Instrukcja obsługi pieca hydro na pellet Ravelli HRB 160 Hydro o mocy 20 kW z wentylacją

1. Wprowadzenie

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Ravelli HRB 160 Hydro 20 kW Ventilated Pellet Hydro-Stove. Please read this manual thoroughly before installing or operating the appliance. Retain this manual for future reference.

The Ravelli HRB 160 Hydro is a sophisticated heating appliance designed to provide efficient heating through a water-based system, while also offering supplementary room ventilation. It utilizes wood pellets as fuel, offering an environmentally conscious heating solution.

2. Informacje dotyczące bezpieczeństwa

• Profesjonalna instalacja: Installation must be performed by qualified personnel in accordance with local and national regulations.
• Typ paliwa: Use only high-quality wood pellets as specified by the manufacturer. Do not use other fuels.
• Wentylacja: Należy zapewnić odpowiednią wentylację w miejscu instalacji.
• Odprawy: Maintain specified clearances from combustible materials. Refer to the installation diagram for exact distances.
• Gorące powierzchnie: The stove surfaces, especially the glass and metal parts, become very hot during operation. Avoid contact to prevent burns. Keep children and pets away.
• Konserwacja: Regular cleaning and maintenance are crucial for safe and efficient operation. Disconnect power before performing any maintenance.
• Wyłączenie awaryjne: Zapoznaj się z procedurą bezpiecznego wyłączenia pieca w razie awarii.

3. Konfiguracja

3.1 Rozpakowanie i kontrola

Ostrożnie rozpakuj piecyk i sprawdź, czy nie uległ uszkodzeniu podczas transportu. Wszelkie uszkodzenia należy natychmiast zgłosić dostawcy. Upewnij się, że wszystkie elementy wymienione w liście przewozowym są obecne.

3.2 Umieszczenie

The stove must be placed on a non-combustible floor or on a suitable protective hearth. Ensure the chosen location allows for proper flue connection, access for maintenance, and sufficient air circulation.

3.3 Podłączenie spalin

Connect the stove to a dedicated and properly sized flue system. All connections must be sealed to prevent leakage of flue gases. Consult a qualified technician for flue system design and installation.

3.4 Hydraulic Connections (Hydro System)

Connect the stove to your central heating system's water circuit. This involves connecting the flow and return pipes. Ensure all connections are watertight and that the system is properly filled and bled of air. An expansion vessel, safety valve, and pressure gauge must be installed as per local regulations.

3.5 Podłączenie elektryczne

Connect the stove to a grounded electrical outlet. The electrical supply must match the specifications provided on the appliance's rating plate. It is recommended to install a dedicated circuit breaker for the stove.

3.6 Załadunek peletu

Open the pellet hopper lid and carefully pour wood pellets into the hopper. Ensure no foreign objects enter the hopper. Do not overfill.

Image 1: The Ravelli HRB 160 Hydro 20 kW Ventilated Pellet Hydro-Stove, illustrating its design with the internal pellet feeding mechanism visible on the left and the modern front panel with a glass door on the right. This view highlights the compact structure and the integration of the combustion chamber with the water heating components.

4. Instrukcja obsługi

4.1 Panel sterowania ponadview

The control panel typically features a display, power button, temperature adjustment buttons, and mode selection buttons. Refer to the detailed diagram in your specific model's manual for exact button functions.

4.2 Pierwsze uruchomienie

1. Ensure the pellet hopper is filled and all connections (flue, hydraulic, electrical) are secure.
2. Press the power button to turn on the stove.
3. The stove will initiate an ignition sequence, which includes pre-heating the igniter and feeding pellets into the burner pot.
4. Once ignited, the stove will enter its operating phase.

4.3 Regulacja temperatury i mocy

Use the temperature adjustment buttons on the control panel to set the desired water temperature for your heating system. The stove will automatically modulate its pellet feed and fan speed to maintain this temperature. Some models also allow direct adjustment of the power level.

4.4 Sterowanie wentylacją

The HRB 160 Hydro includes a ventilation feature. Use the dedicated controls on the panel to adjust the fan speed for room air distribution, if applicable. This function can often be operated independently or in conjunction with the heating cycle.

4.5 Wyłączanie pieca

Press the power button to initiate the shutdown sequence. The stove will stop feeding pellets and run the fans to cool down before completely turning off. Do not unplug the stove during the cooling cycle.

5. Konserwacja

Regular maintenance is essential for the longevity and efficient operation of your pellet hydro-stove. Always ensure the stove is cool and disconnected from the power supply before performing any maintenance.

5.1 Codzienna konserwacja

• Usuwanie popiołu: Empty the ash pan daily or as needed. Use a vacuum cleaner designed for ash.
• Burner Pot Cleaning: Clean the burner pot (brazier) to remove any clinker or unburnt pellets. Ensure all air holes are clear.
• Czyszczenie szkła: Clean the inside of the glass door with a suitable glass cleaner for stoves when cool.

5.2 Konserwacja tygodniowa/miesięczna

• Czyszczenie wymiennika ciepła: Clean the heat exchanger tubes using the provided tool or a brush to remove soot and ash buildup.
• Kontrola zbiornika: Inspect the pellet hopper for any dust or debris.
• Ogólne sprzątanie: Clean the exterior surfaces of the stove.

5.3 Roczna usługa profesjonalna

It is highly recommended to have your Ravelli HRB 160 Hydro serviced annually by a qualified technician. This service typically includes:

• Thorough cleaning of the flue system and internal components.
• Inspection of all electrical and hydraulic connections.
• Checking and replacing worn parts if necessary.
• Combustion analysis and optimization.

6. Rozwiązywanie Problemów

This section addresses common issues you might encounter. For complex problems or error codes not listed, contact a qualified service technician.

6.1 Stove Does Not Ignite

• Check Pellet Level: Ensure the hopper has sufficient pellets.
• Check Burner Pot: Ensure the burner pot is clean and free of obstructions.
• Igniter Failure: If the igniter is not glowing, it may need replacement by a technician.

6.2 Low Heat Output

• Jakość pelletu: Ensure you are using high-quality pellets.
• Wymiennik ciepła: Clean the heat exchanger thoroughly.
• Ciśnienie systemowe: Check the hydraulic system pressure.
• Ustawienia: Verify the power and temperature settings on the control panel.

6.3 Excessive Smoke or Soot

• System kominowy: Inspect the flue for blockages or leaks.
• Wlot powietrza: Ensure the air intake is not obstructed.
• Jakość pelletu: Poor quality pellets can cause excessive soot.

7. Specyfikacje

• Model: Ravelli HRB 160 Hydro
• Moc wyjściowa: 20 kW
• Typ paliwa: Pellet drzewny
• Waga: Około 60 kg
• Material (Front Panel/Door): Szkło
• ASIN: B01C2W8OVK

8. Gwarancja i wsparcie

Your Ravelli HRB 160 Hydro 20 kW Ventilated Pellet Hydro-Stove is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including duration and coverage details. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or warranty service, please contact your authorized Ravelli dealer or the customer service department. Ensure you have your model number and serial number available when contacting support.