1. Ważne informacje dotyczące bezpieczeństwa
Please read this entire manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. Failure to follow the instructions and safety warnings may result in serious personal injury, property damage, or product damage.
- Check for missing or defective parts: Before starting, verify all parts are included and undamaged. Do not use defective parts.
- Nośność: This monitor stand is designed for monitors up to 27 inches and 22 lbs (10 kg) each. Do not exceed the maximum weight capacity.
- Grubość biurka: For grommet mounting, ensure your desk thickness is suitable (up to 4 inches).
- Stabilność: Ensure the stand is placed on a stable, level surface. For free-standing options, distribute monitor weight evenly to prevent tipping.
- Dzieci: Keep children away from the product during assembly. Small parts may be choking hazards.
2. Zawartość opakowania
Verify all components are present and undamaged before proceeding with assembly.
Image showing the organized hardware kit, arms, two 40cm poles, free-standing base, grommet base, plate connection parts, VESA plates, and the manual.
Lista części:
- Podstawa wolnostojąca
- Two 40cm poles
- Monitor arms (for four monitors)
- VESA plates (4x)
- Grommet base (optional)
- Plate connection parts
- Organized hardware kit (screws, washers, Allen keys)
3. Wymiary produktu
Szczegółowe wymiary produktu przedstawiono na poniższym schemacie.
Diagram illustrating the overall dimensions of the monitor stand, including pole height (31.5 inches), total width (51.18 inches), base dimensions, and VESA mounting hole patterns (75x75mm and 100x100mm).
- Maksymalny rozmiar ekranu: Do 27 cali na monitor
- Nośność: Max 22 lbs (10 kg) per plate
- Zgodność z VESA: 75x75mm i 100x100mm
- Wysokość masztu: 31.5 cala (800 mm)
- Total Width (approx.): 51.18 cala (1300 mm)
4. Instrukcja instalacji
Follow these steps carefully to assemble your Suptek ML6864 Quad Monitor Stand.
4.1. Assemble the Base and Pole
- Attach the bottom pole section to the free-standing base using the provided screws and Allen key. Ensure it is securely tightened.
- Connect the two 40cm pole sections together. Secure them with the designated screw and Allen key.
- Insert the assembled pole into the base.
4.2. Attach Monitor Arms to the Pole
- Slide the lower monitor arm assembly onto the main pole. Position it at your desired height and secure it using the clamping mechanism and Allen key.
- Slide the upper monitor arm assembly onto the main pole. Position it at your desired height and secure it using the clamping mechanism and Allen key.
4.3. Mount Monitors to VESA Plates
- Attach the VESA plates to the back of each monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
- Carefully slide each monitor (with attached VESA plate) onto the corresponding monitor arm. Secure the monitors in place with the provided locking screws or mechanisms.
4.4. Optional Grommet Base Installation
If using the grommet base option, replace the free-standing base with the grommet base and secure it through your desk's grommet hole (fits desks up to 4 inches thick).
4.5. Film instalacyjny
Video demonstrating the assembly and accessory installation for Suptek MD/ML6 monitor mounts, including steps relevant to the ML6864 model.
5. Dostosowania
The Suptek ML6864 monitor stand offers various adjustment options for optimal viewkomfort.
Diagram illustrating the rotation, swivel, and tilt capabilities of the monitor arms and VESA plates.
- Regulacja wysokości: Loosen the Allen key screw on the main pole to slide the monitor arms up or down to your desired height. Re-tighten the screw to secure.
- Przechylenie: Each monitor can be tilted ±90° up and down. The middle plates tilt ±45° up and down. Adjust the tilt angle by loosening the tilt mechanism, setting the desired angle, and re-tightening.
- Obracać: The monitor arms can swivel ±90° left and right at 8 joints. The middle plates swivel ±45° left and right at 2 joints. Adjust by moving the monitor to the desired angle.
- Obrót: Monitors can be rotated 360° from landscape to portrait orientation.
Image demonstrating the adjustable height feature of the monitor stand and the removable VESA plates for easy monitor attachment.
6. Zarządzanie kablami
Keep your workspace tidy by utilizing the integrated cable management clips on the monitor arms and pole.
- Route your power and AV cables through the detachable cable clips along the monitor arms and down the central pole.
- Ensure cables have enough slack to accommodate monitor adjustments without tension.
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | suptek |
| Model | ML6864 |
| Waga przedmiotu | 14.02 funta |
| Typ montażu | Tabletop Mount, Free-Standing (Grommet option included) |
| Typ ruchu | Articulating, Rotate, Swivel, Tilt |
| Tworzywo | Stal stopowa |
| Kompatybilne urządzenia | Monitors up to 27 inches |
| Maksymalny kąt pochylenia | 15 Degrees (Note: Product description states ±90° for outer, ±45° for middle) |
8. Rozwiązywanie Problemów
- Monitors sagging or not holding position: Ensure all adjustment screws and bolts on the arms and VESA plates are securely tightened with the provided Allen keys. Over time, adjustments may loosen and require re-tightening.
- Stand instability (free-standing): Verify the base is on a flat, stable surface. Ensure monitors are distributed as evenly as possible to maintain balance. If using a desk clamp, ensure it is firmly attached to a sturdy desk.
- Difficulty with cable management: Ensure cables are not excessively long or short. Use all provided clips and route cables smoothly to avoid kinks or tension.
9. Gwarancja i wsparcie
For warranty information, technical support, or replacement parts, please contact Suptek customer service through your original purchase channel. Keep your purchase receipt for warranty claims.
