Wstęp
This manual provides detailed instructions for the installation, operation, and maintenance of your Soundstream PROX4.1 Bass Reconstruction Processor. The PROX4.1 is a 4-way electronic crossover designed to optimize audio signal distribution in car audio systems, particularly for applications requiring precise frequency separation and bass enhancement.
Image: Soundstream PROX4.1 Bass Reconstruction Processor, highlighting its function as a 4-way electronic crossover.
Główne cechy
- Wejście/wyjście sygnału: 2-channel RCA front/full range stereo input with an optional 180-degree phase inversion switch.
- High/Tweeter Signal Processing: Variable 1kHz-10kHz high-pass crossover.
- Mid-High Signal Processing: Variable 12dB 550Hz-3kHz high-pass and 4kHz-20kHz low-pass crossover.
- Mid-Low Signal Processing: Variable 12dB 50Hz-400Hz high-pass and 30Hz-5kHz low-pass crossover.
- Sterowanie subwooferem: Optional 3-stage 24dB subsonic filter and variable 50Hz-350Hz 12dB low-pass crossover.
- Typ montażu: Dash Mount for convenient access.
- Budowa: Durable aluminum material.
Image: Details on high/tweeter signal processing options, including variable 1kHz-10kHz high-pass crossover.
Image: Details on mid-high signal processing options, including variable 12dB 550Hz-3kHz high-pass and 4kHz-20kHz low-pass crossover.
Image: Details on mid-low signal processing options, including variable 12dB 50Hz-400Hz high-pass and 30Hz-5kHz low-pass crossover, and optional 3-stage 24dB subsonic filter.
Konfiguracja i instalacja
Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified car audio technician.
1. Połączenia zasilania
- Połącz +12 V terminal to the vehicle's positive battery terminal (fused).
- Połącz GND zacisk do czystego punktu uziemienia podwozia.
- Połącz REM (remote turn-on) terminal to the remote output of your head unit.
2. Połączenia wejściowe audio
The PROX4.1 accepts 2-channel RCA front/full range stereo input. Connect the RCA outputs from your head unit or other audio source to the PRZÓD W RCA inputs on the PROX4.1.
Obraz: Góra view of the PROX4.1 unit, illustrating the various input/output connections and control knobs for frequency adjustment.
3. Połączenia wyjściowe audio
Connect the RCA outputs from the PROX4.1 to the corresponding inputs on your amplifiers. The PROX4.1 provides the following outputs:
- FLAT OUT: Full-range signal output.
- LOW REAR OUT: Low-frequency output, typically for rear speakers or subwoofers.
- MID LOW OUT: Mid-low frequency output.
- MID HIGH OUT: Mid-high frequency output.
- WYSOKI WYJŚCIE: High-frequency output, typically for tweeters.
4. Phase Inversion Switch
An optional 180-degree phase inversion switch is available for the front/full range input. This can be used to correct phase issues in your audio system, which may improve bass response and sound staging.
Instrukcja obsługi
The PROX4.1 features several adjustable controls to fine-tune your audio system's frequency response.
1. Level Controls
Each output section (Flat, Low Rear, Mid Low, Mid High, High) has a dedicated level control knob. Adjust these to balance the volume of each frequency range relative to others.
2. Regulacja zwrotnicy
Use a small screwdriver to adjust the variable crossover points for each section:
- High Out: Adjust the high-pass crossover from 1kHz to 10kHz.
- Mid High Out: Adjust the high-pass crossover from 550Hz to 3kHz and the low-pass crossover from 4kHz to 20kHz.
- Mid Low Out: Adjust the high-pass crossover from 50Hz to 400Hz and the low-pass crossover from 30Hz to 5kHz.
- Low Rear Out: Adjust the low-pass crossover from 50Hz to 350Hz.
3. Subsonic Filter (Low Rear Out)
The Low Rear output includes an optional 3-stage 24dB subsonic filter. This filter helps protect subwoofers from playing frequencies below their effective range, improving sound quality and preventing damage. Engage this filter as needed.
4. Przełącznik mono/stereo
A switch is available to select between mono and stereo input processing. Ensure this is set correctly for your source signal.
Konserwacja
The Soundstream PROX4.1 is designed for reliable operation with minimal maintenance.
- Czyszczenie: Do czyszczenia zewnętrznej części urządzenia należy używać miękkiej, suchej ściereczki. Nie należy używać silnych środków chemicznych ani ściernych środków czyszczących.
- Znajomości: Periodically check all power and audio connections to ensure they are secure and free from corrosion. Loose connections can lead to signal loss or noise.
- Środowisko: Ensure the unit is installed in a location that is protected from excessive heat, moisture, and direct sunlight.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak wyjścia audio | No power, incorrect wiring, input/output levels too low. | Check power connections (12V, GND, REM). Verify RCA input/output connections. Increase level controls. |
| Zniekształcony dźwięk | Input signal too high, output levels too high, incorrect crossover settings. | Reduce input signal level from head unit. Lower output level controls on PROX4.1. Adjust crossover frequencies. |
| Hissing or background noise | Ground loop, poor RCA cable shielding, gain staging issues. | Ensure proper grounding. Use high-quality shielded RCA cables. Adjust gain levels carefully, starting low. Isolate power and audio cables. |
| Słaby lub brak basu | Incorrect low-pass crossover setting, phase issue, subwoofer level too low. | Adjust Low Rear Out low-pass frequency. Check 180-degree phase switch. Increase Low Rear Out level. |
Specyfikacje
| Nazwa modelu | PROX4.1 |
| Typ montażu | Uchwyt na deskę rozdzielczą |
| Tworzywo | Aluminium |
| Liczba obwodów | 5 (referring to 5 output channels) |
| Wymiary produktu | 7.5 x 1 x 5 cala |
| Waga przedmiotu | 1.55 funtów |
| Technologia łączności | RCA |
| Źródło zasilania | Przewodowy elektryczny (12 V DC) |
| UPC | 709483056541 |
Oficjalne filmy produktowe
Wideo: Produkt w całościview and features demonstration. This video provides a general look at the Soundstream PROX4.1 and its capabilities.
Video: Installation guide or setup tips. This video may offer visual assistance for connecting the PROX4.1 to your car audio system.
Gwarancja i wsparcie
The Soundstream PROX4.1 Bass Reconstruction Processor comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Soundstream webstrona.
For technical support or service inquiries, please contact Soundstream customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.
