Wstęp
This manual provides essential information for the proper use and maintenance of your Intex Type H Filter Cartridge. Designed for Intex Filter Pumps 28601 and 28602, these cartridges are crucial for maintaining clean and clear swimming pool water. Please read these instructions carefully before installation and use.
Produkt ponadview
The Intex Type H Filter Cartridge (Model 29007E) is a replacement filter made from Dacron material, designed for efficient filtration of debris and particles from your pool water. Regular replacement ensures optimal performance of your filter pump.
Image: A pack containing twelve Intex Type H filter cartridges, ready for use.
Image: A single Intex Type H filter cartridge shown with its product packaging, highlighting its Type H designation.
Konfiguracja i instalacja
Follow these steps to install the Intex Type H Filter Cartridge into your compatible filter pump:
- Wyłączone: Ensure your filter pump is turned off and unplugged from the power source before beginning installation.
- Zamknij zawory: Close the plunger valves on your pool to prevent water from flowing out of the pump.
- Otwórz obudowę filtra: Unscrew the collar or lid of the filter pump housing.
- Wyjmij stary wkład: Carefully remove the old, used filter cartridge. Dispose of it responsibly.
- Włóż nowy wkład: Place the new Intex Type H filter cartridge into the filter housing. Ensure it is seated correctly.
- Bezpieczne zakwaterowanie: Replace the filter housing lid and tighten the collar securely. Do not overtighten.
- Open Valves & Power On: Open the plunger valves and plug in the filter pump. Turn it on to resume filtration.
Image: Hands demonstrating the process of inserting a new filter cartridge into the filter pump housing.
Image: An Intex filter pump shown alongside a Type H filter cartridge, illustrating compatibility.
Instrukcja obsługi
Once installed, the filter cartridge operates automatically with your Intex filter pump. The pump circulates pool water through the cartridge, which traps dirt and debris. For optimal water clarity, ensure your pump runs for several hours each day, as recommended by your pool's specific requirements.
Image: A close-up of clear, sparkling blue pool water, demonstrating the desired outcome of effective filtration.
Konserwacja
Regular maintenance of your filter cartridge is essential for efficient pool filtration and pump longevity.
Czyszczenie wkładu
The filter cartridge can be cleaned to extend its lifespan. Follow these steps:
- Wyłączone: Wyłącz pompę filtrującą i odłącz ją od zasilania.
- Wyjmij wkład: Open the filter housing and remove the cartridge as described in the setup section.
- Wypłukać: Use a garden hose to thoroughly rinse the pleated material of the cartridge. Spray from top to bottom, ensuring all debris is dislodged from the pleats.
- Sprawdzać: Check the cartridge for any tears or damage. If damaged, replace it.
- Zainstaluj ponownie: Reinstall the cleaned cartridge into the pump housing and secure the lid.
Image: A person cleaning an Intex Type H filter cartridge using a garden hose to remove accumulated debris.
Obraz: szczegółowy view of the pleated Dacron material that forms the filtration surface of the cartridge.
Harmonogram wymiany
For best results and to maintain optimal filtration efficiency, it is recommended to replace the filter cartridge with a new one every dwa tygodnie. Frequent replacement prevents clogging and ensures your pump operates effectively.
Rozwiązywanie problemów
- Zmniejszony przepływ wody: If you notice a decrease in water flow from your pump, the filter cartridge may be clogged. Remove and clean the cartridge. If flow does not improve, replace it with a new one.
- Mętna woda w basenie: Cloudy water often indicates inefficient filtration. Ensure the filter cartridge is clean and properly installed. If the problem persists after cleaning, replace the cartridge. Also, check your pool's chemical balance.
- Pompa nie działa: Verify the pump is plugged in and receiving power. Check for any blockages in the hoses or pump impeller. Ensure the filter cartridge is correctly seated and the housing is sealed.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Typ filtra | Typ H |
| Tworzywo | Dakron |
| Wymiary | 3.6 cali (średnica) x 4 cali (wysokość) |
| Zgodność | Intex Filter Pumps 28601 & 28602 (also known as C330, 601, 602/G) |
| Zalecana wymiana | Co 2 tygodnie |
| Numer modelu | 29007E |
Image: A graphic detailing the dimensions (4 in x 3.6 in) and compatibility with Intex 28601EG 330 GPH Cartridge Filter Pump, along with cleaning and maintenance recommendations.
Kontakt i wsparcie
For further assistance or inquiries regarding your Intex products, please visit the official Intex website or contact their customer support. Keep your product model number (29007E) handy when seeking support.
Official Intex Webstrona: www.intexcorp.com
