Blackburn Dayblazer Front and Rear Bike Light Set Instruction Manual

1. Wprowadzenie

This manual provides essential information for the proper installation, operation, and maintenance of your Blackburn Dayblazer Front and Rear Bike Light Set. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

2. Zawartość opakowania

• Przednia lampka Blackburn Dayblazer 550
• Blackburn Grid Rear 40 Lumens Light
• Handlebar Mount Strap (for Front Light)
• Seatpost Mount Strap (for Rear Light)
• Kabel ładujący USB-C
• Instrukcja obsługi (ten dokument)

Figure 2.1: Contents of the Blackburn Dayblazer Front and Rear Bike Light Set.

3. Konfiguracja

3.1 Montaż przedniego światła

1. Secure the handlebar mount strap to your bicycle's handlebar. Ensure the mount is positioned centrally and securely tightened to prevent movement during rides.
2. Slide the Dayblazer 550 Front Light onto the mount until it clicks into place. Verify that the light is firmly attached and facing forward.

Figure 3.1: Front light attached to a bicycle handlebar.

3.2 Montaż tylnego światła

1. Attach the seatpost mount strap to your bicycle's seatpost. Position it vertically or horizontally as preferred, ensuring it is visible from the rear.
2. Insert the Grid Rear 40 Lumens Light into the mount. Ensure it is securely fastened and facing directly backward.

Rysunek 3.2: Example of a rubber strap used for mounting the bike lights.

4. Działanie

4.1 Włączanie/wyłączanie

• To turn on: Press and hold the power button on each light for approximately 1-2 seconds.
• To turn off: Press and hold the power button on each light for approximately 1-2 seconds.

4.2 Wybór trybu

• While the light is on, short press the power button to cycle through the available lighting modes.
• The Dayblazer 550 Front Light offers 3 modes (e.g., High, Low, Flash).
• The Grid Rear 40 Lumens Light offers 5 modes (e.g., Solid, Flash patterns).

4.3 Wskaźnik baterii

The power button on each light features small color LEDs to indicate the current battery level:

• Zielony: Pozostało 100-50% baterii
• Pomarańczowy: Pozostało 50-25% baterii
• Czerwony: 25-0% battery remaining (time to charge)

5. Ładowanie

Both the front and rear lights are rechargeable via USB-C.

1. Locate the USB-C charging port on each light (typically covered by a rubber flap for water resistance).
2. Connect the provided USB-C cable to the light and to a standard USB power source (e.g., computer, wall adapter).
3. The battery indicator LED will show charging status (e.g., blinking while charging, solid when fully charged).
4. Once fully charged, disconnect the cable and ensure the rubber flap is securely closed to maintain water resistance.

Figure 5.1: USB-C charging cable included with the light set.

6. Konserwacja

• Czyszczenie: Przetrzyj światła miękką szmatką.amp płótno. Unikaj stosowania ściernych środków czyszczących i rozpuszczalników.
• Składowanie: Store the lights in a cool, dry place when not in use. For prolonged storage, ensure they are partially charged.
• Wodoodporność: The lights are designed to be water resistant (Front: IP67, Rear: IP65). Ensure all ports are securely sealed before exposure to moisture.

Figure 6.1: Front light demonstrating IP67 water resistance.

Figure 6.2: Rear light demonstrating IP65 water resistance.

7. Rozwiązywanie Problemów

8. Specyfikacje

9. Gwarancja i wsparcie

9.1 Informacje o gwarancji

Ten produkt jest objęty a 2-letnia gwarancja for battery or electrically powered products, product components, and accessories for such products. Please retain your proof of purchase for warranty claims.

9.2 Skontaktuj się z pomocą techniczną

For technical assistance, warranty claims, or any questions regarding your Blackburn Dayblazer Bike Light Set, please visit the official Blackburn weblub skontaktuj się bezpośrednio z działem obsługi klienta. Zapoznaj się z opakowaniem produktu lub oficjalnymi informacjami. webna tej stronie znajdziesz najbardziej aktualne dane kontaktowe.