THERMOS Glass Vacuum Insulated Pump Pot Instruction Manual

Wstęp

Thank you for choosing the THERMOS Glass Vacuum Insulated Pump Pot. This manual provides essential information for the safe and efficient use of your new thermal carafe. Designed for maximum temperature retention, this 2-quart (64 ounces) metallic gray pump pot keeps beverages hot for 12 hours and cold for 24 hours. Its durable glass vacuum insulation and user-friendly features make it ideal for various settings.

Ważne informacje dotyczące bezpieczeństwa

• Nie use in a microwave oven or on any type of stovetop.
• Nie overfill the pump pot. Leave space for the pump mechanism.
• Nie use for carbonated beverages or dry ice, as pressure buildup can cause the lid to eject or contents to spray.
• Nie use for storing or carrying ice cubes, as this may damage the glass liner.
• Przechowywać w miejscu niedostępnym dla dzieci po napełnieniu gorącymi płynami.
• Always ensure the lid is securely closed before transporting.

Produkt ponadview

The THERMOS Glass Vacuum Insulated Pump Pot features a robust design for optimal performance and ease of use. Key components include the main body with glass vacuum insulation, a pump-action dispenser, a convenient carrying handle, and a 360-degree swivel base.

Obraz 1: Przód view of the THERMOS Glass Vacuum Insulated Pump Pot in metallic gray. The pump mechanism and carrying handle are visible.

Obraz 2: Widok z góry na dół view of the THERMOS Pump Pot with the lid open, revealing the wide mouth opening and the removable pump assembly for easy cleaning and refilling.

Konfiguracja i początkowe użycie

1. Rozpakowywanie: Carefully remove the pump pot from its packaging. Retain packaging for future storage or transport.
2. Czyszczenie wstępne: Before first use, wash all parts with warm, soapy water. Rinse thoroughly and dry. The pump assembly can be easily removed for detailed cleaning.
3. Podgrzewanie wstępne/Wstępne schładzanie: For best results, pre-heat the interior with hot water for 5-10 minutes before filling with hot beverages, or pre-cool with cold water/ice for 5-10 minutes before filling with cold beverages. Empty the pre-heating/pre-cooling water before adding your desired beverage.
4. Pożywny: Open the lid by pressing the two side buttons and lifting. Pour your hot or cold beverage into the wide mouth opening. Do not fill past the neck of the pot to allow space for the pump mechanism.
5. Zabezpieczanie pokrywy: Reinsert the pump assembly and close the lid firmly until it clicks into place. Ensure the lock switch is in the 'CLOSED' position for transport or to prevent accidental dispensing.

Instrukcja obsługi

Dispensing Beverages

1. Odblokować: Locate the lock switch on the top of the lid and slide it to the 'OPEN' position.
2. Puchar Pozycji: Place your cup or mug directly under the dispenser spout.
3. Pompa: Press down firmly on the pump button at the top of the lid. The beverage will dispense from the spout. Release the button to stop the flow.
4. Swivel Base: The 360-degree swivel base allows you to easily rotate the pot to direct the pour without lifting the entire unit, making it convenient for self-service.
5. Zamek: After dispensing, slide the lock switch back to the 'CLOSED' position to prevent accidental spills and maintain temperature.

Utrzymanie temperatury

The glass vacuum insulation ensures maximum temperature retention:

• Gorące napoje: Keeps hot for up to 12 hours.
• Cold Beverages: Keeps cold for up to 24 hours.

Pielęgnacja i konserwacja

• Tylko pranie ręczne: This pump pot is nie nadaje się do mycia w zmywarce. Hand wash all components with warm, soapy water.
• Czyszczenie wnętrza: The wide mouth opening allows for easy access to the interior for thorough cleaning. The pump assembly can be detached for separate cleaning.
• Wysuszenie: Przed ponownym złożeniem i przechowywaniem należy upewnić się, że wszystkie części są całkowicie suche, aby zapobiec powstawaniu zapachów i pleśni.
• Odporny na odciski palców: The metallic gray exterior is designed to be fingerprint resistant, making it easy to maintain its appearance with a simple wipe.

Rozwiązywanie problemów

• Liquid not dispensing: Ensure the lock switch is in the 'OPEN' position. Check if the pump assembly is correctly installed and not clogged.
• Poor temperature retention: Ensure the lid is securely closed and the lock switch is in the 'CLOSED' position. Verify that the pump pot was properly pre-heated or pre-cooled before filling.
• Przeciek: Check that the lid and pump assembly are correctly seated and tightened. Inspect gaskets for any damage or wear.

Specyfikacje

Gwarancja i wsparcie

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official THERMOS webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.