1. Wprowadzenie
This manual provides essential information for the installation and care of your NISSAN Genuine Outside Mirror Cover, Part Number 96312-6A01H. This product is designed as a direct replacement or upgrade for compatible NISSAN vehicles. Please read this manual thoroughly before proceeding with installation to ensure proper fitment and safe use.

Image 1: NISSAN Genuine Outside Mirror Cover (Model 96312-6A01H). This image shows the exterior mirror cover, typically made of plastic, designed to fit over the side mirror housing.
2. Informacje dotyczące bezpieczeństwa
- Always ensure the vehicle is turned off and the parking brake is engaged before beginning any installation.
- Podczas montażu należy nosić odpowiedni sprzęt ochrony osobistej, taki jak rękawice i okulary ochronne.
- Jeśli masz wątpliwości co do któregokolwiek etapu procesu instalacji, zalecamy zwrócenie się o pomoc do wykwalifikowanego technika samochodowego.
- Trzymaj małe części z dala od dzieci, aby zapobiec ryzyku zadławienia.
3. Zgodność
This NISSAN Genuine Outside Mirror Cover (Part No. 96312-6A01H) is compatible with the following NISSAN vehicle models:
- Kompatybilne modele pojazdów: Dayz, Dayz Roox
- Numery kompatybilnych modeli: B21A, B21W
- Kompatybilne lata: June 2013 - March 2015
Ważny: Vehicle compatibility may vary depending on the specific trim level or grade, even for the same model and year. Always verify compatibility with the manufacturer or a trusted automotive parts specialist before purchasing and attempting installation.
4. Zawartość opakowania
W przesyłce powinny znaleźć się następujące elementy:
- 1 x NISSAN Genuine Outside Mirror Cover (Part No. 96312-6A01H)
Note: Additional tools or fasteners required for installation are not included and must be acquired separately.
5. Instalacja (konfiguracja)
This section provides general guidelines for installing an outside mirror cover. Specific steps may vary depending on your vehicle's configuration. Professional installation is recommended.
- Przygotowanie: Park the vehicle on a level surface, turn off the engine, and engage the parking brake.
- Access the Mirror: Depending on your vehicle model, you may need to gently pry off the existing mirror cover or remove a few screws to access the mounting points. Refer to your vehicle's service manual for precise instructions.
- Usuń starą okładkę: Carefully detach the old mirror cover. Be mindful of any clips or tabs that secure it. Avoid excessive force to prevent damage to the mirror assembly.
- Zamontuj nową okładkę: Align the new NISSAN Genuine Outside Mirror Cover with the mirror housing. Ensure all clips and tabs are correctly positioned. Gently press the cover into place until it snaps securely.
- Sprawdź dopasowanie: Check that the new cover is firmly attached and sits flush with the mirror assembly.
If you encounter any difficulties or resistance during installation, do not force the part. Re-check the compatibility and alignment, or consult a professional.
6. Działanie
The NISSAN Genuine Outside Mirror Cover is a passive component and does not require any operational procedures. Once correctly installed, it functions as a protective and aesthetic part of your vehicle's side mirror assembly.
7. Konserwacja
To maintain the appearance and longevity of your mirror cover:
- Clean the mirror cover regularly with mild automotive soap and water.
- Unikaj stosowania ściernych środków czyszczących lub ostrych środków chemicznych, które mogłyby uszkodzić wykończenie.
- Inspect the cover periodically for any signs of damage or loose fitment.
8. Rozwiązywanie Problemów
If you encounter issues with your NISSAN Genuine Outside Mirror Cover:
- Słabe dopasowanie: Double-check the part number against your vehicle's specifications. Ensure all clips and mounting points are correctly aligned and engaged.
- Szkoda: If the cover arrives damaged or becomes damaged during installation, contact your supplier or the manufacturer for assistance.
For persistent issues, it is advisable to consult a professional automotive technician.
9. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Producent | NISSAN |
| Marka | NISSAN |
| Numer modelu produktu | 96312-6A01H |
| Genuine Part Number | 96312-6A01H |
| Compatible Vehicle Size | Dayz, Dayz Roox |
| Pozycja instalacji | Prawo, Lewo |
| Typ soczewki lustrzanej | Wypukły |
| Waga produktu | 300 gramów |
| Wymiary opakowania | Wymiary 20 x 20 x 20 cm |
10. Gwarancja i wsparcie
For information regarding the warranty of this NISSAN Genuine part, please contact the manufacturer directly. It is important to note that for high-value items, returns or cancellations may not be possible. Please confirm the part number and compatibility before placing your order.
For technical support or further inquiries, please refer to the official NISSAN support channels or consult your authorized NISSAN dealer.





