Produkt ponadview
The Anderic RR7083TR Remote Control is engineered to serve as a direct replacement for original Hampton Bay and Harbor Breeze ceiling fan remotes. This remote simplifies fan operation by eliminating the need for complex programming. It is designed for seamless integration with compatible ceiling fan receivers already installed.
Główne cechy:
- Funkcjonalność odwrotna: Equipped with a dedicated Reverse key to easily change the direction of your ceiling fan's rotation for optimal comfort and air circulation.
- Prosta konfiguracja: No programming required. Configuration involves setting dip-switches inside the battery compartment to match those of the fan's receiver.
- Pełna kompatybilność: Specifically designed for Hampton Bay and Harbor Breeze ceiling fans that have an existing receiver installed, compatible with models such as FAN28R, UC7067FMRX, FAN2R, and UC7051R.
- Wygodna funkcjonalność: Features dedicated buttons for Light control (on/off), High, Medium, Low fan speeds, Off, and the Reverse function.
- Niezawodność: Constructed for durability and consistent performance.
Konfiguracja i instalacja
Instalacja baterii
The Anderic RR7083TR remote control requires one (1) CR123A battery (not included). To install the battery:
- Znajdź pokrywę komory baterii z tyłu pilota.
- Aby otworzyć komorę, przesuń pokrywę.
- Insert one CR123A battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, sliding it firmly until it clicks into place.
Dip-Switch Configuration
For the remote to communicate with your ceiling fan, its dip-switches must match the settings of the receiver unit installed in your fan. The receiver is typically located in the canopy (ceiling area) of your fan. Common compatible receivers include UC7067FMRX.
- With the battery compartment open, locate the series of small switches (usually 4) labeled 1, 2, 3, 4. These are the dip-switches.
- Access your ceiling fan's receiver unit and note the position (ON/OFF or UP/DOWN) of its corresponding dip-switches.
- Using a small tool (like a pen tip or a small screwdriver), adjust the dip-switches on your Anderic RR7083TR remote to exactly match the pattern of the dip-switches on your fan's receiver.
- Once matched, replace the battery compartment cover.
Notatka: If you cannot access your ceiling fan's receiver, there are 16 possible combinations for the 4 dip-switches. You may systematically try each combination until the remote successfully controls the fan. Each switch can be either ON (1) or OFF (0).
Rycina 1: Przód view of the Anderic RR7083TR Remote Control, showing buttons for Light, High, Med, Low, Off, and Reverse.
Rysunek 2: Strona view of the Anderic RR7083TR Remote Control, illustrating its ergonomic design and wall mount compatibility.
Instrukcja obsługi
Once the dip-switches are correctly set and the battery is installed, your Anderic RR7083TR remote is ready for use. The remote features the following buttons:
- Przycisk światła: Press to turn the fan light ON or OFF. If your fan supports dimming and uses incandescent bulbs, press and hold to dim or brighten the light.
- Wysoki przycisk: Sets the fan speed to High.
- Med Button: Sets the fan speed to Medium.
- Niski przycisk: Sets the fan speed to Low.
- Przycisk wyłączania: WYŁĄCZA wentylator.
- Przycisk cofania: Changes the direction of the fan blade rotation. This is useful for seasonal comfort (e.g., downdraft for cooling in summer, updraft for circulating warm air in winter).
Konserwacja
Wymiana baterii
When the remote's performance degrades (e.g., reduced range, inconsistent response), it is likely time to replace the battery. Follow the battery installation steps outlined in the Setup section to replace the CR123A battery.
Ważny: Always use the specified battery type (CR123A) to ensure optimal performance and prevent damage to the remote.
Rozwiązywanie problemów
- Pilot nie odpowiada:
- Sprawdź, czy akumulator jest prawidłowo zainstalowany i wystarczająco naładowany. W razie potrzeby wymień.
- Verify that the dip-switch settings on the remote exactly match those on your ceiling fan's receiver.
- Light Dimming Not Working:
- Ensure that your ceiling fan uses incandescent bulbs. LED or CFL bulbs may not be compatible with the dimming function of this remote or your fan's receiver.
- Funkcja odwrotna nie działa:
- Some older ceiling fan models or specific receivers may not support the reverse function via remote control. Confirm your fan's capabilities.
Specyfikacja produktu
| Specyfikacja | Szczegół |
|---|---|
| Wymiary produktu | 5.5 x 3 x 1 cala |
| Waga przedmiotu | 1.6 uncji |
| Numer modelu przedmiotu | RR7083TR |
| Wymagane baterie | 1 CR123A (not included) |
| Producent | Dan's Electronics Etc., Inc. |
| Kolor | Czarny/Srebrny |
| Maksymalna liczba obsługiwanych urządzeń | 1 |
| Kompatybilne urządzenia | 3-speed Fan, Fan |
Wsparcie i informacje kontaktowe
For further assistance, technical support, or inquiries regarding your Anderic RR7083TR remote control, please contact Anderic directly. Anderic is a company based in NC, USA, dedicated to providing high-quality replacement remote controls.
You can find more information and contact details by visiting the official Anderic store or webstrona.
