BNT Solar Dummy Fake Camera Security Outdoor

Wstęp

This manual provides detailed instructions for the installation, operation, and maintenance of your BNT Solar Dummy Fake Camera. This device is designed to simulate a real security camera, providing a visual deterrent against potential intruders without the complexity or cost of a functional surveillance system. It features a realistic appearance, a flashing LED light, and is powered by solar energy with battery backup.

Informacje dotyczące bezpieczeństwa

• This product is a dummy camera and does not record video or provide actual surveillance.
• Przechowywać w miejscu niedostępnym dla dzieci.
• Do not attempt to open or modify the device, as this may damage the product and void any implied warranty.
• Ensure proper installation to prevent the camera from falling, which could cause injury or damage.
• Baterie należy utylizować zgodnie z lokalnymi przepisami.

Zawartość opakowania

Sprawdź zawartość paczki, aby upewnić się, że znajdują się w niej wszystkie elementy:

• 1 x BNT Solar Dummy Fake Camera
• Śruby montażowe i kołki ścienne
• CCTV Sticker (optional, may vary by package)
• Instrukcja obsługi (ten dokument)

Produkt ponadview

The BNT Solar Dummy Fake Camera is designed to mimic the appearance of a functional security camera. Key components include:

• Dome Housing: Realistic camera dome with a simulated lens.
• Migająca czerwona dioda LED: Indicates simulated operation, enhancing realism.
• Panel słoneczny: Charges the internal rechargeable batteries during daylight hours.
• Regulowany uchwyt montażowy: Umożliwia elastyczne pozycjonowanie i regulację kąta.
• Anteny: Further enhance the realistic appearance of a wireless camera.

Obraz: Przód view of the BNT Solar Dummy Fake Camera, showing the dome, solar panel, and antennas.

Image: Diagram illustrating the dimensions of the dummy camera (approximately 9.06 inches height, 4.92 inches width) and a close-up of the simulated infrared LED lights within the dome.

Organizować coś

1. Instalacja baterii

The dummy camera requires 2 AA rechargeable batteries (not included) to power the flashing LED light. The solar panel will charge these batteries during daylight hours.

1. Gently unscrew the hemisphere (bottom part) of the camera to access the battery compartment.
2. Insert 2 AA rechargeable batteries into the battery compartment, ensuring correct polarity (+/-).
3. Carefully reattach and screw the hemisphere back onto the camera body.

Obraz: Wybuchowy view showing the bottom hemisphere of the camera unscrewed, revealing the compartment for two AA rechargeable batteries.

Image: Illustration of the solar panel and the internal battery compartment, indicating that solar energy charges the rechargeable batteries.

2. Zainstaluj anteny

Screw the two provided antennas into the designated ports on the top of the camera body. These are for aesthetic purposes to enhance realism.

3. Montaż kamery

The dummy camera can be mounted on walls, ceilings, or other flat surfaces using the included screws and wall plugs. Choose a location that receives ample sunlight for optimal solar charging and is visible for deterrence.

1. Wybierz odpowiednie miejsce montażu.
2. Use the mounting bracket as a template to mark the drill holes on the surface.
3. Drill pilot holes and insert wall plugs if mounting into drywall or masonry.
4. Przymocuj uchwyt montażowy do powierzchni za pomocą dołączonych śrub.
5. Attach the dummy camera to the mounted bracket.
6. Adjust the camera angle as desired. The camera offers 180-degree adjustability.

Image: Diagram showing the dummy camera's mounting bracket allowing for 180-degree angle adjustment.

Image: Four-step visual guide for installation: unscrew hemisphere, put in batteries, install antenna, and mount to wall.

Zalecane miejsce docelowe

The dummy camera is suitable for both indoor and outdoor use. For outdoor placement, ensure the solar panel receives direct sunlight for optimal charging. Consider locations such as:

• Garage entrances
• Drzwi przednie
• Podwórka
• Budynki biurowe
• Centra handlowe
• Magazyny

Obraz: Byłyamples of suitable installation locations including garage, office, backyard, front doors, shopping mall, and warehouse.

Image: Illustrates that the camera can be battery-powered for indoor use or solar + battery powered for outdoor use.

Operacyjny

The BNT Solar Dummy Fake Camera operates automatically once batteries are installed and it is exposed to light.

• Migająca dioda LED: The red LED light will begin to flash, simulating the activity of a real surveillance camera. This flashing light is designed to be a visual deterrent.
• Ładowanie słoneczne: During daylight hours, the integrated solar panel will absorb sunlight and convert it into energy to recharge the installed AA batteries. This ensures continuous operation of the LED light, especially during nighttime.
• Moc baterii: When there is insufficient sunlight, the camera will draw power directly from the installed AA batteries to keep the LED flashing.

Image: Close-up of the dummy camera highlighting the solar panel and its energy-saving function.

Konserwacja

• Czyszczenie: Periodically wipe the camera's surface and solar panel with a soft, damp cloth to remove dust and dirt. Ensure the solar panel is clean for efficient charging. Do not use abrasive cleaners.
• Wymiana baterii: If the flashing LED light becomes dim or stops flashing, it may be time to replace the rechargeable AA batteries. Follow the battery installation steps in the Setup section.
• Odporność na warunki atmosferyczne: The camera is designed with an IP54 international protection rating, indicating resistance to dust and splashing water. While it is suitable for outdoor use, avoid submerging it in water or exposing it to extreme weather conditions beyond its rating.

Image: The dummy camera being sprayed with water, illustrating its IP54 (mislabelled as IP65 in image) water resistance for outdoor use.

Rozwiązywanie problemów

• Dioda LED nie miga:
  • Ensure rechargeable AA batteries are installed correctly and are not depleted. Replace if necessary.
  • Check if the solar panel is clean and receiving direct sunlight for charging.
• Camera appears unstable after mounting:
  • Verify that all mounting screws are tightened securely.
  • Ensure the mounting surface is sturdy and can support the camera's weight.
• Product appears damaged:
  • If the product arrived damaged, contact the retailer or manufacturer for assistance.

Specyfikacje

Gwarancja i wsparcie

For warranty information or technical support, please refer to the documentation provided with your purchase or contact BNT customer service directly. Contact details can typically be found on the product packaging or the official BNT webstrona.

Odwiedź BNT Store on Amazon Aby uzyskać więcej informacji.