Wstęp
This manual provides detailed instructions for the installation, operation, and maintenance of the SkyTech 9800337 Smart Batt II/III Fireplace Remote Control System. This system is designed to offer safe, reliable, and user-friendly control for gas heating appliances.
The system operates using radio frequencies (RF) within a 20-foot range, utilizing non-directional signals. Each system is pre-programmed at the factory with one of 1,048,567 unique security codes. It is essential to match the remote receiver's code to that of the transmitter before initial use.
Produkt ponadview
Image: The SkyTech 9800337 Smart Batt II/III Fireplace Remote. The remote is black with an LCD display at the top and control buttons below. A small flip cover on the lower left side is open, revealing text instructions for manual and thermostatic operation.
The SkyTech 9800337 system includes both a battery-operated transmitter (remote) and a receiver. Key features include:
- All battery-operated receiver and transmitter for flexible placement.
- A protective flip cover for the 4-button controls, preventing accidental presses.
- LCD display showing room temperature in either Fahrenheit (°F) or Celsius (°C).
- Equipped with 1,048,576 security codes to prevent interference.
- Programmable thermostat setting for automated temperature control.
- Includes all necessary Skytech batteries and a wall holder for convenient storage.
- Features a 9-hour countdown timer and a 24-hour clock.
- Flame icon and low battery indicator on the LCD for easy monitoring.
Organizować coś
1. Instalacja baterii
The system requires 6 AA batteries, which are included. Install batteries into both the transmitter and the receiver according to the polarity markings. Ensure the battery compartment covers are securely closed.
2. Umiejscowienie odbiornika
Place the receiver near your gas heating appliance, ensuring it is within the 20-foot operating range of the transmitter. Avoid placing the receiver in direct contact with hot surfaces or in areas with excessive moisture.
3. Code Matching (Pairing)
Before first use, the remote receiver's code must be matched to the transmitter. Refer to the specific instructions provided with your product for the exact pairing procedure, which typically involves pressing a learn button on the receiver and then a button on the transmitter within a short timeframe.
Instrukcja obsługi
The SkyTech 9800337 remote offers both manual and thermostatic operation modes.
Obsługa ręczna
To operate the fireplace manually:
- Naciśnij TRYB button on the transmitter until "ON" or "OFF" is displayed for manual control.
- Use the appropriate buttons (e.g., ON/OFF, UP/DOWN) to turn the fireplace on or off.
Thermostatic Operation
To use the programmable thermostat feature:
- Naciśnij TRYB button until "THERMO" is displayed on the LCD.
- Adjust the desired SET temperature using the UP or DOWN buttons.
- The system will automatically turn the fireplace on or off to maintain the set temperature.
Timer and Clock Functions
The remote features a 9-hour countdown timer and a 24-hour clock. Consult the detailed instructions provided with your product for setting these functions.
Konserwacja
Wymiana baterii
When the low battery indicator appears on the LCD, replace all batteries in both the transmitter and receiver promptly. Use only fresh AA alkaline batteries. Dispose of old batteries responsibly.
Czyszczenie
Clean the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.
Składowanie
If the system will not be used for an extended period, remove the batteries from both the transmitter and receiver to prevent leakage and damage.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Pilot nie odpowiada | Low batteries; Receiver out of range; Unmatched security codes. | Replace batteries; Move closer to receiver; Re-match security codes. |
| Niespójne działanie | Interference from other RF devices; Weak signal. | Ensure no strong RF sources nearby; Check battery strength. |
| Wyświetlacz LCD jest pusty lub przyciemniony | Wyczerpane lub słabe baterie. | Wymień baterie. |
If troubleshooting steps do not resolve the issue, please contact SkyTech customer support.
Specyfikacje
- Numer modelu: 9800337
- Wymiary produktu: 7 x 4 x 4 cala
- Waga: Około 0.01 uncji (bez opakowania)
- Źródło zasilania: 6 baterie AA (w zestawie)
- Kolor: Czarny
- Dodatek specjalny: Programowalny termostat
- Maksymalna liczba obsługiwanych urządzeń: 1
- Zgodne urządzenia: Fire Pit, Fireplace (specifically Heat-N-Glo Battery Receive systems)
- Zakres RF: Do 20 stóp (bezkierunkowo)
- Kody bezpieczeństwa: 1 048 567 unikalnych kodów
Gwarancja i wsparcie
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official SkyTech webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.
Producent: Niebotech
