Cisco CP-8861-3PW-NA-K9=

Instrukcja obsługi telefonu wieloplatformowego Cisco IP Phone 8861

Model: CP-8861-3PW-NA-K9=

1. Wprowadzenie

The Cisco IP Phone 8861 with Multi-Platform Phone firmware is designed to enhance personal productivity in the workplace through its robust and user-friendly features. This office phone offers an ergonomic design, wideband audio for clear voice communications, reliable operation, and encrypted voice communications for enhanced security.

Telefon IP Cisco 8861

Figure 1: Cisco IP Phone 8861 device overview.

2. Główne cechy

  • Optimized for Cisco Webex Calling: This device is optimized for Cisco Webex Calling. A Cisco Webex subscription must be purchased separately.
  • Stałe klawisze funkcyjne: Umożliwia dostęp za pomocą jednego dotknięcia do podstawowych funkcji, takich jak obsługa klienta, wiadomości, książka telefoniczna, wstrzymywanie/wznawianie połączeń, przekierowanie i konferencja.
  • W pełni programowalny: Line keys can be configured to support directory numbers or call features like speed dialing.
  • Optymalna wydajność: Features Class 2 Power over Ethernet (PoE) and a built-in Gigabit Ethernet switch for PC connection.
  • Zgodność: Integrates with various industry-leading call control platforms, which may require additional licenses or services.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się następujące elementy:

  • Cisco IP Phone 8861 (CP-8861-3PW-NA-K9=)
  • Słuchawka i przewód spiralny
  • Kabel Ethernetowy
  • Dokumentacja

4. Konfiguracja

  1. Podłącz słuchawkę: Podłącz jeden koniec spiralnego przewodu słuchawkowego do gniazda słuchawki w podstawie telefonu, a drugi koniec do słuchawki.
  2. Połącz z siecią: Connect an Ethernet cable from your network switch or router to the network port on the back of the phone. If using Power over Ethernet (PoE), the phone will power on automatically.
  3. Połącz z komputerem (opcjonalnie): If you wish to connect a PC through the phone, use another Ethernet cable to connect your PC to the PC port on the back of the phone.
  4. Podłącz zasilanie (jeśli nie używasz PoE): If PoE is not available, connect an optional power adapter (sold separately) to the power port on the phone and then to a power outlet.
  5. Pierwsze uruchomienie: The phone will power on and begin its boot sequence. This may take a few minutes as it connects to the network and registers with your call control system.
  6. Konfiguracja: Follow any on-screen prompts or consult your system administrator for specific network and account configurations.

5. Instrukcja obsługi

5.1 Wykonywanie i odbieranie połączeń

  • Zadzwonić: Lift the handset, press the speaker button, or press a line button. Dial the number using the keypad.
  • Aby odebrać połączenie: Lift the handset, press the speaker button, or press the flashing line button.
  • Aby zakończyć połączenie: Replace the handset or press the End Call button.

5.2 Klawisze funkcyjne stałe

The phone features dedicated buttons for common functions:

  • Praca: Access various phone services.
  • Wiadomości: Access voicemail or message indicators.
  • Informator: Access corporate or personal directories.
  • Przytrzymaj/Wznów: Place an active call on hold or resume a held call.
  • Transfer: Transfer an active call to another party.
  • Konferencja: Zainicjuj połączenie konferencyjne.

5.3 Programowalne klawisze liniowe

The buttons alongside the display are programmable line keys. They can be configured by your system administrator to function as:

  • Additional phone lines (directory numbers).
  • Speed dial buttons for frequently called numbers.
  • Access to specific call features.

5.4 Regulacja głośności

Use the volume up (+) and volume down (-) buttons to adjust the volume of the handset, headset, or speakerphone during a call, or the ringer volume when the phone is idle.

5.5 Korzystanie ze słuchawek

The phone supports a headset for hands-free communication. Connect your headset to the dedicated headset port. Press the headset button to activate/deactivate headset mode. Note that a headset is sold separately.

5.6 Inne funkcje

  • Niemy: Press the Mute button to mute your microphone during a call. Press again to unmute.
  • Głośnik: Press the Speaker button to use the speakerphone. Press again to turn off the speakerphone.
  • Ponowne wybieranie: Access your call history and redial previous numbers.
  • Nagrania: Access and manage call recordings (if enabled by your system administrator).
  • Group Calling: Utilize features for group calls as configured by your system.

