HP Aruba 2930F 48G PoE+ 4SFP+ Switch User Manual

1. Wprowadzenie

This manual provides essential instructions for the installation, operation, and maintenance of the HP Aruba 2930F 48G PoE+ 4SFP+ Switch (Model JL256A#ABB). It is intended for network administrators and technical personnel responsible for deploying and managing network infrastructure. Please read this manual thoroughly before operating the device.

2. Informacje dotyczące bezpieczeństwa

Aby zapobiec obrażeniom ciała i uszkodzeniom sprzętu, należy przestrzegać następujących środków ostrożności:

• Zapewnij prawidłowe uziemienie urządzenia.
• Do not operate the switch in wet or humid conditions.
• Należy używać wyłącznie zasilacza dostarczonego lub określonego przez producenta.
• Unikaj blokowania otworów wentylacyjnych, aby zapobiec przegrzaniu.
• Przed przystąpieniem do czynności konserwacyjnych lub instalacyjnych należy odłączyć zasilanie.

3. Koniec produktuview

The Aruba 2930F Switch Series is designed for modern digital workplaces, offering an integrated wired and wireless approach. This basic Layer 3 access switch provides advanced security and network management capabilities, suitable for enterprise edge, SMB, and branch office environments.

3.1 Główne cechy

• 48x 10/100/1000BASE-T PoE+ Ports
• 4x 10GbE SFP+ Ports
• Power over Ethernet Plus (PoE+) support
• Layer 3 capabilities
• Integration with Aruba ClearPass Policy Manager and Aruba AirWave

3.2 Układ panelu przedniego

The front panel of the HP Aruba 2930F switch features various ports and LED indicators for status monitoring.

Rysunek 1: Front Panel of HP Aruba 2930F Switch. This image displays the entire front face of the network switch, highlighting the array of 48 RJ45 Ethernet ports (10/100/1000 BASE-T PoE+), four 10GbE SFP+ uplink ports, and various status LEDs including those for Speed Mode, PoE Mode, UID, and Console Ports. The model number "2930F JL256A" is visible on the right side.

Na panelu przednim znajdują się:

• 10GbE SFP+ Ports (49A-52): Four uplink ports for high-speed fiber or copper connections.
• 10/100/1000 BASE-T PoE+ Ports (1-48): Forty-eight RJ45 Ethernet ports supporting Power over Ethernet Plus.
• Diody LED trybu prędkości:
  • Wył.: 10 lub 100 Mb/s
  • Slow Flash: 1 Gbps
  • On: 10 Gbps
• Diody LED trybu PoE:
  • Off: No PoE
  • Slow Flash: Fault/Over Budget
  • On: PoE enabled
• Porty konsoli: Includes a standard RJ45 console port and a micro-USB console port for local management.
• LED Mode Button: Toggles the function of the port LEDs.
• Reset Clear Button: Used to reset the switch or clear configurations.

4. Konfiguracja i instalacja

4.1 Rozpakowanie

Carefully remove the switch and all accessories from the packaging. Verify that all components listed in the packing list are present and undamaged. Retain the packaging for future transport or storage.

4.2 Opcje montażu

The HP Aruba 2930F switch can be installed in a standard 19-inch equipment rack or placed on a desktop.

• Montaż w szafie: Attach the provided rack-mount brackets to the sides of the switch using the supplied screws. Secure the switch into the rack using appropriate rack screws. Ensure adequate airflow around the device.
• Umieszczenie na pulpicie: Place the switch on a flat, stable surface. Ensure there is sufficient space for ventilation and cable routing.

4.3 Podłączanie zasilania

Connect the power cord to the AC power inlet on the rear panel of the switch and then to a grounded electrical outlet. Ensure the power source meets the voltagwymagania (230 V).

4.4 Połączenia sieciowe

• Porty Ethernet (1-48): Connect standard RJ45 Ethernet cables from your network devices (computers, access points, IP phones) to these ports. These ports support PoE+ for compatible devices.
• SFP+ Ports (49A-52): Insert compatible SFP+ transceivers into these ports, then connect fiber optic or direct attach copper cables for uplink connections to other switches or network devices.

4.5 Połączenie z konsolą

For initial configuration and command-line interface (CLI) access, connect a console cable (RJ45-to-DB9 or micro-USB) from your management workstation to one of the console ports on the switch's front panel.

5. Instrukcja obsługi

5.1 Włączanie

After all connections are made, ensure the power cord is securely connected. The switch will power on automatically. Observe the system LEDs for boot-up status.

5.2 Wskaźniki LED

The front panel LEDs provide visual status of the switch and its ports:

• Dioda systemowa: Indicates overall system status (e.g., power, fault).
• Diody LED portów: Each port has LEDs that indicate link status, activity, speed, and PoE status. Refer to Section 3.2 for detailed Speed Mode and PoE Mode LED interpretations.
• Dioda LED UID: The Unit Identification LED helps locate the switch in a rack.

5.3 Konfiguracja początkowa

Access the switch's command-line interface (CLI) via the console port or a web-based graphical user interface (GUI) for initial configuration. Refer to the comprehensive ArubaOS-Switch Management and Configuration Guide for detailed instructions on network settings, VLANs, security, and other advanced features.

6. Konserwacja

6.1 Czyszczenie

Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

6.2 aktualizacji oprogramowania sprzętowego

Regularly check the HP/Aruba support website for the latest firmware updates. Applying updates can improve performance, add new features, and address security vulnerabilities. Follow the provided instructions carefully when performing firmware upgrades.

7. Rozwiązywanie Problemów

This section provides solutions to common issues. For more complex problems, consult the full product documentation or contact technical support.

• Brak zasilania: Verify the power cord is securely connected to both the switch and the power outlet. Check the power source.
• Brak łącza w porcie: Ensure the Ethernet or SFP+ cable is properly connected at both ends. Check the connected device. Verify the port LED status.
• Urządzenie PoE nie włącza się: Check the PoE Mode LED for the port. If flashing slowly, there might be a fault or over-budget condition. Ensure the connected device is PoE compatible and within the switch's power budget.
• Przełącznik nie odpowiada: If the switch is unresponsive, try pressing the Resetuj Wyczyść button. A brief press may initiate a soft reset, while a longer press (consult full documentation for exact timing) may restore factory defaults.

8. Specyfikacje techniczne

9. Gwarancja i wsparcie

9.1 Gwarancja na produkt

This HP Aruba product is covered by a manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage details, please refer to the warranty documentation included with your product or visit the official HP/Aruba support webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

9.2 Wsparcie techniczne

For technical assistance, troubleshooting, or additional product information, please contact HP/Aruba technical support. Support resources, including documentation, FAQs, and contact information, are available on the official HP/Aruba website. When contacting support, have your product model number (JL256A#ABB) and serial number ready.

Możesz odwiedzić Sklep HP na Amazon for more information on HP products.