Wstęp
This manual provides essential information for the safe and proper installation, operation, and maintenance of the Hubbell 7410-B 20 Amp, 4-Pole, 120-208V, 4-Wire, Non-Grounding Receptacle. Please read all instructions carefully before proceeding with installation or use. Retain this manual for future reference.
Informacje dotyczące bezpieczeństwa
WARNING: Risk of electric shock or fire. Installation and servicing must be performed by qualified personnel only. Disconnect power at the circuit breaker or fuse box before installing or servicing.
- Zawsze należy przestrzegać lokalnych i krajowych przepisów dotyczących instalacji elektrycznych.
- Ensure the power supply matches the receptacle's voltagi i ampoceny erage.
- Nie używaj tego pojemnika, jeśli wydaje się uszkodzony.
- This is a non-grounding type receptacle. Ensure its application is appropriate for systems not requiring a ground connection.
Konfiguracja i instalacja
Installation of this electrical receptacle requires knowledge of electrical systems. If you are not a qualified electrician, do not attempt installation. Consult a licensed professional.
- Odłączenie zasilania: Turn off power to the circuit at the main service panel (circuit breaker or fuse box) before beginning any work. Verify power is off using a voltagtester.
- Montowanie: Securely mount the receptacle to a suitable electrical box or surface using appropriate fasteners. Ensure the mounting surface is stable and free from obstructions.
- Połączenia elektryczne:
- Identify the four wires from the power supply.
- Connect each wire to the corresponding terminal on the receptacle. Refer to the wiring diagram provided with the product packaging for specific terminal assignments. Ensure all connections are tight and secure.
- This is a 4-wire, non-grounding receptacle. Do not attempt to create a ground connection if the system is designed as non-grounding.
- Montaż końcowy: Once wiring is complete and secure, carefully position the receptacle into the electrical box and attach any cover plates.
- Przywrócenie zasilania: Restore power at the main service panel. Test the receptacle with a compatible device to ensure proper function.
Instrukcja obsługi
The Hubbell 7410-B receptacle is designed for connecting compatible electrical devices requiring 20 Amps, 4-Pole, 120-208V, 4-Wire, Non-Grounding power. To operate:
- Ensure the device to be connected is compatible with the receptacle's voltage, amperage, and pole configuration.
- Align the plug of the device with the receptacle and insert firmly.
- To disconnect, grasp the plug and pull it straight out from the receptacle. Do not pull by the cord.
Konserwacja
Regular maintenance helps ensure the longevity and safe operation of your Hubbell receptacle.
- Czyszczenie: Periodically clean the exterior of the receptacle with a dry, soft cloth. Do not use liquid cleaners or solvents, as they may damage the unit or pose an electrical hazard. Ensure power is off before cleaning.
- Kontrola: Annually inspect the receptacle for any signs of wear, damage, discoloration, or loose connections. If any issues are observed, disconnect power and have the unit inspected and repaired or replaced by a qualified electrician.
- Szczelność: Ensure all mounting screws and terminal connections remain tight. Loose connections can lead to overheating and potential hazards.
Rozwiązywanie problemów
If you experience issues with your Hubbell 7410-B receptacle, consider the following common troubleshooting steps. Always disconnect power before inspecting the unit.
- Brak zasilania urządzenia:
- Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped or blown.
- Verify that the device plugged into the receptacle is functioning correctly by testing it in another known working outlet.
- Inspect the receptacle for loose wiring connections (with power off).
- Przegrzanie:
- If the receptacle feels warm to the touch, immediately disconnect power and unplug any devices.
- Overheating can indicate an overload, loose connection, or internal fault. Consult a qualified electrician.
For issues not resolved by these steps, contact a qualified electrician or Hubbell customer support.
Specyfikacje
| Model | 7410-B |
| Marka | Dzwonek |
| Ampwymazać | 20 Amps |
| Tomtage Ocena | 120-208 V |
| Polacy | 4-biegunowe |
| Przewody | 4-żyłowy |
| Typ uziemienia | Nieuziemiony |
| Typ złącza | Wtyczka |
| Tworzywo | Porcelana |
| Wymiary produktu | 5.91 x 5.91 x 5.91 cala |
| Waga | 3.68 uncji |
Informacje o gwarancji
Hubbell products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to the 7410-B receptacle, please refer to the official warranty statement provided with your purchase or visit the official Hubbell webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.
Wsparcie
For technical assistance, product inquiries, or to locate a service center, please contact Hubbell customer support through their official webstronę internetową lub dane kontaktowe znajdujące się na opakowaniu produktu.
Hubbell Official Webstrona: www.hubbell.com
