Wstęp
This manual provides comprehensive instructions for the installation, operation, and maintenance of your PRUVEEO Smart ACC Hardwire Kit, model HWK-08. This kit is designed to provide a continuous power supply to your dash camera, enabling features like parking monitoring and protecting your vehicle's battery from discharge.
Konfiguracja i instalacja
1. Zawartość zestawu
The PRUVEEO Smart ACC Hardwire Kit includes the following components:
- ACC Hardwire Kit Module
- Various Fuse Tap Cables (for different fuse types)
- Mini USB to Type-C Adapter
- Type-C to Mini USB Adapter
- Narzędzie do podważania
Obraz: Ponadview of the PRUVEEO Smart ACC Hardwire Kit components.
2. Połączenie przewodowe
Identify the three main wires from the hardwire kit module:
- Czarny przewód: Connects to the vehicle's ground point.
- Czerwony przewód: Connects to an ACC (Accessory) fuse in the vehicle's fuse box. This fuse is only powered when the ignition is on.
- Żółty przewód: Connects to a 12V normal power (constant power) fuse in the vehicle's fuse box. This fuse is always powered, even when the ignition is off.
Image: Detailed wiring diagram for the hardwire kit connection to a dash camera.
3. Fuse Box Connection
Locate your vehicle's fuse box. This is typically found under the dashboard, in the glove compartment, or in the engine bay. Use the provided fuse tap cables to connect the red and yellow wires to the appropriate fuses. Ensure you select a fuse that matches the function (ACC or constant power) and that the fuse tap is inserted correctly.
Image: Wiring diagram showing fuse box connection points for BAT+, ACC, and GND.
4. Niska objętośćtage Cut-off Adjustment
The hardwire kit features adjustable low voltage protection to prevent your vehicle's battery from draining. To adjust the cut-off voltage:
- Press and hold any button on the module for 3 seconds to turn on the LED display.
- Press the '+' or '-' buttons to adjust the desired cut-off voltage.
- The LED will flash 3 times to confirm your setting.
Domyślna objętośćtage values are 11.5V, 11.8V, and 12.0V for 12V systems. The adjustable range is 11V-13V. A common recommended setting is 11.8V.
Image: Illustration of the adjustable voltage feature on the hardwire kit modules and typical fuse box location.
Instrukcja obsługi
1. Automatyczne nagrywanie
Once installed, the hardwire kit will automatically power your dash cam. When the vehicle is started or opened, the dash cam will power on and begin recording. When the vehicle is turned off, the kit will continue to supply power for parking monitoring.
2. Całodobowy monitoring parkingu
The continuous power supply from the hardwire kit enables your dash cam's parking monitor function. If your dash cam supports it, it will automatically switch to time-lapse or continuous recording mode when the vehicle is parked, providing surveillance even when the engine is off.
Image: Visual representation of 24-hour parking monitoring capability.
3. Digital Voltage Wyświetlacz
The hardwire kit features a digital display that shows the current voltage and corresponding current. This allows you to monitor your vehicle's power usage in real-time.
Image: The hardwire module with its digital display and indicators for parking monitoring features.
Konserwacja
The PRUVEEO Smart ACC Hardwire Kit requires minimal maintenance. Periodically check all connections to ensure they remain secure. Inspect the wiring for any signs of wear or damage. Ensure the fuse taps are firmly seated in the fuse box. Keep the module clean and free from dust or debris.
Rozwiązywanie problemów
Dash Cam Does Not Power On
- Sprawdź połączenia: Ensure all wires (black, red, yellow) are securely connected to their respective points.
- Verify Fuses: Check the fuses in the fuse taps and the original fuses in your vehicle's fuse box. Replace any blown fuses.
- Połączenie USB: Ensure the USB cable from the hardwire kit is properly connected to your dash cam.
Vehicle Battery Drains
- Niska objętośćtage Cut-off Setting: Sprawdź, czy niski poziom głośnościtage cut-off setting is appropriate for your vehicle's battery. A setting of 11.8V is generally recommended for 12V systems.
- Fuse Tap Placement: Ensure the yellow wire is connected to a constant power fuse and the red wire to an ACC fuse. Incorrect placement can lead to continuous power draw when not intended.
Parking Monitor Not Working
- Ustawienia kamery samochodowej: Confirm that the parking monitor feature is enabled in your dash cam's settings.
- Stała moc: Ensure the yellow wire of the hardwire kit is connected to a constant power source in the fuse box.
Problemy ze zgodnością
Some vehicle fuse boxes may have specific configurations (e.g., multiple relays around fuses) that can make installation challenging or require different fuse tap types. If you encounter difficulties, professional installation may be necessary.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Model | HWK-08 |
| Wejście Voltage | Prąd stały 12V-30V |
| Objętość wyjściatage | Prąd stały 5 V |
| Prąd wyjściowy | 2 A/3 A |
| Niska objętośćtagOchrona elektroniczna (system 12 V) | Adjustable (11.8V, 12.0V, 12.2V recommended; range 11V-13V) |
| Niska objętośćtagOchrona elektroniczna (system 24 V) | Adjustable (e.g., 23.6V for 24V systems) |
| Wymiary opakowania | 3.5 x 2.3 x 1.4 cala |
| Waga przedmiotu | 0.634 uncji |
Informacje o gwarancji
For specific warranty details regarding your PRUVEEO Smart ACC Hardwire Kit HWK-08, please refer to the product packaging or visit the official PRUVEEO webWarunki gwarancji mogą się różnić.
Obsługa klienta
For technical assistance, troubleshooting, or any other customer service inquiries, please visit the official PRUVEEO website or contact their customer support team through the channels provided on their webstrona.
