StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

1. Wprowadzenie

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Co znajduje się w pudełku

• Konsola KVM
• 6 ft [1.8 m] KVM cable
• Nakrętki klatkowe M5
• Śruby M5

3. Konfiguracja i instalacja

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Montaż w stojaku

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

1. Slide the KVM console into the desired 1U rack space.
2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Kable połączeniowe

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
3. Connect the power cable to the KVM console and a power outlet.

Rysunek 2: Tył view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

4. Instrukcja obsługi

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

1. To open the console, pull the handle to slide the drawer out of the rack.
2. Lift the LCD panel to an upright position.
3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.

Figure 3: KVM Console in open position, ready for use.

4.2 Korzystanie z klawiatury i touchpada

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Nawigacja w menu OSD

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

5. Konserwacja

Aby zapewnić długowieczność i optymalną wydajność konsoli KVM, należy przestrzegać poniższych wskazówek dotyczących konserwacji:

• Czyszczenie: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
• Wentylacja: Ensure proper airflow around the console. Do not block ventilation openings.
• Zarządzanie kablami: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
• Warunki środowiskowe: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Rozwiązywanie Problemów

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

• Brak wyświetlacza: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
• Klawiatura/mysz nie odpowiada: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
• Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
• Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Specyfikacje

8. Gwarancja i wsparcie

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon zakupu na wypadek reklamacji.