APC SMT750C

Instrukcja obsługi APC Smart-UPS SMT750C

Brand: APC | Model: SMT750C

Produkt ponadview

The APC Smart-UPS SMT750C is a 750VA / 500W Sinewave Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for servers, switches, routers, and other networking devices. It features Automatic Voltage Regulation (AVR) to maintain stable power levels and includes APC SmartConnect for cloud-enabled remote monitoring and management.

Przód view of the APC Smart-UPS SMT750C

Rycina 1: Przód view of the APC Smart-UPS SMT750C, a compact tower design.

Główne cechy obejmują:

Organizować coś

Follow these steps to set up your APC Smart-UPS SMT750C:

  1. Rozpakowywanie: Carefully remove the UPS unit and all accessories from the packaging. Verify that all components listed in the "What's in the Box" section are present.
  2. Podłączenie akumulatora: The UPS unit comes with batteries included. Refer to the SmartConnect Installation Guide for specific instructions on connecting the internal batteries. Ensure the battery connector is securely seated.
  3. Umieszczenie: Place the UPS in a cool, dry location, away from direct sunlight and heat sources. Ensure adequate ventilation around the unit. The unit is designed for tower placement.
  4. Podłączenie zasilania: Plug the UPS power cord (NEMA 5-15P) directly into a grounded wall outlet. Avoid using extension cords or surge protectors with the UPS input.
  5. Połączenie urządzenia: Connect your equipment (servers, switches, routers, etc.) to the NEMA 5-15R output receptacles on the rear of the UPS. Utilize the switchable outlet group for devices you wish to control remotely or shut down gracefully.
  6. Opłata początkowa: Allow the UPS to charge for at least 24 hours before connecting critical loads or performing any self-tests to ensure full battery capacity.
  7. Połączenie sieciowe (opcjonalnie): For SmartConnect features, connect an Ethernet cable from the UPS's SmartConnect Ethernet port to your network. Follow the SmartConnect Installation Guide for cloud monitoring setup.
Tył view of the APC Smart-UPS SMT750C showing input/output ports

Rysunek 2: Tył view of the UPS, highlighting the NEMA 5-15R output receptacles and network port.

Instrukcja obsługi

Your Smart-UPS SMT750C is designed for ease of use. Here are basic operating procedures:

APC Smart-UPS SMT750C in an office setting

Figure 3: The UPS seamlessly integrated into a typical office workstation, providing power protection.

Konserwacja

Proper maintenance ensures the longevity and optimal performance of your UPS:

Rozwiązywanie problemów

This section provides solutions to common issues. For more detailed troubleshooting, refer to the full User Manual (PDF) or contact APC support.

ProblemMożliwa przyczynaRozwiązanie
UPS nie włącza się.Akumulator nie jest podłączony lub jego poziom naładowania jest niski.Ensure battery connector is fully seated. Allow UPS to charge for 24 hours.
UPS wydaje ciągły sygnał dźwiękowy.On battery power due to power outage or low battery.Check utility power. If power is restored, the beeping should stop. If battery is low, allow it to recharge.
Podłączony sprzęt traci moc.UPS overloaded or battery depleted.Reduce load on the UPS. Check LCD for overload warning. Allow battery to recharge.
SmartConnect nie łączy się.Network issue or incorrect configuration.Sprawdź połączenie kablowe Ethernet. Sprawdź ustawienia sieciowe i reguły zapory sieciowej. Zapoznaj się z instrukcją SmartConnect.

Specyfikacje

FunkcjaSzczegół
Numer modeluSMT750C
Pojemność (VA/waty)750VA/500W
Wejście Voltage120 wolty
Gniazda wyjściowe(6) NEMA 5-15R
Wtyczka wejściowaNEMA 5-15P
Typ bateriiSealed Lead Acid (2 included)
Wymiary produktu (Gł. x Szer. x Wys.)14.53 x 5.43 x 6.34 cala
Waga przedmiotu27.5 funta
KolorCzarny

Gwarancja i wsparcie

APC provides comprehensive warranty and support for your Smart-UPS SMT750C:

For technical support, warranty claims, or additional information, please visit the official APC webodwiedź witrynę lub zapoznaj się z informacjami kontaktowymi podanymi w dokumentacji produktu.

Dołączone akcesoria

Your APC Smart-UPS SMT750C package includes:

Ważne informacje dotyczące bezpieczeństwa

Please read all safety instructions before installing or operating your UPS. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Always follow local regulations for battery disposal.

Filmy o produktach

No official seller videos are available for this product at this time. Please refer to the written instructions and diagrams for guidance.

Powiązane dokumenty - SMT750C

Przedview Instrukcja obsługi zasilacza APC Smart-UPS: Przewodnik po instalacji, bezpieczeństwie i rozwiązywaniu problemów
Oficjalna instrukcja obsługi zasilaczy UPS APC Smart-UPS. Obejmuje instalację, bezpieczeństwo, obsługę, konfigurację i rozwiązywanie problemów w modelach takich jak seria SMT. Zawiera podstawowe wskazówki dotyczące ochrony zasilania.
Przedview Instrukcja obsługi zasilacza APC Back-UPS serii BX: Instalacja, obsługa i rozwiązywanie problemów
Kompleksowa instrukcja obsługi zasilacza APC Back-UPS serii BX (500 VA do 2200 VA) firmy Schneider Electric, obejmująca instrukcje dotyczące bezpieczeństwa, opis produktu, funkcje operacyjne, instalację, rozwiązywanie problemów, serwis i informacje gwarancyjne.
Przedview APC Smart-UPS SMT750/1000/1500/2200/3000C Installation Guide
Comprehensive installation guide for APC Smart-UPS models SMT750C, SMT1000C, SMT1500C, SMT2200C, and SMT3000C. Covers setup, connections, and SmartConnect features for reliable power protection.
Przedview Instrukcja obsługi zasilacza UPS APC Smart-UPS: Zasilacz awaryjny serii SMT
Kompleksowa instrukcja obsługi zasilaczy awaryjnych (UPS) APC Smart-UPS serii SMT, obejmująca kwestie instalacji, obsługi, bezpieczeństwa, rozwiązywania problemów i specyfikacji modeli SMT750C do SMT3000CUS.
Przedview Instrukcja instalacji APC Smart-UPS: SMT750RMI2UC do SMT3000RMI2UC
Niniejszy podręcznik zawiera instrukcje instalacji modeli APC Smart-UPS SMT750RMI2UC, SMT1000RMI2UC, SMT1500RMI2UC, SMT2200RMI2UC i SMT3000RMI2UC. Obejmuje on montaż w szafie rack, podłączenia oraz konfigurację SmartConnect.
Przedview Instrukcja instalacji APC Smart-UPS dla SMT750IC, SMT1000IC, SMT1500IC, SMT2200IC, SMT3000IC
Niniejsza instrukcja instalacji zawiera instrukcje dotyczące konfiguracji modeli APC Smart-UPS SMT750IC, SMT1000IC, SMT1500IC, SMT2200IC i SMT3000IC. Obejmuje ona podłączanie UPS-a, przewody zasilające oraz informacje o funkcji SmartConnect.