Wstęp
This manual provides essential information for the proper setup, operation, and maintenance of your Serta Motion Select adjustable bed remote control. This genuine OEM remote is designed for the Serta Motion Select adjustable bed base. While the manufacturer replaced the original black remote with a new gray version as of 2018, all functionality and quality remain identical. Please ensure your old remote's buttons match this replacement exactly for compatibility. Easy syncing instructions are included to get you started quickly.
Image: Serta Motion Select Adjustable Bed Remote Control, showing its layout and buttons.
Konfiguracja i parowanie
To ensure your new Serta Motion Select remote control functions correctly with your adjustable bed base, follow these simple pairing instructions:
- Locate the Pairing Button: On your Serta adjustable bed base, locate the pairing button. This button is typically found on the control box attached to the bed frame, often near the power cord connection.
- Press the Pairing Button: Press and hold the pairing button on the bed base for approximately 3-5 seconds until a light on the control box begins to flash, indicating it is in pairing mode.
- Sparuj pilota: While the light on the control box is flashing, press and hold any button on your new Serta Motion Select remote control for approximately 3-5 seconds.
- Potwierdzenie: The light on the control box should stop flashing and remain solid, or the bed may respond with a slight movement, indicating successful pairing. Your remote is now ready for use.
If pairing is unsuccessful, repeat the steps. Ensure the remote has fresh batteries installed before attempting to pair.
Instrukcja obsługi
Your Serta Motion Select remote control provides intuitive control over your adjustable bed's features. Familiarize yourself with the buttons and their functions:
- Head Up/Down Arrows: Umożliwia regulację zagłówka łóżka w górę lub w dół.
- Foot Up/Down Arrows: Umożliwia regulację podnóżka łóżka w górę lub w dół.
- Przycisk FLAT: Returns both the head and foot sections of the bed to a completely flat position.
- ZERO G Button: Activates the 'Zero Gravity' preset position, which elevates the head and foot to a position that may relieve pressure on the back and improve circulation.
- ANTI SNORE Button: Activates a preset position designed to gently raise the head to help reduce snoring.
- MASSAGE Controls (+/-): Adjusts the intensity of the massage function.
- FULL BODY/STOP Buttons: Activates or deactivates the full body massage function.
- Przycisk ŚWIATŁA: Controls any integrated under-bed lighting or remote backlight.
- Ustawienia pamięci (1, 2): Allows you to save and recall your favorite bed positions. To save a position, adjust the bed to your desired setting, then press and hold the desired preset button (1 or 2) until the remote indicates the position is saved (e.g., by flashing a light). To recall, simply press the saved preset button.
Wymiana baterii
The Serta Motion Select remote control uses a CR2477 Lithium Cell 3V battery. To replace the battery, follow these steps:
- Turn the Remote Over: Place the remote control face down on a soft, clean surface to avoid scratching the buttons.
- Otwórz komorę baterii: Locate the battery compartment cover on the back of the remote. There is a small latch or indentation. Use your finger or a small, flat tool to gently pry open the cover.
- Wyjmij starą baterię: Once the cover is open, you will see the circular CR2477 battery. Gently push the battery out of its holder.
- Włóż nową baterię: Place the new CR2477 battery into the compartment with the positive (+) side facing upwards (the side with the numbers/text). Ensure it clicks securely into place.
- Zamknij komorę: Align the battery compartment cover and press it firmly until it snaps shut.
After replacing the battery, you may need to re-pair the remote control with your bed base using the 'Setup and Pairing' instructions above.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | Serta |
| Numer modelu | Serta Motion Select |
| Kompatybilne urządzenia | Regulowane łóżko |
| Maksymalna liczba obsługiwanych urządzeń | 1 |
| Kolor | Gray (replaces original black version) |
| Funkcja specjalna | Ergonomic |
| Wymagane baterie | 1 x CR2477 Lithium Cell 3V (included) |
Rozwiązywanie problemów
- Pilot nie odpowiada: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Attempt to re-pair the remote with the bed base using the 'Setup and Pairing' instructions.
- Bed Not Moving: Ensure the bed base is properly plugged into a working power outlet. Check all cable connections between the bed base and the control box.
- Częściowa funkcjonalność: If only certain buttons work, try replacing the battery and re-pairing. If the issue persists, contact Serta customer support.
Konserwacja
To ensure the longevity and optimal performance of your Serta Motion Select remote control:
- Keep the remote clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Protect the remote from extreme temperatures, moisture, and direct sunlight.
- Unikaj upuszczania pilota i narażania go na silne uderzenia.
- Replace batteries promptly when the remote's performance declines.
Gwarancja i wsparcie
For specific warranty information regarding your Serta Motion Select adjustable bed remote control, please refer to the documentation provided with your original bed base or contact Serta customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance or technical support, please visit the official Serta webstronie lub skontaktuj się z działem obsługi klienta.
