DB Electrical 410-40028 Starter Instruction Manual

1. Wprowadzenie

This manual provides essential information for the proper installation, operation, and maintenance of your DB Electrical 410-40028 Starter. This starter is designed as a replacement for various John Deere tractor models. Please read this manual thoroughly before attempting any installation or service to ensure safety and optimal performance.

2. Informacje dotyczące bezpieczeństwa

Ostrzeżenie: Always disconnect the vehicle's battery before working on the electrical system to prevent electrical shock or damage. Wear appropriate personal protective equipment, including safety glasses and gloves. Ensure the vehicle is stable and secured to prevent accidental movement. If you are unsure about any procedure, consult a qualified technician.

Ostrzeżenie dotyczące propozycji 65: Ten produkt może narazić Cię na działanie substancji chemicznych, o których stan Kalifornia wie, że powodują raka, wady wrodzone lub inne uszkodzenia układu rozrodczego. Aby uzyskać więcej informacji, odwiedź stronę www.P65Warnings.ca.gov.

3. Koniec produktuview

The DB Electrical 410-40028 Starter (Model SPR0009) is a 12-volt, 2.5 KW starter with 10 teeth and a CW (Clockwise) rotation. It is a PLGR (Planetary Gear Reduction) type starter, engineered to meet OEM specifications for reliable performance in compatible John Deere applications.

Rysunek 3.1: Główny view of the DB Electrical 410-40028 Starter, showing the solenoid and gear assembly.

Rysunek 3.2: Strona view of the starter, highlighting the motor housing and mounting points.

4. Instalacja

Kontrola przed instalacją: Before installation, verify that this starter is the correct part for your specific John Deere model by cross-referencing the OEM numbers provided in the specifications section of this manual. Ensure the new starter matches the physical dimensions and electrical connections of the original unit.

1. Odłącz akumulator: Disconnect the negative (-) battery cable first, followed by the positive (+) battery cable.
2. Zlokalizuj i usuń stary rozrusznik: Identify the existing starter motor. Disconnect all electrical connections to the old starter. Remove the mounting bolts securing the old starter to the engine. Carefully extract the old starter.
3. Zainstaluj nowy program startowy: Position the new DB Electrical 410-40028 Starter in place. Secure it with the appropriate mounting bolts, tightening them to the manufacturer's specifications.
4. Podłącz okablowanie elektryczne: Reconnect the main battery cable and the solenoid activation wire to the new starter. Ensure all connections are clean, tight, and correctly oriented.
5. Podłącz ponownie akumulator: Reconnect the positive (+) battery cable first, then the negative (-) battery cable.
6. Funkcjonalność testu: Attempt to start the engine to confirm proper operation of the new starter.

It is highly recommended to have installation performed by a certified mechanic to ensure correct procedure and safety.

5. Działanie

The starter motor is an integral component of your vehicle's engine starting system. Its operation is initiated by turning the ignition key or pressing the start button. The starter engages the engine's flywheel, rotating the crankshaft to begin the combustion cycle. Once the engine starts, the starter disengages automatically.

6. Konserwacja

The DB Electrical 410-40028 Starter is designed for durability and requires minimal maintenance. However, regular inspection of related components can prolong its lifespan:

• Stan baterii: Ensure your vehicle's battery is always fully charged and in good condition. A weak battery can strain the starter.
• Połączenia kablowe: Periodically inspect all battery cables and starter connections for corrosion, looseness, or damage. Clean and tighten as necessary.
• Uszkodzenia fizyczne: Check the starter for any signs of physical damage or excessive wear.

There are no internal user-serviceable parts within the starter motor. Any internal issues should be addressed by a qualified professional.

7. Rozwiązywanie Problemów

• Starter Does Not Engage (No Click or Whirring Sound):
  • Check battery charge and terminals.
  • Verify all electrical connections to the starter are secure.
  • Inspect the ignition switch and starter relay for proper function.
• Slow Cranking:
  • Indicates a low battery or corroded battery cables.
  • Could also be excessive resistance in the starter circuit. Inspect all connections and battery condition.
• Grinding Noise During Start:
  • May indicate improper starter engagement with the engine's flywheel.
  • Ensure the starter is correctly mounted and the gear teeth are not damaged.
• Starter Engages but Engine Does Not Turn Over:
  • Could indicate a mechanical issue with the engine or a faulty starter drive (bendix).

If these basic troubleshooting steps do not resolve the issue, it is recommended to seek professional assistance.

8. Specyfikacje

Compatible OEM Numbers:

• ARROWHEAD: 410-40028, MS430, V438012, IS1059
• BOSCH: 0-001-223-502
• CARGO: 113478
• J&N: 410-40028
• JOHN DEERE: RE501347, RE501680, RE501693, RE502156, RE502196, RE60641, RE63010
• LESTER: 17086, 18526
• LETRIKA (ISKRA) AFTERMARKET: IS 1059
• MAHLE: MS430
• REMY LIGHT DUTY: 69600
• VALEO: D7R14, 438012

Compatible John Deere Models:

• 240 (1999-2004), 240 Series II
• 250 (1999-2004), 250 Series II
• 260 (1999-2004), 260 Series II
• 5055E, 5065E
• 5103, 5105
• 5203, 5205, 5210, 5220
• 5303, 5310, 5310N, 5320, 5320N
• 5410, 5410N
• 8875 (1994-1998)

9. Gwarancja i wsparcie

This DB Electrical product comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product will function flawlessly when installed correctly in your vehicle. In the rare event of a product malfunction within the warranty period, DB Electrical will replace the unit.

For warranty claims, technical assistance, or any inquiries regarding your DB Electrical 410-40028 Starter, please contact DB Electrical customer support through their official website or authorized retailers. Please have your purchase details and product model number (SPR0009) available when contacting support.