Instruction Manual for Okin JLDQ-10 Recliner Motor Actuator

Produkt ponadview

The Okin JLDQ-10 Part Model JLDQ.10.435.250D Motor Actuator is a replacement component designed for power recliners, electric sofas, and massage chairs. This low-voltage DC motor (24V) provides the necessary push and pull force for the smooth operation of your furniture's reclining mechanism. It features compact dimensions for easy installation and is built for reliable performance.

Figure 1: Okin JLDQ-10 Recliner Motor Actuator. This image shows the complete motor actuator unit with its main body, extending rod, and electrical connectors.

Specyfikacje

Figure 2: Dimensional specifications of the JLDQ-10 motor actuator. This diagram illustrates the minimum installation size (435mm) and the stroke length (250mm), crucial for compatibility.

Figure 3: Close-up of the product label on the JLDQ-10 motor actuator. This label displays important information including the model number JLDQ.10.435.250D, voltage (24V), power (50W), duty cycle, and serial number.

Konfiguracja i instalacja

Before installing the new motor actuator, ensure that the motor SKU (JLDQ.10.435.250D) on the label and the shapes of the cable connectors and motor ends match your existing unit. This is critical for proper fit and function.

1. Bezpieczeństwo przede wszystkim: Disconnect power to the recliner or furniture before beginning any installation work.
2. Usuń stary siłownik: Carefully detach the old motor actuator from its mounting points and disconnect all electrical connections. Note the orientation and connection points for reference.
3. Sprawdź zgodność: Compare the physical dimensions and connector types of the new actuator with the old one. Pay close attention to the minimum installation dimension and stroke length as shown in Figure 2.
4. Zainstaluj nowy siłownik: Mount the new JLDQ-10 motor actuator into the designated position. Ensure all mounting screws or pins are securely fastened.
5. Podłącz okablowanie: Reconnect the electrical cables to the appropriate ports. The motor is a DC motor, and connections should be straightforward. Ensure all connections are firm and secure.
6. Funkcjonalność testu: Once installed, carefully reconnect power and perform a test run of the recliner's functions to ensure smooth operation.

Figure 4: Close-up of the mounting bracket on the JLDQ-10 motor actuator. This shows the secure attachment points for installation into the recliner mechanism.

Instrukcja obsługi

The Okin JLDQ-10 motor actuator operates in conjunction with your recliner's control switch or remote. Once properly installed and connected to a 24V DC power supply, the motor will extend or retract the recliner mechanism based on the input from the control unit.

• Odchylanie/rozkładanie: Press and hold the appropriate button on your recliner's switch or remote to extend the footrest and/or recline the backrest.
• Return/Retract: Press and hold the opposite button to retract the footrest and return the backrest to its upright position.
• Cykl pracy: Adhere to the specified operation frequency of "On 1 min / Off 8 min" to prevent overheating and prolong the motor's lifespan. Avoid continuous operation for extended periods.

Konserwacja

Regular maintenance helps ensure the longevity and smooth operation of your JLDQ-10 motor actuator.

• Zachowaj czystosc: Periodically clean the motor and surrounding areas to prevent dust and debris buildup, which can hinder performance.
• Sprawdź połączenia: Routinely inspect all electrical connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or failure.
• Smarowanie: The actuator is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by Okin support.
• Unikaj przeciążenia: Do not exceed the specified push and pull force (1000N) to prevent damage to the motor.

Rozwiązywanie problemów

If your recliner is not operating correctly after installing the JLDQ-10 motor actuator, consider the following troubleshooting steps:

• Brak ruchu:
  • Zasilanie: Ensure the recliner is properly plugged into a working power outlet and that the power supply unit (transformer) is functioning correctly.
  • Połączenia elektryczne: Double-check all cable connections between the motor, power supply, and control switch/remote. Ensure they are fully seated and not damaged.
  • Control Switch/Remote: Before replacing the motor, it is highly recommended to troubleshoot your recliner's control switch or remote. You can test this by temporarily connecting a known working switch from another recliner, if available. A faulty switch is a common cause of non-operation.
• Częściowy ruch lub jąkanie:
  • Przeszkody: Check for any physical obstructions preventing the recliner mechanism from moving freely.
  • Przeciążać: Ensure the recliner is not being overloaded beyond its weight capacity, which can strain the motor.
  • Cykl pracy: Allow the motor to cool down if it has been operated continuously. Adhere to the "On 1 min / Off 8 min" duty cycle.
• Hałas silnika:
  • Unusual noises might indicate a mechanical issue or a need for professional inspection.

Rysunek 5: View of the motor's end, highlighting the importance of troubleshooting the control switch first. This image reinforces the recommendation to verify the switch's functionality before concluding the motor is faulty.

Gwarancja i wsparcie

For warranty information or technical support regarding your Okin JLDQ-10 Part Model JLDQ.10.435.250D Motor Actuator, please contact Okin customer service. Ensure you have your product model number and any purchase details available when contacting support.

You can typically find contact information on the official Okin webna stronie internetowej lub za pośrednictwem sprzedawcy, u którego produkt został zakupiony.