1. Wprowadzenie
This manual provides instructions for the proper use and handling of the Brother BT5000Y Yellow Ink Bottle. This ink bottle is designed for use with compatible Brother DCP, HL, and MFC series inkjet printers, offering a yield of approximately 5,000 pages. Adhering to these instructions will help ensure optimal print quality and prolong the life of your printer.
Image 1: Brother BT5000Y Yellow Ink Bottle. This image displays the yellow ink bottle, which is the subject of this manual.
2. Informacje dotyczące bezpieczeństwa
Please read and follow these safety precautions to prevent injury or damage to your product and printer:
- Przechowuj butelki z tuszem poza zasięgiem dzieci.
- Nie połykać tuszu. W razie połknięcia natychmiast zwrócić się o pomoc lekarską.
- Unikać kontaktu z oczami. W przypadku dostania się tuszu do oczu, natychmiast przepłukać je wodą i zwrócić się o pomoc lekarską.
- Avoid prolonged contact with skin. Wash hands thoroughly after handling ink.
- Przechowuj butelki z tuszem w pozycji pionowej, w chłodnym i ciemnym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
- Do not attempt to disassemble or modify the ink bottle.
- Use only genuine Brother ink bottles to ensure optimal performance and prevent damage to your printer.
Image 2: Back of Brother Ink Bottle Packaging. This image shows the rear of the ink bottle packaging, highlighting the "Use Genuine" seal and manufacturer details.
3. Zawartość opakowania
The Brother BT5000Y Yellow Ink Bottle package typically includes:
- One (1) Brother BT5000Y Yellow Ink Bottle (48.8ml)
4. Konfiguracja i instalacja
Follow these steps to refill the yellow ink tank in your compatible Brother inkjet printer.
4.1. Preparing the Printer
- Ensure your printer is powered on.
- Open the ink tank cover on your printer. This cover typically provides access to the individual ink tanks.
- Locate the yellow ink tank. It is usually labeled with a "Y" for Yellow.
- Carefully open the cap of the yellow ink tank.
4.2. Refilling the Ink Tank
- Unscrew the cap from the Brother BT5000Y Yellow Ink Bottle.
- Insert the nozzle of the ink bottle firmly into the yellow ink tank's refill port. The bottle is designed to fit securely and prevent spills.
- Allow the ink to drain completely into the tank. Do not squeeze the bottle. The ink will stop flowing automatically once the tank is full.
- Once the ink has stopped flowing, carefully remove the ink bottle from the tank.
- Replace the cap on the yellow ink tank securely.
- Zamknij pokrywę zbiornika z tuszem w drukarce.
Image 3: Brother Ink Bottle Nozzle. This image shows the design of the ink bottle's nozzle, which facilitates spill-free refilling into compatible Brother ink tanks.
5. Instrukcja obsługi
After refilling the ink tank, your printer is ready for use. The printer's internal system will automatically detect the new ink level. If you experience any issues with print quality, refer to your printer's user manual for instructions on performing print head cleaning or alignment.
6. Konserwacja
- Always keep the ink bottle cap securely closed when not in use to prevent ink from drying out or contamination.
- Store unused ink bottles in their original packaging until needed.
- Do not expose ink bottles to extreme temperatures or direct sunlight.
- Ensure the printer's ink tank caps are properly closed after refilling to prevent evaporation and maintain print quality.
7. Rozwiązywanie Problemów
Jeśli napotkasz problemy związane z tuszem, rozważ następujące kwestie:
- Ostrzeżenie o niskim poziomie atramentu: If your printer displays a low ink warning after refilling, ensure the ink tank cap was properly closed and the ink bottle was fully drained. Some printers may require a few print cycles to recalibrate ink levels.
- Poor Print Quality (Yellow): If yellow prints appear faded or streaky, check if the yellow ink tank is sufficiently filled. If the tank is full, refer to your printer's manual for instructions on performing a print head cleaning or nozzle check.
- Ink Spills: In case of an ink spill, wipe immediately with a damp szmatką. W przypadku uporczywych plam użyj łagodnego detergentu.
- Drukarka nie rozpoznaje tuszu: Ensure you are using a genuine Brother ink bottle. If the issue persists, consult your printer's user manual or Brother customer support.
8. Specyfikacje
| Nazwa modelu | BT5000Y |
| Marka | Brat |
| Kolor tuszu | Żółty |
| Wydajność strony | Up to 5,000 pages (based on Brother Original Methodology with test patterns ISO/IEC 24712) |
| Kompatybilne urządzenia | DCP-T500W, DCP-T700W, MFC-T800W, DCP-T510W, DCP-T710W, MFC-T810W, MFC-T910DW, HL-T4000DW, MFC-T4500DW, DCP-T220, DCP-T520W, DCP-820DW, MFC-T920DW |
| Baza tuszu | Woda |
| Liczba elementów | 1 Ink Bottle |
| Producent | Brat |
| ASIN | B0719423KP |
| UPC | 4977766748155 |
9. Informacje o gwarancji
For detailed warranty information regarding your Brother BT5000Y Yellow Ink Bottle, please refer to the warranty documentation included with your Brother printer or visit the official Brother website. Using non-genuine ink may void your printer's warranty.
10. Obsługa klienta
If you require further assistance or have questions not covered in this manual, please contact Brother customer support or visit their official webstrona:
- Oficjalny Brat Webstrona: www.brother.com/original
- Odwiedź sklep Brother na Amazon: Sklep Brother
