Instrukcja obsługi prowadnic szuflad VEVOR 18 cali z blokadą i wzmocnioną konstrukcją

Wstęp

This manual provides detailed instructions for the installation, operation, and maintenance of your VEVOR 18-inch heavy-duty locking drawer slides. These slides are designed for applications requiring high load capacity and full extension, suitable for industrial, commercial, and home use.

Instrukcje bezpieczeństwa

• Ensure all mounting surfaces are stable and capable of supporting the maximum load capacity.
• Use appropriate fasteners for your specific application.
• Podczas montażu należy nosić okulary ochronne.
• Avoid placing fingers between moving parts of the slides.
• Do not exceed the specified load capacity of 500 lbs per pair.
• Trzymaj dzieci z dala od miejsca instalacji.

Zawartość opakowania

• 1 Pair of VEVOR 18-inch Drawer Slides
• 1 x Screw Kit (for general installation)
• 1 x Instrukcja obsługi (ten dokument)

Cechy produktu

• Materiał Premium: Constructed from thick cold-rolled steel (CRS) plates, electroplated for anti-rust and wear-resistant properties.
• Large Load Capacity: Supports up to 500 lbs (227 kg) per pair.
• 3-Fold Full Extension: Allows the entire drawer to be pulled out, maximizing access to drawer space.
• Płynna i cicha praca: Features double steel ball-bearings and a nylon buffer design for silent and friction-free movement.
• Mechanizm blokujący: Equipped with a yellow unlock/detach button to lock the drawer in both fully closed and fully extended positions, preventing accidental movement.
• Montaż boczny: Designed for side mounting on cabinets or machine parts with a standard installation distance of 19.5 mm.

Specyfikacje

Instrukcje instalacji

The VEVOR drawer slides are designed for side-mount installation. Ensure the cabinet or mounting surface is structurally sound.

1. Separate the Slide Components: Fully extend the drawer slide and locate the yellow release lever. Press the lever to separate the inner slide rail (which attaches to the drawer) from the outer and middle rails (which attach to the cabinet).
2. Mount Outer/Middle Rails to Cabinet: Position the outer and middle slide rails on the side of the cabinet or mounting structure. Use a level to ensure they are perfectly horizontal. Mark the screw hole positions. Secure the rails using appropriate screws from the provided kit or suitable alternatives for your material. Ensure the installation distance (gap between the cabinet and drawer) is approximately 19.5 mm.
3. Mount Inner Rails to Drawer: Attach the inner slide rails to the sides of your drawer. Align them carefully to ensure smooth operation. Secure with screws.
4. Reassemble the Drawer: Align the inner slide rail on the drawer with the middle slide rail on the cabinet. Gently push the drawer into the cabinet until the slides engage and click into place. Test the drawer's movement.

Instrukcja obsługi

Pełne rozszerzenie

These slides offer 3-fold full extension, allowing the drawer to extend completely out of the cabinet for full access to its contents. Simply pull the drawer outwards until it reaches its maximum extension.

Mechanizm blokujący

The slides feature a locking mechanism to secure the drawer in both the fully closed and fully extended positions.

• Zablokować: When the drawer is fully closed or fully extended, the slides will automatically engage the lock.
• To Unlock and Move: To open a closed drawer or close an extended drawer, locate the yellow release lever (often visible at the front or rear of the slide when extended). Press or lift this lever to disengage the lock, then smoothly pull or push the drawer.

Konserwacja

• Czyszczenie: Periodically wipe the slide rails with a clean, dry cloth to remove dust and debris. For stubborn dirt, use a mild detergent solution and dry thoroughly.
• Smarowanie: Apply a small amount of silicone-based lubricant to the ball bearings and moving parts every 6-12 months, or as needed, to ensure continued smooth operation. Avoid petroleum-based lubricants as they can attract dirt.
• Kontrola: Regularly check all screws and fasteners to ensure they are tight. Inspect the slides for any signs of wear, damage, or deformation. Replace damaged slides immediately.

Rozwiązywanie problemów

• Drawer is Stiff or Hard to Open/Close:
  • Check for obstructions in the slide path.
  • Ensure the slides are clean and lubricated.
  • Verify that the slides are installed parallel and level. Misalignment can cause stiffness.
  • Confirm the load does not exceed the 500 lbs capacity.
• Drawer Does Not Lock:
  • Ensure the drawer is fully closed or fully extended for the locking mechanism to engage.
  • Inspect the yellow release lever for any damage or obstruction.
• Drawer Sags or Wobbles:
  • Check all mounting screws for tightness on both the drawer and cabinet sides.
  • Ensure the mounting surfaces are robust enough to support the weight.
  • Verify the load is evenly distributed and within the specified capacity.

Gwarancja i wsparcie

Produkty VEVOR zostały zaprojektowane z myślą o trwałości i wydajności. Aby uzyskać informacje o gwarancji, pomocy technicznej lub częściach zamiennych, prosimy o kontakt z działem obsługi klienta VEVOR za pośrednictwem oficjalnej strony internetowej. website or your purchase platform. Please have your model number (Drawer Slides 18inch) and purchase details ready.