ICO ICOC1605T

ICO CO2 16g Threaded Cartridges Instruction Manual

Model: ICOC1605T

Wstęp

This manual provides essential information for the safe and effective use of ICO CO2 16g Threaded Cartridges. These cartridges are designed for various applications, including inflating bicycle tires and dispensing food-grade beverages.

Ważne informacje dotyczące bezpieczeństwa

  • CO2 cartridges contain compressed gas. Handle with care.
  • Do not expose cartridges to heat above 120°F (49°C) or direct sunlight.
  • Do not puncture, incinerate, or store in confined spaces.
  • Przechowywać w miejscu niedostępnym dla dzieci.
  • Each cartridge is for single-use only.
  • Always use a protective sleeve or glove when handling cartridges during discharge, as they can become very cold.
  • Ensure proper ventilation when using.

Konfiguracja i instalacja

These ICO 16g threaded CO2 cartridges are designed for use with compatible CO2 inflators and dispensers that feature a 3/8"-24 TPI threaded connection.

For Bike Tire Inflation:

  1. Ensure your CO2 inflator's air nozzle is closed before installation.
  2. Place the CO2 cartridge into a protective insulating sleeve to prevent frostbite during use.
  3. Screw the threaded end of the cartridge firmly into the inflator head until it is securely seated and the cartridge is pierced.
  4. Attach the inflator head to your bicycle tire valve (compatible with Presta and Schrader valves).
  5. Slowly open the inflator's valve or press the trigger to release CO2 into the tire.
  6. Inflate to the desired pressure (e.g., road tires to 100 psi, MTB tires to approximately 40 psi).
  7. Once inflated, close the inflator valve and remove it from the tire. Unscrew the empty cartridge from the inflator.

Video: Demonstrates the function and usage method of CO2 cartridges for tire inflation.

Person inflating a bicycle tire with a CO2 cartridge and inflator.

Image: A CO2 inflator attached to a bicycle tire valve, demonstrating quick inflation.

Close-up of a CO2 bike tire inflator with a cartridge attached.

Obraz: szczegółowy view of a CO2 bike tire inflator.

Instrukcja obsługi

Bicycle Tire Inflation:

These 16g CO2 cartridges provide rapid inflation for bicycle tires. A single cartridge can inflate a road tire to approximately 100 psi or a mountain bike tire to about 40 psi. Always refer to your tire's recommended pressure.

Video: Shows the process of inflating bike tires using 16g threaded CO2 cartridges.

Food and Beverage Dispensing:

ICO CO2 cartridges are food-grade and suitable for use with compatible kitchen and brewing devices, such as pressurized beer mini kegs and growler tap systems. They contain pure CO2 gas with no oils or additives, ensuring no impact on taste.

Beer being dispensed from a mini keg using a CO2 cartridge, highlighting food-safe use.

Image: A mini keg dispensing beer, illustrating the food-grade application of CO2 cartridges.

Inne zastosowania:

These cartridges are compatible with any CO2-powered tool designed for standard 16g threaded CO2 cartridges.

Pielęgnacja i konserwacja

  • Store unused cartridges in a cool, dry place away from direct sunlight and heat sources.
  • Empty cartridges are made of 100% recyclable steel. Dispose of them according to local recycling guidelines.
  • Keep the threads of your inflator clean and free from debris to ensure a proper seal.

Rozwiązywanie problemów

Issue: Cartridge does not pierce or gas does not release.

Rozwiązanie: Ensure the cartridge is fully and firmly screwed into the inflator head. Check that the inflator's valve mechanism is functioning correctly and is not obstructed. Some inflators require a quick, firm twist to pierce the cartridge.

Issue: Gas leaks during inflation.

Rozwiązanie: Verify that the cartridge is tightly screwed into the inflator and that the inflator head is securely attached to the tire valve. Inspect the rubber seals (O-rings) on your inflator for any damage or wear. Replace if necessary.

Issue: Tire does not inflate to desired pressure.

Rozwiązanie: A single 16g cartridge has a finite capacity. For larger tires or higher pressures, multiple cartridges may be required, or the tire may have a leak. Check for punctures in the tire or tube.

Specyfikacja produktu

FunkcjaSzczegół
MarkaICO
Numer modeluICOC1605T
TworzywoStal stopowa
Waga produktu (na wkład)16 gramów (ok. 0.564 uncji)
Product Dimensions (per cartridge)Approx. 3.5" (89mm) long, 5/6" (21mm) diameter
Neck Length11mm
Średnica szyjki7mm
Typ wątku3/8"-24 TPI
Maximum Pressure (Road Tire)100 psi
Maximum Pressure (MTB Tire)40 psi
Typ gazu100% Carbon Dioxide (CO2)
Jakość spożywczaTak
A hand holding a CO2 cartridge, with detailed dimensions and thread type shown.

Image: Illustrates the threaded end and dimensions of the CO2 cartridge.

Gwarancja i wsparcie

Informacje o gwarancji:

ICO guarantees the quality of its CO2 cartridges for two years from the date of purchase.

Obsługa klienta:

Aby uzyskać dalszą pomoc lub pytania, odwiedź stronę ICO Store on Amazon lub skontaktuj się bezpośrednio z producentem.

Powiązane dokumenty - ICOC1605T

Przedview ICO Professional Whipped Cream Dispenser Manual
Comprehensive user manual for the ICO Professional Whipped Cream Dispenser, covering safety instructions, usage, cleaning, troubleshooting, and spare parts. Learn how to make whipped creams, desserts, sauces, and more.
Przedview Instrukcja obsługi metalowej spiralizerki i krajalnicy do warzyw ICO
Instrukcja obsługi spiralizatora do metalu i krajalnicy do warzyw ICO. Znajdź instrukcję i dane kontaktowe do działu handlu ICO.
Przedview Wieszak na ręczniki ICO Vapor 18": dane techniczne i wykończenia
Odkryj wieszak na ręczniki ICO Vapor 18" – wysokiej jakości dodatek do łazienki. W tym dokumencie znajdziesz specyfikacje techniczne, dostępne wykończenia, w tym chrom, szczotkowany nikiel, matowa czerń, polerowany nikiel, szczotkowane złoto PVD i szczotkowany brąz PVD, wymiary, materiały oraz instrukcje dotyczące pielęgnacji. Dowiedz się więcej o zasadach gwarancji ICO dla zastosowań domowych i komercyjnych.
Przedview Instrukcja instalacji lustra LED ICO Atlas
Kompleksowa instrukcja instalacji lustra LED ICO Atlas, obejmująca informacje na temat bezpieczeństwa, narzędzi, części, wymiarów, połączeń elektrycznych i instrukcji obsługi modeli IA1024, IA1030 i IA1036.
Przedview Elektryczny podgrzewacz ręczników Savoy z przewodem | ICO – Dane techniczne
Szczegółowe specyfikacje techniczne elektrycznego podgrzewacza do ręczników ICO Savoy (modele W1011, W1013, W1015), obejmujące funkcje, wymiary, montaż, gwarancję i instrukcje dotyczące pielęgnacji.
Przedview Specyfikacja techniczna elektrycznego podgrzewacza do ręczników Rosendal - ICO Bath
Szczegółowe dane techniczne, funkcje, instrukcja instalacji i informacje o gwarancji elektrycznego podgrzewacza do ręczników ICO Rosendal (modele E8203-E8209). Zawiera wymiary, wykończenia i instrukcje dotyczące pielęgnacji.