Anderic RR7080T

Anderic UC7080T Remote Control User Manual

Model: RR7080T

Wstęp

This manual provides comprehensive instructions for the Anderic RR7080T remote control, designed as a direct replacement for original equipment Hampton Bay and Harbor Breeze ceiling fan remotes, including models like UC7080T and CHQ7080T. This remote offers full control over your ceiling fan's functions, including fan speed, light operation with dimming, and fan direction reversal.

Anderic RR7080T remote control, angled view

Rysunek 1: Kątowy view of the Anderic RR7080T remote control, showing the layout of its buttons for fan speed, light, and reverse functions.

Konfiguracja i instalacja

The Anderic RR7080T remote control requires alignment of its dip-switches to match the pattern of your ceiling fan receiver. This unit has 16 different code combinations. Before beginning, ensure your fan is operated in "HIGH SPEED" and the light is in the "ON" condition at the switch knob.

1. Setting the Code on the Remote (Transmitter)

  1. Zdejmij pokrywę baterii. Naciśnij mocno poniżej strzałki i zdejmij pokrywę baterii.
  2. Slide the code switches to your desired up or down position. The factory setting is all up; do not use this position. Use a small screwdriver or a ballpoint pen to slide firmly up or down.
  3. Załóż pokrywę baterii na nadajniku.

2. Setting the Code on the Receiver

  1. Slide the code switches on your fan's receiver to the exact same positions as set on your remote (transmitter).

Note: The remote and receiver depicted in images may look different than your actual product, but the dip switch concept remains the same.

Diagram showing dip switch settings on the remote and receiver

Figure 2: Installation and operating instructions diagram, illustrating how to set the code switches on both the remote (transmitter) and the ceiling fan receiver.

Z powrotem view of Anderic RR7080T remote with battery compartment open and wall mount bracket

Rysunek 3: Tył view of the Anderic RR7080T remote control with the battery cover removed, revealing the battery compartment and dip switches. The included wall mount bracket is also visible.

Instrukcja obsługi

The Anderic RR7080T remote provides intuitive control over your ceiling fan and light functions. Familiarize yourself with the button layout for optimal use.

Przód view of Anderic RR7080T remote control

Rycina 4: Przód view of the Anderic RR7080T remote control, clearly showing all control buttons for fan speed, light, and reverse functions.

Konserwacja

Wymiana baterii

The Anderic RR7080T remote control requires one 9V battery. When the remote's performance degrades or it stops responding, it's likely time to replace the battery.

  1. Slide off the battery cover located on the back of the remote.
  2. Wyjmij starą baterię 9V.
  3. Włóż nową baterię 9 V, zwracając uwagę na prawidłową biegunowość (+/-).
  4. Wsuń pokrywę baterii z powrotem na miejsce, aż zaskoczy.

Stare baterie należy utylizować w sposób odpowiedzialny, zgodnie z lokalnymi przepisami.

Rozwiązywanie problemów

If your Anderic RR7080T remote control is not functioning as expected, please refer to the following common issues and solutions:

ProblemMożliwa przyczyna / rozwiązanie
Pilot nie odpowiada
  • Check battery: Ensure the 9V battery is new and correctly installed.
  • Dip switches: Verify that the dip switches on both the remote and receiver are set to the exact same pattern.
  • Distance: Ensure you are within range of the receiver.
Światło nie przyciemnia się
  • Bulb compatibility: Ensure your light bulbs are dimmable.
  • Hold button: Press and hold the LIGHT/DIMMER button to activate dimming. A quick press will only toggle on/off.
Fan not changing speed or direction
  • Dip switches: Re-check the dip switch settings on both units.
  • Receiver issue: The issue might be with the fan's receiver unit, not the remote.

Specyfikacje

Gwarancja i wsparcie

Anderic is committed to providing high-quality replacement remote controls and accessories. This product is designed to meet stringent quality standards.

Aby uzyskać pomoc, odwiedź naszą stronę webstronę lub skontaktuj się z nami bezpośrednio:

Proszę zachować dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.

Powiązane dokumenty - RR7080T

Przedview Instrukcja obsługi pilota ANDERIC® RRTX001R
Instrukcja obsługi pilota ANDERIC® RRTX001R zawierająca szczegółowe informacje na temat instalacji baterii, instrukcji parowania, funkcji produktu i instalacji uchwytu ściennego.
Przedview Anderic RR3720 Projector Universal Remote Control - Setup Guide and Code List
Comprehensive user guide for the Anderic RR3720 universal projector remote control, detailing setup procedures, code input methods, code search functionality, learning capabilities, and a complete list of compatible projector codes.
Przedview Anderic Universal Thermostatic Ceiling Fan Remote Control Kit Installation and Use Guide
Comprehensive guide for installing and operating the Anderic HD3 Universal Thermostatic Ceiling Fan Remote Control Kit, including safety information, troubleshooting, and warranty details.
Przedview Instrukcja instalacji Anderic FAN9T i FAN28R/UC7067FCRX
Szczegółowa instrukcja instalacji systemu zdalnego sterowania wentylatorami sufitowymi Anderic FAN9T i FAN28R/UC7067FCRX, obejmująca m.in. okablowanie odbiornika, parowanie pilota i instalację baterii.
Przedview Instrukcja instalacji odbiornika wentylatora sufitowego Anderic UC7058RY
Szczegółowa instrukcja instalacji i parowania odbiornika do wentylatora sufitowego Anderic UC7058RY. Zawiera informacje o kompatybilności z pilotami Anderic RR7078TR i RR7083TR. Zawiera wskazówki krok po kroku dotyczące konfiguracji i synchronizacji pilota.
Przedview Instrukcja obsługi pilota zdalnego sterowania wentylatora sufitowego Anderic FD40-H02R / RRTX012
W niniejszym podręczniku znajdują się instrukcje obsługi pilota zdalnego sterowania do wentylatorów sufitowych Anderic FD40-H02R / RRTX012, obejmujące takie funkcje, jak prędkość wentylatora, sterowanie oświetleniem, timery i instalacja.