Instrukcja obsługi zestawu Skytech AF-LMF/R do zdalnego sterowania zaworem gazowym do kominka

1. Wprowadzenie

The Skytech AF-LMF/R gas valve kit provides safe and user-friendly control for gas heating appliances. This safety pilot kit is designed for use with 18 to 30-inch natural gas (NG) vented log sets. It features a manual On/Off gas valve with a solenoid and an On/Off remote control function. An optional LP conversion kit is available and sold separately.

2. Ważne informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Installation and service must be performed by a qualified installer, service agency, or gas supplier. Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Read all instructions thoroughly before installing or servicing this product.

• Always turn off the gas supply to the appliance before any service.
• Sprawdź, czy wszystkie połączenia są szczelne i szczelne.
• Do not operate the appliance if any part has been submerged in water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control that has been submerged in water.
• Utrzymuj obszar wokół urządzenia w czystości i nie dopuszczaj do obecności materiałów łatwopalnych, benzyny i innych łatwopalnych oparów i cieczy.

3. Zawartość opakowania

Przed przystąpieniem do instalacji sprawdź, czy wszystkie komponenty są obecne i nieuszkodzone.

• Millivolt Safety Pilot Kit with Remote Receiver
• Manual On/Off Gas Valve with Solenoid
• On/Off Remote Control Transmitter
• Quick Mount Pilot Assembly with 30-millivolt Thermocouple
• Dampe Clamp
• Flexible Gas Line and all necessary Connectors for Main Burner and Pilot
• 2 baterie AAA (do pilota)

Rysunek 3.1: Koniecview of the Skytech AF-LMF/R kit components, including the gas valve, remote receiver, remote control, pilot assembly, and flexible lines.

Figure 3.2: The Skytech AF-LMF/R kit featuring the remote control and receiver box alongside the main gas valve assembly.

Figure 3.3: Various components of the Skytech AF-LMF/R kit, including the gas valve, pilot assembly, flexible lines, remote receiver, and remote control.

4. Konfiguracja i instalacja

4.1 Determine Fireplace Remote Readiness

Before installing the Skytech AF-LMF/R kit, it is crucial to determine if your fireplace is compatible with a remote control system. Look for a switch on the wall, inside the fireplace behind a louver, or on a decorative trim. If a switch is present, your fireplace is likely ready. Alternatively, locate the gas valve and check for terminals marked 'TH', 'TP', or 'TPTH'. The presence of these terminals indicates remote readiness.

4.2 Gas Valve Installation

The AF-LMF/R kit includes a 225-degree rated valve with an exclusive safety seal. Ensure proper connection of the pilot assembly, dampeee klamp, valve, solenoid, and flexible lines to the main burner and pilot. Refer to the detailed instructions provided with the kit for specific plumbing and wiring diagrams. It is highly recommended that a qualified technician performs this installation.

4.3 Remote Receiver and Wiring

Connect the remote receiver to the gas valve terminals. The receiver typically has two wires that connect to the 'TH' and 'TP' terminals on the gas valve. Ensure these connections are secure. The remote receiver requires batteries for operation, or it can be powered by an optional AC adapter.

5. Instrukcja obsługi

5.1 Obsługa ręczna

The gas valve features a manual On/Off control. To operate the fireplace manually, turn the knob on the gas valve to the 'ON' or 'OFF' position as desired. Ensure the pilot light is lit before attempting to turn on the main burner.

5.2 Obsługa pilota zdalnego sterowania

The remote control allows you to turn the fireplace On or Off from a distance. Insert the 2 AAA batteries into the remote control transmitter. Point the remote control towards the fireplace and press the 'ON' or 'OFF' button to activate or deactivate the main burner. The remote control operates on radio frequencies (RF) and does not offer flame modulation or display features for this specific model.

6. Konserwacja

6.1 Wymiana baterii

The remote control transmitter requires 2 AAA batteries. Replace batteries when the remote control's performance diminishes or the display (if applicable to other models) becomes dim. Ensure correct polarity when inserting new batteries.

6.2 Ogólna opieka

Keep the remote control and receiver free from dust and moisture. Do not expose to extreme temperatures. Periodically inspect all gas connections for leaks and ensure the pilot assembly is clean and functioning correctly.

7. Rozwiązywanie Problemów

• Fireplace does not turn on with remote: Check remote control batteries. Ensure the remote receiver is properly connected and its batteries (if applicable) are fresh. Verify the gas supply is on and the pilot light is lit.
• Pilot light does not stay lit: This could indicate an issue with the thermocouple or thermopile. Consult a qualified service technician.
• Remote control range is limited: Replace remote batteries. Ensure no obstructions are blocking the signal between the remote and receiver.
• Zapach gazu: Immediately turn off the gas supply to the appliance. Do not operate any electrical switches. Evacuate the area and call your gas supplier or fire department.

8. Specyfikacje

9. Informacje o gwarancji

Please refer to the manufacturer's official warranty documentation included with your product for detailed terms and conditions. Warranty coverage typically includes defects in materials and workmanship under normal use. Keep your proof of purchase for warranty claims.

10. Wsparcie techniczne

If you encounter any issues or have questions regarding your Skytech AF-LMF/R kit, please contact Skytech Technical Support for assistance.

Telefon pomocy technicznej: 855-498-8324

Godziny otwarcia: Monday - Friday, 8 AM - 5 PM Eastern Standard Time