Keyless2Go Replacement Remote Flip Key Fob

Wstęp

This manual provides detailed instructions for the Keyless2Go Replacement 4-Button Remote Flip Key Fob. It covers product compatibility, programming procedures, operational guidelines, and maintenance tips to ensure proper functionality and longevity of your key fob. This product is designed to function as a direct replacement for specific Mazda vehicle models.

Produkt ponadview

Przód view of the Keyless2Go 4-button remote flip key fob, showing the lock, unlock, trunk, and panic buttons, with the key blade extended.

Z powrotem view of the Keyless2Go 4-button remote flip key fob, displaying the smooth black casing and a small screw for assembly.

The Keyless2Go replacement remote flip key fob is a complete unit including the transponder chip and battery. It features four buttons for remote functions: Lock, Unlock, Trunk Release (car icon with HOLD), and Panic Alarm (exclamation mark with HOLD). The integrated key blade can be cut to match your vehicle's ignition.

Zgodność

This replacement key fob is compatible with specific Mazda vehicles WITHOUT SMART ENTRY SYSTEM (push-button ignition). Please verify your vehicle's compatibility and original key fob's FCC ID before proceeding.

Kompatybilne modele pojazdów:

• 2010-2013 Mazda 3 (WITHOUT SMART ENTRY SYSTEM)
• 2009-2013 Mazda 6 (WITHOUT SMART ENTRY SYSTEM)
• 2006-2015 Mazda MX-5 Miata (WITHOUT SMART ENTRY SYSTEM)

FCC ID Verification:

It is crucial that your original remote has the FCC ID: BGBX1T478SKE125-01. If the FCC ID does not match, this flip key will not work with your vehicle. The FCC ID is typically located on the top portion of the remote after removing the flip key blade.

Illustration demonstrating the process of locating the FCC ID number on the key fob. The key blade must be removed to reveal the FCC ID on the remote's top surface.

If you do not have your original flip key to verify this information, contact your local dealership with your Vehicle Identification Number (VIN) and request the correct part number.

Konfiguracja i programowanie

This replacement remote flip key requires both key blade cutting and electronic programming to function with your vehicle.

Cięcie ostrza klucza:

The uncut key blade must be cut by a qualified locksmith or dealership to match your vehicle's ignition and door locks. This process cannot be performed at home.

Programowanie zdalne:

Programming instructions will be provided with your order. There are two primary methods for programming:

1. DIY Programming (Remote Portion): This method requires at least one working key that starts the vehicle to self-program the remote functions (lock, unlock, trunk, panic).
2. DIY Programming (Key Portion/Immobilizer): To self-program the transponder chip (which allows the car to start), two working original keys are typically required.
3. Programowanie profesjonalne: If you do not have the required number of working original keys for DIY programming, or if you encounter difficulties, the key fob will need to be programmed by an automotive locksmith or a dealership.

Ważna uwaga: This key fob is NOT ABLE TO BE CLONED. Attempting to clone may result in malfunction.

Instrukcja obsługi

Once properly cut and programmed, your Keyless2Go remote flip key fob will operate your vehicle's keyless entry system and ignition.

• Przycisk blokady: Naciśnij raz, aby zablokować wszystkie drzwi pojazdu.
• Przycisk odblokowania: Press once to unlock the driver's door, press twice to unlock all doors.
• Trunk Release Button (Car icon with HOLD): Press and hold to open the vehicle's trunk or liftgate.
• Panic Alarm Button (Exclamation mark with HOLD): Press and hold to activate the vehicle's panic alarm. Press again to deactivate.
• Key Blade: Insert into the ignition to start the vehicle or into the door lock cylinder for manual entry.

Konserwacja

The Keyless2Go remote flip key fob comes with a pre-installed Lithium Metal battery. While designed for durability, proper care will extend its lifespan.

• Avoid exposing the key fob to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Do not drop the key fob or subject it to strong impacts.
• Czyść zewnętrzną część miękką, suchą ściereczką. Unikaj stosowania silnych środków chemicznych i materiałów ściernych.
• If the remote range decreases significantly, the battery may be weakening. Consult a professional for battery replacement if necessary, as improper handling can damage the internal components.

Rozwiązywanie problemów

If you experience issues with your Keyless2Go remote flip key fob, consider the following common problems and solutions:

• Key Fob Does Not Work After Programming:
  • Verify that your vehicle does not have a Smart Entry System (push-button ignition), as this key fob is not compatible with such systems.
  • Double-check that the FCC ID on your original remote matches BGBX1T478SKE125-01. An incorrect FCC ID will prevent functionality.
  • Ensure all programming steps were followed precisely. If DIY programming failed, professional programming by a locksmith or dealership may be required.
  • Confirm that the transponder chip is correctly programmed to allow the vehicle to start.
• Zmniejszony zasięg pilota: This may indicate a low battery. While the battery is included, its lifespan can vary.
• Key Fob Buttons Unresponsive: Ensure the key fob has not been exposed to water or physical damage.

For further assistance, Keyless2Go offers free technical support with every order. Please refer to the contact information provided with your purchase.

Specyfikacje

Gwarancja i wsparcie

Keyless2Go provides free technical support with every order to assist with any questions or issues you may encounter during the setup or use of your replacement key fob.

Zastrzeżenie prawne:

All product names, brands, logos, and other trademarks mentioned within this manual are the property of their respective owners. These are used solely to simplify the identification of the proper parts for a particular vehicle. Keyless2Go is not affiliated with, endorsed by, or sponsored by any of the companies or trademarks referenced herein.