Wstęp
Welcome to the Hamilton Khaki Field Mechanical Watch. This timepiece is designed for durability and precision, featuring a Swiss mechanical hand-winding movement. This manual provides essential information for the proper setup, operation, and maintenance of your watch to ensure its longevity and accurate performance.
Produkt ponadview
Przód view of the Hamilton Khaki Field Mechanical Watch, showcasing the black dial with white numerals and beige canvas strap.
Tył view of the watch, displaying the stainless steel case back with Hamilton branding and water resistance markings.
The Hamilton Khaki Field Mechanical Watch worn on a wrist, illustrating its size and fit.
Organizować coś
1. Nawijanie początkowe
Before wearing your watch for the first time, or if it has stopped, it needs to be manually wound.
- Upewnij się, że koronka jest w pozycji 1 (całkowicie dociśnięta do koperty).
- Turn the crown clockwise repeatedly. You will feel a slight resistance as the mainspring tightens.
- Continue winding until you feel a firm stop. Do not force the crown past this point to avoid damage. Approximately 30-40 full turns are usually sufficient for a full power reserve.
2. Ustawianie czasu
Aby ustawić prawidłowy czas:
- Wyciągnij koronkę do pozycji 2 (najdalej na zewnątrz). Wskazówka sekundowa zatrzyma się, umożliwiając precyzyjne ustawienie czasu.
- Obróć koronkę zgodnie z ruchem wskazówek zegara lub przeciwnie do ruchu wskazówek zegara, aby przesunąć wskazówki na żądany czas.
- Once the time is set, push the crown back into position 1 (fully in) to restart the movement.
Obsługa zegarka
Daily Winding
For optimal accuracy and consistent operation, it is recommended to wind your Hamilton Khaki Field Mechanical Watch daily, preferably at the same time each day. This ensures the mainspring maintains sufficient tension.
Regulacja czasu
If minor time adjustments are needed, follow the "Setting the Time" instructions. Always ensure the crown is fully pushed in after adjustment to maintain water resistance.
Konserwacja
Czyszczenie
- Sprawa: Wipe the watch case with a soft, dry cloth. For stubborn dirt, a slightly damp Można użyć ściereczki, a następnie natychmiast wysuszyć. Unikać agresywnych środków chemicznych i materiałów ściernych.
- Pasek: The beige canvas strap can be gently cleaned with a mild soap and water solution. Allow it to air dry completely before wearing. Avoid excessive soaking.
Odporność na wodę
Your Hamilton Khaki Field Mechanical Watch has a water resistance rating of 5 bar (50 meters). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as showering or light swimming.
Ważny:
- Nie należy używać koronki, gdy zegarek jest mokry lub zanurzony.
- Water resistance is not a permanent condition and may decrease over time due to wear and tear on gaskets. It is recommended to have the water resistance checked periodically by an authorized service center.
- Avoid exposing the watch to extreme temperature changes, which can affect the gaskets.
Profesjonalna obsługa
Mechanical watches require periodic servicing to maintain optimal performance and accuracy. It is recommended to have your watch serviced by an authorized Hamilton service center every 3-5 years.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Watch has stopped or is running slowly. | Niewystarczające uzwojenie. | Manually wind the watch fully (approx. 30-40 turns). Ensure daily winding. |
| Czas jest niedokładny. | Insufficient winding, exposure to strong magnetic fields, or need for service. | Ensure the watch is fully wound. Keep the watch away from strong magnetic sources (e.g., speakers, certain electronics). If the problem persists, contact an authorized service center. |
| Kondensacja pod kryształem. | Loss of water resistance or exposure to extreme temperature changes. | Immediately take the watch to an authorized service center. Do not attempt to dry it yourself, as moisture can damage the movement. |
Specyfikacje
- Numer modelu: H69439933
- Ruch: Swiss Mechanical Hand-Winding
- Materiał obudowy: Stal nierdzewna
- Średnica koperty: 38mm
- Grubość obudowy: 9.5mm
- Materiał paska: Beige Canvas
- Przepustowość łącza: 20mm
- Kryształ: Szafir
- Wodoodporność: 5 bary (50 metrów / 165 stóp)
- Kolor tarczy: Czarny
- Producent: Zegarek Hamiltona
Gwarancja i wsparcie
Informacje o gwarancji
Your Hamilton Khaki Field Mechanical Watch is covered by a 2-letnia gwarancja międzynarodowa from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Obsługa klienta
For warranty service, repairs, or any questions regarding your watch, please contact an authorized Hamilton service center or visit the official Hamilton website for a list of service locations.
