BNT Dummy Fake Security Camera Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the setup, operation, and maintenance of your BNT Dummy Fake Security Camera. This device is designed to provide a visual deterrent against potential intruders by simulating the appearance and function of a real security camera. It is suitable for both indoor and outdoor use in various environments.

Image: Four BNT Dummy Fake Security Cameras, illustrating the product's appearance.

2. Funkcje produktu

• Realistyczny projekt: Mimics the appearance of a functional security camera to deter unauthorized access.
• Nighttime LED: Equipped with a built-in photoelectric sensor, the red LED light illuminates automatically at night, enhancing realism.
• Łatwa instalacja: No wiring required. Mounts quickly and easily to ceilings, walls, or other surfaces using included screws.
• Regulowany kąt: Features 2-axis rotation (360 degrees horizontally, 90 degrees vertically) for flexible positioning.
• Trwała konstrukcja: Made from Acrylonitrile Butadiene Styrene (ABS) plastic, suitable for indoor and outdoor environments.
• Zasilany bateryjnie: Requires 2 AA batteries (not included) for LED function.

Image: A diagram highlighting the dummy lamp beads, dummy lens, IR-cut, red LED bubble, and showing 360-degree horizontal and 90-degree vertical rotation capabilities.

3. Zawartość opakowania

• BNT Dummy Fake Security Camera(s)
• Śruby montażowe i kołki ścienne
• Warning Stickers (may vary by package)
• Instrukcja obsługi

Image: An illustration of the package contents, showing four dummy cameras, several warning stickers, and bags containing screws and wall plugs.

4. Konfiguracja i instalacja

1. Wybierz lokalizację: Choose a prominent location where a real camera would typically be installed, such as near an entrance, garage, or high-traffic area. Ensure the location is visible to maximize its deterrent effect.
2. Zainstaluj baterie: Slide open the back cover of the camera unit. Insert 2 AA batteries (not included) into the battery compartment, ensuring correct polarity. Close the cover securely.
3. Zamontuj kamerę: Using the provided screws and wall plugs, securely attach the camera's mounting base to your chosen surface (ceiling, wall, etc.).
4. Dostosuj kąt: Loosen the adjustment knob on the camera's mount. Position the camera to the desired angle, then tighten the knob to secure it. The camera supports 360-degree horizontal and 90-degree vertical adjustment.
5. Apply Warning Stickers: Place the included warning stickers in visible locations to further enhance the illusion of active surveillance.

Image: A visual guide showing how to slide the back cover, insert 2x1.5V AA batteries, and how the built-in light sensor activates the red LED at night.

5. Instrukcja obsługi

The BNT Dummy Fake Security Camera operates automatically. During daylight hours, the camera appears as a standard surveillance device. At night, its built-in photoelectric sensor detects low light conditions and automatically activates the flashing red LED light, simulating active recording and enhancing its deterrent effect.

Image: A BNT Dummy Camera mounted on a wall at night, with its red LED light clearly illuminated, demonstrating the photoelectric sensor's function.

Obraz: Zbliżenie view of the BNT Dummy Camera at night, showing the red LED light active, indicating its operation in low-light conditions.

6. Konserwacja

• Wymiana baterii: When the red LED light dims or stops flashing, replace the 2 AA batteries. Ensure to use high-quality AA batteries to prevent leakage and damage to the battery case.
• Ochrona środowiska: When replacing batteries, take care to avoid exposing the internal components to rain or moisture to prolong the life of the battery case.
• Sprzedaż: Dispose of used batteries properly according to local regulations to protect the environment.
• Czyszczenie: Okresowo przecieraj zewnętrzną część aparatu miękką, miękką szmatką.amp Ściereczką usuń kurz i zanieczyszczenia. Unikaj stosowania silnych środków chemicznych i ściernych środków czyszczących.

7. Rozwiązywanie Problemów

• Światło LED nie działa:
  • Upewnij się, że baterie są prawidłowo zainstalowane, z zachowaniem właściwej polaryzacji.
  • Wymień stare lub wyczerpane baterie na nowe.
  • Test the photoelectric sensor: Cover the LED light with your hand in a dark environment. If the red LED light turns on, the product is functioning correctly.
• Camera Appears Unrealistic:
  • Verify the camera is positioned in a location where a real camera would typically be found.
  • Ensure the red LED is functioning at night to enhance realism.

8. Specyfikacje

9. Gwarancja i wsparcie

BNT provides a reliable 24-month after-sales service for this product. If you encounter any questions or issues regarding your BNT Dummy Fake Security Camera, please contact our dedicated customer service team for assistance. For further information or support, you may visit the official BNT Store: BNT Store on Amazon.