The Everbilt 1/6 HP Submersible Utility Pump (Model SUP54-HD) is designed for efficient water removal in various settings. This pump is ideal for use in most areas where unwanted water gathers, such as window wells, hot tubs, spas, and flooded basements. It can be totally submersed in water and is capable of pumping down to 3/8 inches from flat surfaces. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
Rycina 1: Przód view of the Everbilt 1/6 HP Plastic Utility Pump.
Ważne informacje dotyczące bezpieczeństwa
WARNING: To reduce the risk of electrical shock or injury, fully read and follow the instruction manual before attempting to install or operate this pump.
This pump should be installed in accordance with the National Electrical Code (NEC) and local codes and ordinances.
This pump should be connected to a 115V, GFCI outlet protected with a 5 AMP bezpiecznik lub wyłącznik automatyczny.
The use of an extension cord to power this pump is NOT permitted.
Always unplug this pump when moving or servicing the pump and its installation.
Never pump flammable or explosive liquids. Only water should be pumped with this pump.
Always wear ANSI Z87.1 safety glasses when operating this pump.
Rysunek 2: Strona view of the pump showing important warning and caution labels.
Instrukcje konfiguracji
The Everbilt utility pump is designed for easy setup. Follow these steps to prepare your pump for operation:
Attaching a Garden Hose: Attach a 1-1/4 inch inside diameter or larger garden hose (not included) to the pump's outlet. Ensure a secure connection to prevent leaks.
Attaching a Smaller Hose (if preferred): If you prefer to use a smaller hose, attach the adapter (Part B) to the pump (Part A) outlet. Then securely attach the smaller hose to the adapter.
Umieszczenie: Place the pump in the area where water needs to be removed. Ensure the pump is fully submerged in water before plugging it in. The pump is designed to drain water from flat surfaces down to 3/16 inches.
Rysunek 3: Góra view of the pump illustrating the hose connection point.
For a visual guide on setup and operation, refer to the video below:
Video 1: Everbilt HP Plastic Utility Pump Review. This video demonstrates the pump's features and basic setup, including how to attach a hose and submerge the pump for operation.
Instrukcja obsługi
Once the pump is properly set up and submerged, operating it is straightforward:
Zanurz pompę: Ensure the pump is fully submerged in the water you wish to remove. The pump is designed to handle solids up to 1/8 inch in diameter, but avoid placing it directly in mud or areas with excessive debris to prevent clogging.
Podłącz do zasilania: Plug the pump's 8-foot power cord into a 115V, GFCI protected outlet. The pump will begin operating automatically once plugged in. There is no on/off switch on the unit itself.
Monitor Discharge: Observe the water being discharged through the hose. The pump has a maximum flow rate of 28 gallons per minute and a maximum lifting height of 20 feet.
Odłączenie: Once the desired water level is reached or the area is dry, unplug the pump from the electrical outlet.
See the pump in action in the following videos:
Video 2: "How fast does this work?" This video demonstrates the pump's powerful water removal capabilities in a pool setting.
Video 3: "No more water in the basement (Review)." This video showcases the pump's effectiveness in removing standing water from a basement, highlighting its ability to pump water close to the floor.
Konserwacja
Regular maintenance ensures the longevity and optimal performance of your Everbilt utility pump:
Rutynowa kontrola: Periodically unplug the pump (making certain your hands are dry and you are not standing in water). Inspect the pump intake and remove any debris, such as leaves or small particles, that may have accumulated. Then plug the pump back into the grounded GFCI outlet.
Czyszczenie zatorów: If the pump becomes clogged with debris, follow these steps:
Odłącz pompę od zasilania elektrycznego.
Unscrew the screws (typically 6) and carefully remove the base plate.
Unscrew any additional screws (typically 4) and remove the impeller gasket.
Remove any debris around the shaft and impeller.
This pump contains cooling oil. Do NOT open the motor housing.
Rozwiązywanie problemów
If you encounter issues with your pump, refer to the common problems and solutions below:
Problem
Możliwa przyczyna
Rozwiązanie
Pump runs but only delivers a small amount of water.
Hose kinked or clogged; Impeller partially clogged; Air lock.
Check hose for kinks/clogs; Clean impeller; Tilt pump to release air.
Podczas uruchamiania pompy przepala się bezpiecznik lub wyłącznik automatyczny.
Motor overload; Incorrect fuse/breaker size; Impeller/shaft binding.
Check for motor obstruction; Ensure correct fuse/breaker; Clean impeller/shaft.
Motor runs for a short time, then stops.
Thermal overload protection activated; Low water level.
Allow pump to cool; Ensure sufficient water for continuous operation.
Specyfikacje
Funkcja
Szczegół
Marka
Everbilt
Numer modelu
SUP54-HD
Moc w koniach mechanicznych
1/6 HP (0.17 hp)
Tomtage
115 wolty
Maksymalna szybkość przepływu
28 galony na minutę (1680 GPH)
Maksymalna wysokość podnoszenia
20 stóp
Wymiary produktu
9.06" dł. x 5.51" szer. x 6.3" wys.
Waga przedmiotu
6.14 funtów
Tworzywo
Plastikowy
Źródło zasilania
Prąd zmienny/stały
Handles Solids Up To
1/8 inch diameter
Długość przewodu zasilającego
8 stóp
Figure 4: Performance data and specifications for Everbilt utility pumps.
Gwarancja i wsparcie
The Everbilt 1/6 HP Plastic Utility Pump comes with a 1-roczna ograniczona gwarancja. For warranty claims or technical support, please contact the distributor:
Everbilt Plastic Lawn Sprinkler Pump Use and Care Guide This guide provides comprehensive instructions for the Everbilt Plastic Lawn Sprinkler Pump, covering installation, operation, safety precautions, maintenance, and troubleshooting for models EFLS10-HD, EFLS15-HD, and EFLS20-HD.
