Typ baterii | LiFe 3.2V 0.5 Ah (Lithium Metal) |
| Bateria w zestawie | Tak |
| Typ instalacji | Wall mount, Ceiling mount, Recessed |
| Wymiary (dł. x wys. x szer.) | 280 × 119 × 46 mm (11.02 × 4.69 × 1.81 cala) |
| Waga | 400 gramów (0.88 funta) |
| Kolor | Biały |
| Tworzywo | Polycarbonate (Screen: Transparent Polycarbonate) |
| Stopień ochrony | IP42 |
| Odporność na uderzenia | IK05 |
| Tryb pracy | SA/SE (Emergency) |
8. Gwarancja i wsparcie
The Beghelli Emergency LED Lamp (Model BEG19500) comes with a 5-letnia gwarancja on its LiFe 3.2V 0.5 Ah battery, ensuring long-term reliability.
For technical support, service, or warranty claims, please contact Beghelli customer service through their official weblub autoryzowanych dystrybutorów. Zachowaj paragon jako dowód zakupu.
For information on recycling and disposal of the product, especially the battery and LED components, please refer to local regulations and guidelines for electronic waste. More information can be found on the manufacturer's website or local waste management authorities.
