American DJ Mega Flash DMX & Rockville RockPAR50 User Manual

1. Wprowadzenie

This manual provides detailed instructions for the safe and effective operation of your American DJ Mega Flash DMX 800w Compact DMX Strobe Light and Rockville RockPAR50 LED RGB Compact Par Can DJ/Club DMX Wash Light. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. This package combines a powerful strobe effect with a versatile LED wash light, designed for various lighting applications in clubs, stagi wydarzenia.

2. Informacje dotyczące bezpieczeństwa

Always observe the following safety precautions to prevent injury or damage to the units:

• Bezpieczeństwo elektryczne: Ensure the power supply matches the unit's requirements (110-240V/50-60Hz). Always disconnect power before servicing or cleaning.
• Heat Warning (Mega Flash DMX): The strobe lamp generates significant heat. The surface temperature can reach up to 90°C. Allow at least 15 minutes for the unit to cool down before handling or attempting lamp wymiana.
• Materiały łatwopalne: Maintain a minimum safety distance of 0.5 meters (1.6 feet) from flammable materials.
• Wentylacja: Ensure adequate ventilation around both units. Do not block ventilation openings.
• Ochrona oczu: Avoid direct eye exposure to the light source, especially the strobe light, as it can cause discomfort or temporary vision impairment.
• Montowanie: Securely mount the units using appropriate brackets and hardware. Ensure the mounting surface can support the weight of the fixtures.
• Tylko do użytku wewnątrz pomieszczeń: These units are designed for indoor use (IP grade 20). Do not expose them to rain or moisture.

Rysunek 2.1: Strona view of the Mega Flash DMX strobe light with safety warnings.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• (1) American DJ Mega Flash DMX 800-Watt Compact DMX Strobe Light with Sound Sensor
• (1) Rockville RockPAR50 LED RGB Compact Par Can DJ/Club DMX Wash Light with Dual Bracket

Rysunek 3.1: Koniecview of the American DJ Mega Flash DMX and Rockville RockPAR50 units.

4. Konfiguracja

4.1 Konfiguracja fizyczna

Both units come with versatile mounting options. The Mega Flash DMX includes a hanging bracket, and the RockPAR50 features a double-bracket that functions as both a floor stand and a hanging bracket.

• Montowanie: Securely attach the units to a truss, ceiling, or wall using appropriate clamps and safety cables. Ensure the mounting location is stable and can support the weight. For floor use, position the RockPAR50 on a flat, stable surface.
• Podłączenie zasilania: Connect the included power cables to the power input on each unit and then to a suitable power outlet. The RockPAR50 also features power input and output for daisy-chaining multiple units.

Figure 4.1: Rear panel of the Mega Flash DMX strobe light.

Rysunek 4.2: Tył view of the Rockville RockPAR50 LED Par Light.

4.2 Połączenie DMX

Both units support DMX-512 protocol for advanced control via a DMX controller.

• Connect a DMX cable from the DMX OUT of your controller to the DMX IN of the first fixture.
• For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on.
• Ensure the DMX address is set correctly on each fixture according to your DMX controller's setup.

5. Instrukcja obsługi

5.1 American DJ Mega Flash DMX Strobe Light

The Mega Flash DMX offers both DMX control and manual operation.

• Sterowanie DMX: The unit uses 2 DMX channels for speed and dimming. Refer to the DMX chart in your DMX controller's manual for specific channel assignments.
• Sterowanie ręczne: Use the speed and dimmer control knobs located on the rear of the unit for direct adjustment of flash rate and intensity (0-100% dimming).
• Tryb aktywacji dźwiękiem: The built-in microphone allows the strobe to flash in sync with music or ambient sound.

5.2 Rockville RockPAR50 LED RGB Par Light

The RockPAR50 provides various operation modes and color mixing capabilities.

Rycina 5.1: Przód view of the Rockville RockPAR50 LED Par Light.

• Tryby pracy: The RockPAR50 supports Auto, Voice-Activated, Master-Slave, and DMX512 modes. It also features dedicated modes for Strobe, Color Change, Color Fade, Dimmer, and ID Address.
• Mieszanie kolorów: Achieve 16.7 million different color variations by mixing the red, green, and blue LEDs. This can be controlled via DMX or through static color settings.
• Efekt stroboskopowy: An adjustable speed strobe effect is available.
• Zautomatyzowane programy: Built-in automated programs can be run via master/slave configuration or DMX, with variable speed control.
• Panel sterowania: Use the digital display and buttons on the bottom of the unit to navigate menus and select modes.

Rysunek 5.2: Dół view of the Rockville RockPAR50 LED Par Light control panel.

6. Konserwacja

Regularna konserwacja zapewnia długowieczność i optymalną wydajność opraw oświetleniowych.

• Czyszczenie: Periodically clean the exterior of the units with a soft, dry cloth. For lenses and reflectors, use a soft cloth and a mild glass cleaner. Ensure units are unplugged and cool before cleaning.
• Lamp Replacement (Mega Flash DMX): The Mega Flash DMX uses a ZB-800, 800W lamp. To replace, ensure the unit is unplugged and has cooled for at least 15 minutes. Loosen the screws indicated for lamp replacement, carefully remove the covers, and replace the lamp. Refer to the safety section for warnings regarding hot surfaces.
• LED Life (RockPAR50): The RockPAR50 LEDs have a long lifespan of 20,000 – 100,000 hours, minimizing the need for frequent replacement.
• Czyszczenie wentylatora: Ensure cooling fans (if present) are free from dust and debris to maintain proper airflow.

7. Rozwiązywanie Problemów

Jeśli napotkasz problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:

• Brak zasilania:
  • Sprawdź podłączenie kabla zasilającego do urządzenia i gniazdka ściennego.
  • Sprawdź, czy gniazdko elektryczne jest aktywne.
  • Check the fuse on the unit (if applicable) and replace if blown.
• Brak strumienia świetlnego:
  • Ensure the dimmer/intensity is not set to 0%.
  • For Mega Flash DMX, check if the lamp is burnt out and replace if necessary.
  • For RockPAR50, ensure the correct mode is selected (e.g., not in DMX mode without a DMX signal).
• Problemy ze sterowaniem DMX:
  • Verify DMX cable connections and ensure they are secure.
  • Check DMX address settings on the fixture and controller.
  • Ensure DMX termination is used for long cable runs.
  • Test with a different DMX cable or controller.
• Sound Active Mode Not Responding (Mega Flash DMX):
  • Ensure the sound active mode is enabled.
  • Increase the volume of the audio source or move the unit closer to the sound.

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ADJ and Rockville websites. Keep your proof of purchase for any warranty claims.