Sanus SA405-B1 Universal Soundbar Speaker Mount Instruction Manual

Produkt ponadview

The Sanus SA405-B1 Universal Soundbar Speaker Mount is designed to seamlessly integrate your soundbar with your television, providing a clean and stylish audio setup. This easy-to-assemble kit attaches directly to the bottom of most televisions, supporting soundbars weighing up to 15 lbs (6.8 kg).

Image: The Sanus SA405-B1 mount securely holding a soundbar beneath a television, creating a streamlined entertainment system.

Informacje dotyczące bezpieczeństwa

• Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer.
• Sprawdź, czy powierzchnia montażowa może bezpiecznie utrzymać łączną wagę sprzętu i całego przymocowanego sprzętu.
• Use only the hardware provided by the manufacturer. Using incompatible hardware may cause damage or injury.
• Do not exceed the maximum weight capacity of 15 lbs (6.8 kg) for the soundbar.
• Sprawdź, czy wszystkie śruby są mocno dokręcone, jednak nie dokręcaj ich zbyt mocno.
• Podczas instalacji należy trzymać dzieci i zwierzęta z daleka.

Co jest w pudełku

Your Sanus SA405-B1 Universal Soundbar Speaker Mount package includes the following components:

• Universal Soundbar Speaker Mount Brackets (main horizontal bar and vertical L-brackets)
• Assorted Screws (M4, M5, M6, M8 sizes for TV and soundbar attachment)
• Washers and Spacers (various sizes for compatibility with different TV and soundbar models)
• Hex Key (for assembly)
• Instrukcja obsługi

Note: Specific quantities and types of hardware may vary slightly based on packaging revisions. Refer to the included instruction manual for a precise list.

Konfiguracja i instalacja

Follow these steps to properly install your Sanus SA405-B1 Universal Soundbar Speaker Mount.

Step 1: Prepare Your Television

• If your TV is already mounted, carefully remove it from the wall mount and place it face down on a soft, stable surface to prevent damage.
• Remove any existing mount brackets from the back of your TV.

Step 2: Assemble the Mount Brackets

• Identify the main horizontal bar and the two vertical L-brackets.
• Measure the width of the mounting holes on the back of your TV.
• Attach the vertical L-brackets to the main horizontal bar, aligning them with the measured width of your TV's lower VESA mounting holes. Secure them using the provided screws and hex key.

Step 3: Attach Mount to Television

• Align the assembled soundbar mount with the lower VESA mounting holes on the back of your TV.
• Use the appropriate screws and spacers (if necessary) to securely attach the soundbar mount to the TV. Ensure it is firmly fastened.

Step 4: Mount Soundbar

• Place your soundbar onto the L-shaped arms of the soundbar mount.
• Adjust the depth of the L-brackets to ensure the soundbar sits flush with the TV or at your desired position, avoiding obstruction of any up-firing speakers.
• Secure the soundbar to the L-brackets using the provided screws, if your soundbar has mounting points. If not, ensure it rests securely on the padded arms.

Step 5: Re-mount Television

• Carefully lift the TV (with the soundbar mount attached) and re-mount it onto your wall bracket.
• Double-check all connections and ensure the TV and soundbar are stable and secure.

Instrukcja wideo instalacji

Instrukcja obsługi

Once installed, the Sanus SA405-B1 mount requires no specific operation. Ensure your soundbar is powered on and connected to your television according to its own manufacturer's instructions. The mount provides a stable platform for your soundbar, enhancing your audio experience.

Konserwacja

• Okresowo sprawdzaj wszystkie śruby i połączenia, aby mieć pewność, że są dobrze dokręcone i bezpieczne.
• Czyść uchwyt miękką, suchą ściereczką. Unikaj środków czyszczących o właściwościach ściernych i rozpuszczalników.
• Do not hang additional items from the soundbar mount.

Rozwiązywanie problemów

Soundbar is not level:

• Ensure the TV itself is level.
• Verify that the L-brackets are evenly adjusted and securely tightened.

Soundbar feels loose:

• Check all screws connecting the mount to the TV and the soundbar to the mount. Tighten any loose connections.
• Ensure the soundbar's weight does not exceed 15 lbs (6.8 kg).

Specyfikacje

Gwarancja i wsparcie

For warranty information or technical support, please refer to the official Sanus webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon zakupu na wypadek ewentualnych roszczeń gwarancyjnych.