6. Konserwacja

  • Czyszczenie: Use a soft, dry cloth to clean the phone's exterior. Avoid abrasive cleaners or solvents.
  • Środowisko: Przechowuj telefon w suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
  • Kable: Sprawdź, czy wszystkie kable są solidnie podłączone i nie są ściśnięte ani uszkodzone.

7. Rozwiązywanie Problemów

7.1 Brak sygnału wybierania

  • Check all cable connections, especially the Ethernet cable to the network port.
  • Ensure the phone is receiving power (either via PoE or power adapter).
  • Contact your system administrator if the issue persists.

7.2 Nie można wykonywać ani odbierać połączeń

  • Verify the phone is registered with your call control system (check the display for status messages).
  • Ensure your network connection is active.
  • Confirm that your account is active and has calling privileges.
  • Contact your system administrator for assistance.

7.3 Słaba jakość dźwięku

  • Sprawdź połączenia słuchawki i zestawu słuchawkowego.
  • Dostosuj głośność za pomocą przycisków głośności.
  • Upewnij się, że nie występują żadne zakłócenia ze strony innych urządzeń elektronicznych.
  • Verify network quality and bandwidth.

8. Specyfikacje

Marka:
Cisco
Numer modelu:
CP-8861-3PW-NA-K9=
Waga przedmiotu:
5.1 funta
Wymiary opakowania:
14.92 x 12.64 x 4.72 cala
Kolor:
Czarny, Szary
Typ telefonu:
Telefon IP
Źródło zasilania:
Elektryczny przewodowy
Typ dialera:
Pojedyncza klawiatura
Typ systemu zgłoszeniowego:
Cyfrowy
Zgodne urządzenia:
Mobile devices, Cisco Webex Calling, other call control platforms
Możliwość połączeń konferencyjnych:
2 droga
Operacja wieloliniowa:
Operacja wieloliniowa
Identyfikacja dzwoniącego:
Tak

9. Gwarancja i wsparcie

For warranty information and technical support, please refer to the documentation provided with your product or visit the official Cisco support website. Specific warranty terms may vary by region and reseller.

Powiązane dokumenty - CP-8861-3PW-NA-K9=

Przedview Migracja oprogramowania sprzętowego telefonów IP Cisco serii 7800 i 8800: przewodnik Enterprise do MPP
Kompleksowy przewodnik szczegółowo opisujący proces konwersji oprogramowania telefonów IP Cisco serii 7800 i 8800 między oprogramowaniem układowym Enterprise a oprogramowaniem układowym MultiPlatform Phone (MPP). Obejmuje on kwalifikujące się modele, licencje i procedury migracji. Webnp. Połączenia i inne funkcje sterowania połączeniami oraz często zadawane pytania.
Przedview Cisco IP 7800, 8800, シ リ ー ズ, フ ァ ー ウ ェ ア 変 換 ガ イ ド: エ ン タ ー プ ラ イ ズ か ら MPP
Cisco IP: 7800, 8800, シ リ ー ズ の エ ン タ ー プ ラ イ ズ フ ァ ー ム ウ ェ ア と マ ル チCloud Upgraderや手動移行方法を含み、クラウド移行を支援します。
Przedview Przewodnik konfiguracji partnerów Cisco BroadWorks dla telefonów wieloplatformowych
Kompleksowy przewodnik dla partnerów dotyczący konfiguracji telefonów Cisco Multi-Platform Series (MPP) w celu zapewnienia współpracy operacyjnej z rozwiązaniem Cisco BroadWorks. Obejmuje on konfigurację, funkcje i najlepsze praktyki.
Przedview Cisco IP Phone 8800 Series Firmware Release 14.0(1)SR2 Release Notes
Release notes for Cisco IP Phone 8800 Series firmware version 14.0(1)SR2, detailing supported models, compatibility, installation procedures, known issues (caveats), and related documentation.
Przedview Przewodnik po konwersji telefonów IP Cisco: Enterprise na MPP i odwrotnie
Kompleksowy przewodnik po konwersji telefonów IP Cisco Unified na telefony wieloplatformowe (MPP) i odwrotnie. Obejmuje kwalifikujące się modele, aktualizacje oprogramowania sprzętowego, licencjonowanie i kroki migracji dla telefonów IP Cisco.
Przedview Przewodnik konfiguracji partnerów Cisco BroadWorks dla telefonów wieloplatformowych
W tym przewodniku opisano szczegółowe procedury konfiguracji telefonów Cisco Multi-Platform Phones (MPP) w celu zapewnienia bezproblemowej współpracy z rozwiązaniem Cisco BroadWorks, obejmujące konfigurację, funkcje i zarządzanie urządzeniem.