1. Koniec produktuview
The Okin 6 Button Control Handset is designed for use with power recliners and lift chairs, specifically those equipped with two motors. This handset provides intuitive control over the chair's movements, allowing for adjustment of various positions. It features a durable design with a 5-pin round plug for direct connection to the motor.
Główne cechy:
- OEM 4 or 6-button hand control handset manufactured by Okin.
- Features a 90-degree 5-pin connection for direct plug-in to the motor.
- Equipped with dedicated up and down buttons for controlling two separate motors.
- Broad compatibility with various brands including Okin, Catnapper, Tranquil Ease, Limoss, Golden, Mega Motion, Pride, Med, KD, and Bride Lift Chairs and Power Recliners.
- Total cord length is approximately 6.6 feet, providing ampdosięgnę.
Figure 1: The Okin 6 Button Control Handset, showing the ergonomic design, control buttons, coiled cord, and the 90-degree 5-pin connector.
2. Ważne informacje dotyczące bezpieczeństwa
Please read and understand all safety instructions before installing or operating the control handset. Failure to follow these instructions may result in injury or damage to the product or furniture.
- Always ensure the chair is fully assembled and stable before use.
- Do not exceed the maximum weight capacity of the chair as specified by the chair manufacturer.
- Exercise caution when operating the chair's motors to prevent pinching or injury. Keep hands and feet clear of moving parts.
- Keep the handset away from liquids and extreme temperatures.
- Do not attempt to disassemble or repair the handset yourself. Contact qualified service personnel for repairs.
3. Konfiguracja i instalacja
This handset is designed for simple plug-and-play installation. Ensure your power recliner or lift chair is compatible with a 5-pin round plug connection.
- Odłącz zasilanie: Before beginning installation, unplug your recliner or lift chair from the wall outlet to prevent accidental operation.
- Znajdź port połączenia: Identify the existing handset's connection port, typically located near the motor or power supply unit under the chair. If replacing an old handset, carefully disconnect it.
- Podłącz nowy telefon: Align the 5-pin round plug of the Okin handset with the corresponding port on your chair's motor. The 90-degree angle of the plug is designed for easy insertion. Gently push until the connection is secure. Do not force the plug.
- Bezpieczne okablowanie: Route the handset's cord in a way that it will not be pinched or tangled by the chair's moving parts. Use cable ties if necessary to keep it tidy and secure.
- Przywróć zasilanie: Once the handset is securely connected and the cabling is managed, plug your recliner or lift chair back into the wall outlet.
Rysunek 2: Zbliżenie view of the 5-pin connector, illustrating the connection type for the Okin handset.
4. Instrukcja obsługi
The Okin 6 Button Control Handset provides straightforward operation for your power recliner or lift chair.
- Funkcje przycisków: The handset features multiple buttons, typically arranged in pairs. Each pair controls a specific motor or function of the chair. For a two-motor chair, one pair of buttons will control the backrest movement (recline/incline), and another pair will control the leg rest movement (raise/lower).
- Obsługa krzesła:
- Naciśnij i przytrzymaj "W górę" button for the desired section (e.g., backrest or leg rest) to move it upwards or outwards.
- Naciśnij i przytrzymaj "W dół" button for the desired section to move it downwards or inwards.
- Release the button to stop movement at any desired position.
- Zgodność: This handset is designed to be fully compatible with a wide range of power recliners and lift chairs that utilize a 5-pin connection and two motors. If your chair has different motor configurations or connection types, this handset may not be suitable.
5. Konserwacja i pielęgnacja
Proper care will extend the life of your Okin 6 Button Control Handset.
- Czyszczenie: Wipe the handset with a soft, dry cloth. For stubborn dirt, a slightly damp Można użyć ściereczki, ale należy uważać, aby wilgoć nie dostała się do urządzenia. Nie należy używać środków czyszczących o działaniu ściernym ani rozpuszczalników.
- Składowanie: When not in use, store the handset in a safe place where it will not be stepped on, dropped, or exposed to excessive heat or cold.
- Pielęgnacja sznurka: Avoid kinking, twisting, or placing heavy objects on the cord. Regularly inspect the cord and plug for any signs of damage. If damage is found, discontinue use and replace the handset.
6. Rozwiązywanie Problemów
If you experience issues with your Okin 6 Button Control Handset, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Handset is unresponsive or chair does not move. |
|
|
| Only one motor responds. |
|
|
| Handset has an unusual odor. |
|
|
7. Specyfikacje produktu
| Specyfikacja | Szczegół |
|---|---|
| Marka | Okin |
| Nazwa modelu | Okin 6 Button Control Handset |
| Kolor | Czarny |
| Wymiary produktu (dł. x szer. x wys.) | 9"D x 3.1"W x 2.8"H (approximate handset dimensions) |
| Typ połączenia | Wtyczka okrągła 5-pinowa, kątowa 90 stopni |
| Długość przewodu | Około 6.6 stóp (2 metra) |
| Typ sterowania | Wired switch, controls two actuators/motors |
| Zgodność | Okin, Catnapper, Tranquil Ease, Limoss, Golden, Mega Motion, Pride, Med, KD, Bride Lift Chairs and Power Recliners with 5-pin connection and two motors. |
| Waga przedmiotu | 8.8 uncji |
| Producent | Okin |
| Kraj pochodzenia | Chiny |
| UPC | 753510673317 |
8. Gwarancja i wsparcie
For information regarding warranty coverage, please refer to the documentation provided with your purchase or contact the seller directly. Okin products are generally known for their reliability.
If you require further assistance, technical support, or need to inquire about replacement parts, please contact the retailer from whom you purchased the handset or visit the official Okin brand store for more information:
