1. Wprowadzenie
This instruction manual provides essential information for the safe and effective use of your Baffect Magnetic Double-Sided Window Cleaner. This model is specifically designed for window glass with a thickness between 15 mm i 26 mm. Please read this manual thoroughly before first use to ensure optimal performance and safety.
Image 1.1: Baffect Magnetic Double-Sided Window Cleaner and its box.
2. Ważne ostrzeżenia dotyczące bezpieczeństwa
OSTRZEŻENIE: The magnets in this device are extremely powerful. Improper handling can cause severe finger injuries or damage to the product or glass. Always exercise extreme caution.
- Grubość szkła: Ensure you have selected the correct model for your window glass thickness. This model is for 15-26mm glass. Using a cleaner with magnets too strong for thin glass can make it difficult to move, while magnets too weak for thick glass will not adhere properly.
- Bezpieczeństwo palców: Keep fingers clear when bringing the two magnetic halves together or separating them. The magnetic force can cause them to snap together suddenly. Use the plastic separator provided when storing the device.
- Lina bezpieczeństwa: Always attach the included 2.5m safety rope to your wrist or a secure anchor point when cleaning the exterior side of windows to prevent the outer unit from falling.
- Początkowe umiejscowienie: When placing the cleaner on the window, apply the outside part to the glass first. Then, place the inside half on the interior side of the glass, maintaining a distance of at least 8 inches from the outside part. Slowly slide them together along the glass until they connect. Do not attach the two parts directly facing each other on the glass without this separation.
Image 2.1: Safe Use Guidelines for the Magnetic Window Cleaner.
Image 2.2: Proper Attachment Technique for the Window Cleaner.
3. Zawartość opakowania
Sprawdź, czy w pakiecie znajdują się wszystkie komponenty:
- Magnetic Window Cleaner Unit (2 halves)
- Cleaning Sponges (pre-installed or spare)
- Rubber Squeegee Strips (pre-installed or spare)
- Safety Rope (2.5m)
- Plastic Separator
- Instrukcja obsługi
Obraz 3.1: Wybuch View of Product Components.
4. Konfiguracja
4.1. Determine Window Glass Thickness
Before using, it is crucial to determine the thickness of your window glass to ensure compatibility and effective cleaning. This model is suitable for 15-26 mm szkło.
- Zmierz total length of your window frame.
- Zmierz inner length ramy okna.
- Zmierz outer length ramy okna.
- Calculate the glass thickness using the formula: Window Glass Thickness = Total Frame Length - Inner Frame Length - Outer Frame Length.
Image 4.1: Guide to Measuring Window Glass Thickness.
4.2. Prepare the Cleaner
- Separate the Halves: Rotate the two halves of the cleaner 90 degrees in opposite directions to easily separate them.
- Gąbki do moczenia: Submerge the cleaning sponges in water until fully saturated.
- Zastosuj detergent: Apply your preferred window cleaning detergent evenly to both cleaning sponges.
- Zamocuj linę bezpieczeństwa: Securely attach the safety rope to your wrist or a fixed object to prevent accidental drops of the outer unit.
Image 4.2: Preparation Steps for Window Cleaning.
5. Instrukcja obsługi
Aby skutecznie umyć okna, wykonaj następujące czynności:
- Place the Cleaner: Following the safety instructions in Section 2, carefully place the outer half of the cleaner on the exterior side of the window. Then, place the inner half on the interior side, allowing the magnets to connect through the glass.
- Initial Wipe (Optional): If you are using a spray detergent directly on the window, you may skip this step. Otherwise, begin by wiping the soap suds in an arc-shaped route from the bottom to the top, with the pointed end of the cleaner facing upwards.
- Remove Water Stains: Wipe and remove water stains in an arc-shaped route from the top to the bottom, with the pointed end of the cleaner facing downwards.
- Ostateczne czyszczenie: Wipe around the edges of the window, moving in the direction of the pointed end of the cleaner to ensure thorough cleaning.
Image 5.1: Recommended Cleaning Motions.
Always ensure the pointed end of the window cleaner moves first during the cleaning process for optimal results.
Image 5.2: Cleaning Path and Triangular Design.
6. Konserwacja
6.1. Wymiana akcesoriów
The cleaning sponges and rubber squeegee strips are detachable and can be replaced when worn out. To replace them, simply rotate the plastic fastener 90 degrees. Ensure the new squeegee is inserted correctly into its groove.
Image 6.1: Replacing Sponges and Squeegee.
6.2. Czyszczenie i przechowywanie
After each use, rinse the sponges and squeegee strips thoroughly with clean water. Allow them to air dry completely before storing. Always use the plastic separator between the two magnetic halves when storing to prevent accidental snapping and potential damage or injury.
7. Rozwiązywanie Problemów
- Cleaner does not stick or falls off: The glass may be too thick for this model (15-26mm). Verify your window glass thickness using the method described in Section 4.1.
- Cleaner is difficult to move: The magnets may be too strong for your glass thickness, indicating your glass is thinner than 15mm. Verify your window glass thickness.
- Leaves streaks on the window: This can be caused by too much detergent, insufficient rinsing of the sponges, or improper wiping technique. Try reducing the amount of detergent, ensuring sponges are clean, and following the recommended wiping motions in Section 5.
- Accidental snapping of magnets: Always handle with care and use the plastic separator for storage. Refer to Section 2 for detailed safety warnings.
8. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | Baffect |
| Model | 15-26 mm |
| Kompatybilna grubość szkła | 15 mm - 26 mm |
| Wymiary produktu | 6.3" szer. x 5.3" wys. (ok. 6.3 x 2.76 x 5.31 cala) |
| Waga przedmiotu | 1.31 funtów |
| Długość liny bezpieczeństwa | 2.5 metrów |
9. Gwarancja i wsparcie
Baffect is committed to providing user-friendly products and considerate experience. Detailed instructions are provided with every purchase. If you encounter any issues during use or require assistance, please do not hesitate to reach out to Baffect customer support. Our team is dedicated to providing detailed guidance to resolve operational problems.
For specific warranty information, please refer to the product packaging or contact Baffect customer service directly.
