Moen 84763SRN

Moen M84763SRN Genta 1.2 GPM Widespread Bathroom Faucet Instruction Manual

Model: M84763SRN

1. Koniec produktuview

The Moen M84763SRN Genta Widespread Bathroom Faucet is a two-handle widespread bathroom sink faucet designed for modern bathrooms. It features a 1.2 GPM maximum flow rate and includes a pop-up drain assembly. The faucet is equipped with Duralock Technology for easy installation and a Spot Resist Brushed Nickel finish to resist fingerprints and water spots.

Moen Genta Widespread Bathroom Faucet in Spot Resist Brushed Nickel

Image: Moen Genta 1.2 GPM Widespread Bathroom Faucet in Spot Resist Brushed Nickel. This image displays the faucet installed on a countertop, showcasing its curved edges and sleek design.

2. Informacje dotyczące bezpieczeństwa

3. Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne.

Notatka: Valve cartridges are typically sold separately for widespread faucets to allow for customization. Please ensure you have the correct valve cartridges for your installation.

4. Wymagane narzędzia

Do instalacji zalecane są następujące narzędzia:

5. Instalacja

This faucet is designed for a 3-hole widespread installation with a minimum of 6 inches and a maximum of 16 inches between the center of the outer holes. Ensure your sink configuration matches these requirements.

Instrukcja wideo instalacji

For a detailed visual guide on installing a similar 2-handle widespread lavatory faucet, please refer to the video below. While this video features a Delta faucet, the general installation steps for a widespread faucet with traditional valves are applicable.

Video: How To Install Delta 2-Handle Widespread Lav Faucet. This video provides step-by-step instructions for installing a widespread bathroom faucet, covering valve installation, handle placement, spout mounting, and drain assembly.

Instalacja krok po krokuview:

  1. Przygotuj obszar instalacji: Turn off the water supply. Clear the area under the sink.
  2. Install End Valves: Attach the supply lines to the end valves. Ensure the hot and cold sides are correctly identified (hot on the left, cold on the right). Apply silicone sealant if your countertop is irregular.
  3. Mount End Valves: Insert the end valves into the outer holes of the countertop. Secure them from underneath using the provided mounting hardware. Hand-tighten first, then snug with a Phillips head screwdriver, being careful not to overtighten.
  4. Montaż uchwytów: Place the handles over the end valves. Ensure they rotate freely and are aligned correctly in the full off position. Tighten the set screws on the handles using the appropriate hex wrench.
  5. Montaż wylewki: Apply a plastic gasket to the base of the spout. Insert the spout into the center hole of the countertop. Secure it from underneath with the mounting bracket and nut, ensuring the spout tube and lift rod have clearance.
  6. Connect Spout Tubes and Supply Lines: Use the provided spout connector adapter to connect the spout tube to the hot and cold supply lines. Ensure all connections are secure and leak-proof.
  7. Montaż zespołu odpływowego: Disassemble the drain assembly, apply silicone sealant to the flange, and insert it into the sink drain hole. Reassemble and tighten the drain body from underneath, ensuring the pivot hole faces the rear.
  8. Install Pivot Rod and Stopper: Insert the pivot rod into the drain assembly's pivot hole, securing it with the plastic gasket and nut. Connect the lift rod to the pivot rod using the included strap, ensuring smooth operation of the stopper.
  9. Flush Supply Lines: Before reinstalling the aerator, turn on the hot and cold water supplies one at a time and let water run through the system for about 30 seconds to clear any debris.
  10. Reinstall Aerator: Gently screw the aerator back into the spout. Use the aerator wrench to snug it into place, but do not overtighten.

6. Instrukcja obsługi

The Moen Genta faucet features two handles for precise control over water flow and temperature.

7. Konserwacja

To maintain the Spot Resist Brushed Nickel finish and ensure the longevity of your Moen Genta faucet, follow these cleaning guidelines:

8. Rozwiązywanie Problemów

If you encounter any issues with your faucet, refer to the following common troubleshooting tips:

9. Specyfikacje

FunkcjaSpecyfikacja
MarkaMoen
Nazwa modeluGenta
Numer modeluM84763SRN
OpisTwo Handle Widespread Bathroom Sink Faucet
Rodzaj wykończeniaOdporny na plamy szczotkowany nikiel
TworzywoPlastic (components)
Liczba uchwytów2
Liczba otworów3
Typ instalacjiRozpowszechniony
Maksymalna szybkość przepływu1.2 galona na minutę (GPM)
Zasięg wylewki4.6 cali
Waga przedmiotu4.7 funtów
Wymiary produktu8" gł. x 5" szer. x 5" wys.
UPC026508284940

10. Gwarancja i wsparcie

The Moen M84763SRN Genta Faucet comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your product or visit the official Moen website. You can also contact Moen customer service directly for assistance.

Powiązane dokumenty - 84763SRN

Przedview Specyfikacja baterii umywalkowej dwuuchwytowej Moen Caldwell o szerokim zastosowaniu
Szczegółowe specyfikacje dwuuchwytowej baterii umywalkowej Moen Caldwell, obejmujące takie funkcje, jak montaż Duralock™, certyfikat WaterSense®, zgodność z ADA, natężenia przepływu oraz informacje gwarancyjne dla modeli z serii WS84440 i CA84440.
Przedview Instrukcja montażu baterii umywalkowej dwuuchwytowej Moen
Szczegółowa instrukcja montażu i lista części do dwuuchwytowej baterii umywalkowej Moen Wide-Handle (model INS12069). Zawiera wskazówki krok po kroku, zalecenia dotyczące narzędzi oraz informacje o gwarancji.
Przedview Moen Genta Two-Handle Widespread Lavatory Faucet Illustrated Parts
Illustrated parts list and ordering information for the Moen Genta Two-Handle Widespread Lavatory Faucet, model series 84763. Find kit numbers and available finishes for all faucet components.
Przedview Instrukcja montażu baterii umywalkowej dwuuchwytowej Moen INS12070
Instrukcja instalacji krok po kroku dwuuchwytowej baterii umywalkowej Moen INS12070, zawierająca schematy, listę części i pomocne wskazówki dotyczące prawidłowej instalacji. Odwiedź stronę moen.com, aby uzyskać pomoc.
Przedview Instrukcja montażu baterii umywalkowej dwuuchwytowej Moen
Kompleksowa instrukcja montażu i lista części do dwuuchwytowej baterii umywalkowej Moen Wide-Handle (model INS12069). Zawiera wskazówki krok po kroku, przydatne narzędzia i informacje o gwarancji.
Przedview Bateria i uchwyt na ręcznik Moen Genta: Specyfikacja i instrukcja montażu
Pełne specyfikacje, funkcje i instrukcje instalacji baterii umywalkowej jednouchwytowej Moen Genta™ (model serii WS84760) i pierścienia na ręczniki Moen Genta™ (model BH3886).