1. Wprowadzenie
This manual provides essential information for the safe and efficient use of your Philips LED Dimmable A19 Frosted Light Bulb. Please read these instructions carefully before installation and operation. This bulb is designed to provide 800 lumens of soft white, dimmable light, equivalent to a 60-watt incandescent bulb, while consuming significantly less energy.
2. Główne cechy
- Energooszczędny: Uses 80% less energy than traditional 60-watt incandescent bulbs. This product is mercury-free and Energy Star Certified.
- Długotrwały: Engineered for durability, these bulbs offer a lifespan of up to 25,000 hours, which translates to approximately 10 years based on an average use of three hours per day.
- Miękkie białe światło: Delivers a comfortable 2700 Kelvin color temperature with a high Color Rendering Index (CRI) for accurate color perception.
- Płynne przyciemnianie: Features flicker-free and silent dimming capabilities, compatible with a wide range of dimmer switches. The light smoothly dims from 2700K to a warmer 2200K glow.
- Standardowa kompatybilność: Designed to fit standard E26 medium screw base fixtures, making them suitable for various applications.
- Komfort oczu: Philips LED products meet stringent test criteria for flicker, strobe, glare, and color rendition to ensure visual comfort.
3. Instalacja
- Bezpieczeństwo przede wszystkim: Before beginning installation, ensure the power supply to the light fixture is completely turned off at the circuit breaker to prevent electrical shock.
- Rozpakować: Carefully remove the Philips LED Dimmable A19 Frosted Light Bulb from its packaging.
- Wkręcać: Gently screw the bulb clockwise into a standard E26 medium screw base fixture. Tighten until snug, but do not overtighten, as this can damage the bulb or fixture.
- Przywróć zasilanie: Po prawidłowym zamontowaniu żarówki należy przywrócić zasilanie oprawy za pomocą wyłącznika automatycznego.
- Test: Włącz światło, aby sprawdzić, czy żarówka działa prawidłowo.
4. Działanie
4.1. Włączanie/wyłączanie
Operate the light bulb using your existing standard wall switch. The bulb will illuminate instantly upon activation.
4.2. Funkcja ściemniania
This Philips LED bulb is designed for smooth and consistent dimming. If your light fixture is connected to a compatible dimmer switch, you can adjust the dimmer control to achieve your desired brightness level. As the bulb is dimmed, its color temperature will gradually shift to a warmer tone, reaching approximately 2200 Kelvin at its lowest setting, similar to traditional incandescent bulbs.
Ważna uwaga:
- For optimal dimming performance and to avoid issues such as flickering or buzzing, it is recommended to use this bulb with LED-compatible dimmer switches.
- This Philips LED Dimmable A19 Frosted Light Bulb is for non-connected use only and is niekompatybilny with Philips HUE smart lighting products.
5. Konserwacja
5.1. Czyszczenie
To clean the light bulb, first ensure the power to the fixture is off and the bulb has cooled completely. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaning agents, abrasive cleaners, or solvents, as these can damage the bulb's finish or internal components.
5.2. Wymiana
Given its extended lifespan, frequent replacement of your Philips LED bulb is not typically required. When replacement becomes necessary, ensure the power is off and the bulb is cool before carefully unscrewing it from the fixture. Replace with a new, compatible LED bulb following the installation steps outlined in Section 3.
6. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Żarówka się nie świeci | Brak zasilania urządzenia | Check the circuit breaker and ensure the light switch is in the 'on' position. |
| Bulb not screwed in properly | Upewnij się, że żarówka jest dobrze wkręcona w oprawkę. | |
| Żarówka jest uszkodzona | Wymień żarówkę na nową. | |
| Flickering or inconsistent dimming | Niekompatybilny przełącznik ściemniacza | Replace your dimmer switch with one specifically designed for LED bulbs. |
| Luźne połączenie | Upewnij się, że żarówka jest dobrze wkręcona w oprawkę. | |
| Light appears too cool or blue | Incorrect bulb type or expectation | This bulb provides a soft white (2700K) light, which warms to 2200K when dimmed. If a cooler light is desired, a different color temperature bulb is required. |
7. Specyfikacje techniczne
| Marka | Philips |
| Nazwa modelu | Philips 461228 |
| Typ światła | PROWADZONY |
| Kształt żarówki Rozmiar | A19 |
| Podstawa żarówki | E26 Średni gwint |
| Cotage | 9.5 watów |
| Odpowiednik żarowy | 60 watów |
| Jasność | 800 lumenów |
| Temperatura barwowa | 2700 kelwinów (ściemnia się do 2200 kelwinów) |
| Kolor światła | Soft White / Warm White |
| Możliwość ściemniania | Tak |
| Tomtage | 120 wolty |
| Częstotliwość | 60 herców |
| Średnie życie | 25,000 godzin |
| Wskaźnik oddawania barw (CRI) | 80 |
| Zastosowanie wewnątrz/na zewnątrz | Wnętrz |
| Wymiary produktu | 4.32 x 2.42 x 2.42 cala |
| Waga przedmiotu | 1.01 funta |
8. Gwarancja i wsparcie
8.1. Informacje o gwarancji
This Philips LED Dimmable A19 Frosted Light Bulb is backed by a 10-year warranty. For complete details regarding warranty terms, conditions, and limitations, please refer to the official Philips webodwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta.
8.2. Obsługa klienta
For any further questions, technical assistance, or to initiate a warranty claim, please visit the official Philips support webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Dane kontaktowe zazwyczaj znajdują się na opakowaniu produktu lub na marce Philips. webstrona.
9. Pomoce wizualne
9.1. Philips EyeComfort: Comfortable Lighting
This video from Signify North America Corporation (Philips' parent company) explains the Philips EyeComfort criteria. It highlights how Philips LED lights are designed to be easy on the eyes by minimizing flicker, glare, and ensuring accurate color rendering. The video also demonstrates concepts of tunability and the absence of stroboscopic effects, contributing to overall visual comfort.