1. Wprowadzenie
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Richmat Electric Bed Motor. This dual-motor system is designed to provide reliable and powerful adjustment for electric beds, featuring a maximum thrust of 6500N per motor. It includes both wired and wireless remote controls for flexible use.
Figure 1: Richmat Electric Bed Motor with included wireless and wired remote controls.
2. Konfiguracja i instalacja
Before installation, ensure all components are present and undamaged. The motor is designed for easy integration into compatible electric bed frames.
2.1 Wymiary i kompatybilność
The motor features a robust design with a maximum thrust of 6500N per motor. The center distance between the two mounting rods on the motor is 581 mm. The overall dimensions are 707 mm (length) x 167 mm (width) x 121 mm (height).
Figure 2: Detailed dimensions of the Richmat Electric Bed Motor (measurements in mm).
2.2. Kroki instalacji
- Przygotowanie: Ensure the bed frame is stable and accessible. Disconnect power from any existing motor system.
- Montowanie: Align the motor's mounting points with the corresponding points on your bed frame. Secure the motor using appropriate fasteners (not included, typically provided with the bed frame). The mounting hole diameter is 25mm.
- Podłączenie elektryczne: Connect the motor's power cable to a suitable power outlet. Ensure the connection is secure.
- Połączenie zdalnego sterowania: Plug in the wired remote control if you intend to use it. The wireless remote control operates via 2.4G frequency and does not require a direct cable connection to the motor.
- Test wstępny: Once installed, carefully test the motor's functions using the remote controls to ensure smooth operation of the head and foot sections.
3. Instrukcja obsługi
The Richmat Electric Bed Motor offers dual control options: a 2.4G wireless handheld controller and a wired handheld controller. You can choose the controller that best suits your preference and environment.
3.1. Bezprzewodowy pilot zdalnego sterowania
The wireless remote provides convenient control without physical tethering. It features buttons for adjusting the head and foot sections of the bed.
Figure 3: Wireless Remote Control (Front and Side ViewS).
- Głowa w górę/w dół: Use the designated buttons to raise or lower the head section of the bed.
- Podnoszenie/opuszczanie stopy: Za pomocą przeznaczonych do tego przycisków podnieś lub opuść podnóżek łóżka.
- Simultaneous Movement: Some buttons may allow for synchronized movement of both head and foot sections.
3.2. Pilot przewodowy
The wired remote control offers a reliable connection and similar functionality to the wireless version.
Figure 4: Wired Remote Control.
- Głowa w górę/w dół: Press and hold the corresponding buttons to adjust the head section.
- Podnoszenie/opuszczanie stopy: Press and hold the corresponding buttons to adjust the foot section.
4. Konserwacja
Proper maintenance ensures the longevity and optimal performance of your electric bed motor.
- Czyszczenie: Regularly clean the motor and remote controls with a dry, soft cloth. Avoid using abrasive cleaners or solvents.
- Ochrona przed wilgocią: Protect the unit from moisture and liquids. Do not expose it to water or high humidity.
- Kontrola kabla: Okresowo sprawdzaj wszystkie kable pod kątem oznak zużycia, przetarcia lub uszkodzeń. Uszkodzone kable należy natychmiast wymienić.
- Smarowanie: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by a qualified technician.
5. Rozwiązywanie Problemów
If you encounter issues with your Richmat Electric Bed Motor, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Silnik nie reaguje na sterowanie zdalne. | No power; Remote control battery low (wireless); Remote control not paired (wireless); Loose cable connection (wired). | Check power outlet and motor connection. Replace remote batteries. Re-pair wireless remote (refer to specific pairing instructions if available). Ensure wired remote cable is securely plugged in. |
| Silnik wydaje nietypowe dźwięki. | Obstruction; Loose mounting; Internal issue. | Check for any obstructions around the motor or moving parts. Ensure the motor is securely mounted. If noise persists, contact support. |
| Bed movement is jerky or inconsistent. | Overload; Obstruction; Power fluctuation. | Ensure the bed is not overloaded beyond its weight capacity. Check for obstructions. Ensure stable power supply. |
Jeśli po wypróbowaniu tych rozwiązań problem nadal występuje, skontaktuj się z obsługą klienta, aby uzyskać dalszą pomoc.
6. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | HJA1 |
| Producent | Richmat |
| Wymiary (dł. x szer. x wys.) | Wymiary 70.7 x 16.7 x 12.1 cm |
| Waga | 5.12 kilograma |
| Maksymalny ciąg | 2 x 6500N |
| Średnica otworu montażowego | 25 mm |
| Center Distance Between Mounting Rods | 581 mm |
| Typ sterowania | 2.4G Wireless Handheld Controller + Wired Handheld Controller |
| Wymagany montaż | Tak |
| UPC | 753510673065 |
7. Gwarancja i wsparcie
This Richmat Electric Bed Motor is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or manufacturer directly. When contacting support, please have your model number (HJA1) and purchase information readily available.
