Sealey NS009 19mm Combination Spanner Non-Sparking User Manual

1. Wprowadzenie

This manual provides essential information for the safe and effective use of the Sealey NS009 19mm Combination Spanner. This tool is designed for professional and industrial applications where non-sparking properties are critical.

The Sealey NS009 is manufactured from Beryllium Copper, ensuring its non-sparking characteristics. It features a die-forged construction for durability and an open end combined with a 12-point WallDrive® ring for versatile and secure fastening.

2. Informacje dotyczące bezpieczeństwa

Always observe the following safety precautions when using the Sealey NS009 combination spanner:

• Środki ochrony osobistej: Always wear appropriate personal protective equipment (PPE), such as safety glasses, to protect against potential hazards.
• Stan narzędzia: Inspect the spanner before each use for any signs of damage, wear, or deformation. Do not use a damaged tool.
• Prawidłowy rozmiar: Always use the correct size spanner for the fastener to prevent slippage, damage to the fastener, or injury.
• Non-Sparking Use: This tool is specifically designed to be non-sparking. Use it in environments where flammable or explosive atmospheres may be present. However, always verify the safety requirements of your specific work environment.
• Prawidłowy chwyt: Ensure a firm and secure grip on the spanner to prevent it from slipping during operation.
• Unikaj nadmiernego dokręcania: Do not use extension bars or "cheater pipes" to increase leverage, as this can damage the tool or the fastener and lead to injury.
• Czystość: Utrzymuj narzędzie w czystości, bez śladów smaru i oleju, aby zapewnić pewny chwyt.

3. Funkcje produktu

• Tworzywo: Manufactured from Beryllium Copper, providing non-sparking and corrosion-resistant properties.
• Budowa: Die-forged for enhanced strength and durability.
• Projekt: Features an open end for quick engagement and a 12-point WallDrive® ring end for secure grip and increased torque.
• WallDrive® System: Designed to grip the flats of the fixing, not the corners, reducing the risk of rounding off fasteners and allowing up to 30% more torque. This system is effective even on fasteners with damaged or rounded-off corners.

Rysunek 1: Illustration of the WallDrive® system, highlighting its ability to grip the flats of a fastener for improved torque and reduced rounding.

4. Konfiguracja

The Sealey NS009 combination spanner is ready for use directly out of its packaging. No assembly or complex setup is required.

1. Rozpakowywanie: Carefully remove the spanner from its packaging.
2. Inspekcja wstępna: Before first use, visually inspect the spanner for any manufacturing defects or shipping damage. Ensure the 19mm size marking is clear.
3. Czystość: Wipe down the tool with a clean, dry cloth to remove any protective coatings or dust.

Rysunek 2: The Sealey NS009 19mm Combination Spanner, ready for use.

5. Instrukcja obsługi

Using the Sealey NS009 spanner effectively involves selecting the correct end for the task and applying appropriate force.

1. Określ rozmiar zapięcia: Confirm the fastener you are working with is 19mm. Using an incorrect size can damage both the fastener and the tool.
2. Choose the Right End:
   • Otwarty koniec: Ideal for quick engagement on fasteners in open spaces or when access is limited from the top. Slide the open end onto the fastener.
   • Ring End (WallDrive®): Provides a more secure grip and higher torque application, especially useful for stubborn or slightly rounded fasteners. Place the ring end fully over the fastener.
3. Pozycjonowanie: Ensure the spanner is fully seated on the fastener to prevent slippage.
4. Applying Force: Apply steady, even pressure. Pull the spanner towards you rather than pushing, as this allows for better control and reduces the risk of injury if the spanner slips.
5. Kierunek: Turn the spanner in the desired direction (clockwise for tightening, counter-clockwise for loosening).

6. Konserwacja

Proper maintenance extends the life of your Sealey NS009 spanner and ensures its continued performance.

• Czyszczenie: After each use, wipe the spanner clean with a dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild solvent or degreaser can be used, followed by thorough drying.
• Składowanie: Store the spanner in a dry environment to prevent corrosion. A tool roll, toolbox, or wall-mounted rack is recommended. Avoid storing in damp conditions or directly on concrete floors.
• Kontrola: Periodically inspect the spanner for any signs of wear, cracks, or damage. Pay close attention to the jaws of the open end and the points of the ring end.
• Smarowanie: While not typically required for spanners, a light coat of rust-inhibiting oil can be applied if storing for extended periods in humid conditions.

7. Rozwiązywanie Problemów

Most issues with a combination spanner are related to improper use or tool condition.

8. Specyfikacje

• Model: NS009
• Rozmiar: 19mm
• Tworzywo: Miedź berylowa
• Styl głowy: Open End and 12pt WallDrive® Ring
• Skończyć: Powder Coated (Note: Product image shows a golden/bronze color typical of Beryllium Copper, while specifications list 'Red'.)
• Waga przedmiotu: Około 226 gramów (8 uncji)
• Wymiary produktu: Około 8.86 x 0.98 x 1.77 cala
• Non-Sparking: Tak
• Die Forged: Tak

9. Gwarancja

Sealey products are manufactured to high standards and are subject to rigorous quality control. This product comes with a Lifetime Guarantee, subject to terms and conditions.

Rysunek 3: Sealey Lifetime Guarantee information. Please refer to the official Sealey webstronie dla pełnych warunków.

For detailed warranty information and to register your product, please visit the official Sealey webodwiedź witrynę lub skontaktuj się z działem obsługi klienta.

10. Wsparcie

For further assistance, technical support, or inquiries regarding the Sealey NS009 19mm Combination Spanner, please contact Sealey customer service or visit their official webstrona:

• Urzędnik Webstrona: www.sealey.pl (lub odpowiednich regionalnych webteren)
• Obsługa klienta: Więcej informacji znajdziesz w sekcji kontaktowej na oficjalnej stronie webstrona z numerami telefonów i adresem e-mail pomocy technicznej.