Produkt ponadview
The LulzBot Mini is a high-performance desktop 3D printer designed for ease of use. It is an Open Source Hardware product, certified by the Free Software Foundation, allowing users flexibility and access to evolving technology. This printer is known for its accuracy and speed, making it suitable for various applications.
Figure 1: LulzBot Mini 3D Printer with a sampwydruk.
Główne cechy
- Łatwość użytkowania: Features include auto-bed leveling, auto-nozzle cleaning, and an easy-carry handle.
- Kompatybilność oprogramowania: Comes standard with Cura LulzBot Edition and is compatible with OctoPrint, BotQueue, Slic3r, Printrun, MatterControl, and more.
- Print Volume: 6in x 6in x 6.2in (152mm x 152mm x 158mm).
- Rozdzielczość warstwy: Capable of resolutions from 50 micron to 500 micron, depending on part geometry and desired speed/finish.
- Możliwości temperaturowe: Hot end reaches up to 300°C (572°F) and heated bed up to 120°C (248°F), supporting a wide range of materials.
- Prędkość drukowania: Top speed of 275mm/sec (10.8 in/sec) at 0.18 mm layer height.
- Konstrukcja modułowa: Tool head carriage allows for easy swapping of different print heads for various filament materials.
- Open Source Hardware: Provides freedom to adopt new technologies and materials.
Figure 2: The LulzBot Mini 3D Printer actively printing an object.
Przewodnik po konfiguracji
The LulzBot Mini is designed for quick and easy setup. It ships fully assembled and calibrated, allowing users to begin printing shortly after unboxing.
- Rozpakowywanie: Carefully remove the printer from its packaging. Ensure all packing materials and protective elements are removed from the print bed and print head.
- Umieszczenie: Place the printer on a stable, level surface in a well-ventilated area.
- Podłączenie zasilania: Connect the power supply to the printer and plug it into a suitable electrical outlet.
- Instalacja oprogramowania: Install the recommended Cura LulzBot Edition software on your personal computer. This software is essential for preparing 3D models for printing and controlling the printer.
- Połączenie USB: Podłącz drukarkę do komputera za pomocą kabla USB.
- Ładowanie żarnika: Follow the on-screen instructions in the software or the quick start guide to load your chosen filament material into the printer's extruder.
- Pierwszy wydruk: The printer is pre-calibrated. Initiate a test print through the software to verify proper operation.
Figure 3: The LulzBot Mini 3D Printer ready for setup.
Instrukcja obsługi
Operating the LulzBot Mini involves preparing your 3D model, sending it to the printer, and monitoring the printing process.
- Model Preparation (Slicing):
- Open your 3D model (.STL, .OBJ, etc.) in Cura LulzBot Edition or another compatible slicing software.
- Adjust print settings such as layer height, infill density, print speed, and support structures as needed for your specific model and material.
- The software will "slice" the model into layers and generate G-code, which are instructions for the printer.
- Połączenie drukarki: Ensure the printer is connected to your computer via USB and powered on.
- Print Initiation:
- Load the appropriate filament into the extruder.
- Initiate the print from the slicing software. The printer will automatically perform auto-bed leveling and auto-nozzle cleaning before starting the print.
- Monitorowanie: Observe the initial layers of the print to ensure proper adhesion and extrusion. The PEI print surface is designed for low maintenance and good adhesion.
- Zakończenie drukowania: Once the print is complete, allow the print bed to cool before carefully removing the printed object.
Rysunek 4: Szczegółowy view of the print head and filament path.
Konserwacja
Regular maintenance ensures optimal performance and longevity of your LulzBot Mini 3D Printer.
- Czyszczenie dysz: Periodically clean the print nozzle to prevent clogs and ensure consistent extrusion. The auto-nozzle cleaning feature helps, but manual cleaning may be required for stubborn residue.
- Print Surface Care: The PEI print surface is low maintenance. Clean it with isopropyl alcohol before each print to ensure good adhesion. Avoid using abrasive materials that could scratch the surface.
- Smarowanie: Refer to the detailed user guide (available as a PDF document) for instructions on lubricating the printer's moving parts, such as lead screws and smooth rods, to ensure smooth operation.
- Aktualizacje oprogramowania układowego: Check the LulzBot website regularly for firmware updates. Keeping your printer's firmware up-to-date can improve performance and add new features.
- Ogólne sprzątanie: Keep the printer free of dust and filament debris. Use a soft brush or compressed air to clean hard-to-reach areas.
Rozwiązywanie problemów
This section addresses common issues you might encounter with your LulzBot Mini 3D Printer.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Wydruk nie przykleja się do łóżka | Dirty print surface, incorrect bed temperature, or nozzle too far from bed. | Clean the PEI print surface with isopropyl alcohol. Verify bed temperature settings in slicing software. Ensure auto-bed leveling is functioning correctly. |
| Extruder clicking or no filament extrusion | Clogged nozzle, tangled filament, or incorrect hot end temperature. | Perform a cold pull or use a thin needle to clear the nozzle. Check filament path for obstructions. Verify hot end temperature is appropriate for the filament type. |
| Poor print quality (stringing, layer shifting) | Incorrect print settings (retraction, speed), loose belts, or mechanical issues. | Adjust retraction settings in software. Inspect and tighten X and Y axis belts if loose. Check for any damaged or misaligned components. |
| Printer not connecting to computer | USB cable issue, driver problem, or software conflict. | Try a different USB port or cable. Reinstall printer drivers. Ensure no other software is interfering with the connection. |
| Nietypowe dźwięki podczas pracy | Loose components, worn bearings, or fan issues. | Inspect the printer for any loose screws or parts. Check the extruder fan for proper operation. If noises persist, consult the full user manual or contact support. |
Specyfikacje
| Atrybut | Szczegół |
|---|---|
| Numer modelu | KT-PR0035NA |
| Wymiary produktu | 17 x 22 x 19 cala |
| Waga przedmiotu | 22 funtów |
| Objętość wydruku | 6 cala x 6 cala x 6.2 cala (152 mm x 152 mm x 158 mm) |
| Rozdzielczość warstwy | 50 micron to 500 micron |
| Maksymalna temperatura gorącego końca | 300°C (572°F) |
| Maksymalna temperatura podgrzewanego łóżka | 120°C (248°F) |
| Top Print Speed | 275mm/sec (10.8 in/sec) at 0.18 mm layer height |
| Kompatybilne urządzenia | Komputer osobisty |
| Zgodność materiałów | Polylactic Acid (and others via modular tool head) |
| Data pierwszej dostępności | 19 stycznia 2015 r. |
| Producent | Aleph Objects Inc |
Gwarancja i wsparcie
The LulzBot Mini Desktop 3D Printer comes with a Roczna gwarancja I One-year customer support.
For any issues or questions, please refer to the official LulzBot support channels or the comprehensive User Manual (PDF) available through the product's Amazon page.
