PAC LCGM29

Instrukcja obsługi interfejsu wymiany radia PAC LCGM29

Model: LCGM29

Wstęp

This manual provides instructions for the installation and operation of the PAC LCGM29 Radio Replacement Interface. This interface is designed to retain essential vehicle features when replacing the factory radio in select non-amplified 29-Bit LAN GM vehicles without Bose or OnStar systems.

PAC LCGM29 Radio Replacement Interface module and wiring harness
This image displays the PAC LCGM29 interface module alongside its multi-colored wiring harness, ready for connection to a vehicle's electrical system and an aftermarket radio.

Główne cechy

  • Retains all safety warning chimes when the factory radio is replaced.
  • Provides 10-minute Retained Accessory Power (RAP) output.
  • In-package updatable using the PAC-UP.
  • Includes 14-Pin & 16-pin connectors.

Zgodność pojazdu

The LCGM29 interface is compatible with select General Motors (GM) vehicles equipped with a 29-Bit LAN system and without factory Bose or OnStar audio systems. It is designed for non-amplified vehicle sound systems.

Zawartość opakowania

  • Radio Replacement Interface (LCGM29 module and wiring harness)
Close-up of PAC LCGM29 module label
Zbliżenie view of the PAC LCGM29 module, clearly showing the 'LCGM29' model designation printed on its label.

Instrukcje instalacji

Ważny: Professional installation is recommended. Disconnect the vehicle's negative battery terminal before beginning installation.

  1. Remove the factory radio from the vehicle dashboard.
  2. Connect the PAC LCGM29 wiring harness to the aftermarket radio's wiring harness according to the wiring diagram provided with your aftermarket radio and the LCGM29.
  3. Connect the vehicle-specific connector from the LCGM29 harness to the vehicle's factory radio harness.
  4. Connect the LCGM29 module to its corresponding connector on the harness.
  5. Secure the LCGM29 module and excess wiring in a safe location behind the dashboard, away from moving parts or heat sources.
  6. Reinstall the aftermarket radio into the dashboard.
  7. Podłącz ponownie ujemny zacisk akumulatora pojazdu.
  8. Test all functions of the aftermarket radio and vehicle chimes.

Instrukcja obsługi

The PAC LCGM29 operates automatically once installed. It ensures that safety warning chimes function correctly and provides retained accessory power (RAP) for a period after the ignition is turned off, mimicking the factory radio's behavior.

  • Zapasowe zasilanie akcesoriów (RAP): After turning off the ignition, the aftermarket radio will remain powered for approximately 10 minutes or until a vehicle door is opened, whichever occurs first.
  • Safety Chimes: All factory safety warning chimes (e.g., seatbelt, door ajar, low fuel) will be retained and function through the vehicle's audio system.

Konserwacja

The PAC LCGM29 interface is designed for maintenance-free operation. Ensure all connections are secure during installation. No user-serviceable parts are inside the module.

  • Keep the module free from moisture and extreme temperatures.
  • Nie należy podejmować prób otwierania lub modyfikowania modułu, gdyż spowoduje to utratę gwarancji.

Rozwiązywanie problemów

WydanieMożliwa przyczynaRozwiązanie
No audio from aftermarket radio.Nieprawidłowe połączenia okablowania.Verify all wiring connections between the LCGM29, aftermarket radio, and vehicle harness.
No safety chimes.LCGM29 module not powered or faulty.Check power connections to the LCGM29. Ensure the module is securely connected to its harness.
Retained Accessory Power (RAP) not functioning.Incorrect wiring or vehicle specific issue.Confirm the accessory wire from the LCGM29 is correctly connected to the aftermarket radio.
Vehicle battery drain.Incorrect wiring or module malfunction.Ensure all connections are correct and secure. If the issue persists, contact technical support.

For further assistance, refer to the PAC webodwiedź witrynę lub skontaktuj się z pomocą techniczną.

Specyfikacje

  • Marka: PAC
  • Model: LCGM29
  • Tworzywo: Copper (Core), Polyvinyl Chloride (PVC) (Jacket)
  • Wymiary przedmiotu (dł. x szer. x wys.): 12 x 1 x 5 cala
  • Waga przedmiotu: 3.2 uncji
  • Typ złącza: IDC, 3.5mm Jack or 3.5mm Mini-phone
  • Zgodność: Select Non-Amplified 29-Bit LAN GM Vehicles (without Bose or OnStar)

Zastrzeżenie prawne

Produkt ten zawiera substancje chemiczne, o których władze stanu Kalifornia wiedzą, że mogą powodować raka, wady wrodzone lub inne szkody reprodukcyjne.

Wsparcie i gwarancja

For technical support or warranty information, please visit the official PAC webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj paragon zakupu na wypadek reklamacji.

Powiązane dokumenty - LCGM29

Przedview BCI-GM31: Interfejs odblokowywania nawigacji i kamery cofania dla pojazdów GM
Instrukcja instalacji i obsługi PAC BCI-GM31, interfejsu GM LAN 29-bit umożliwiającego pasażerom odblokowanie nawigacji i korzystanie z kamery cofania.
Przedview Instrukcja instalacji interfejsu zamiennego radia GM PAC C2R-GM11b
Kompleksowy przewodnik instalacji PAC C2R-GM11b, interfejsu radia zamiennego do pojazdów GM GMLAN 11-bit bez OnStar. Interfejs ten zachowuje fabryczne sygnały ostrzegawcze, kierunkowskazy oraz funkcję zasilania akcesoriów (RAP), umożliwiając jednocześnie instalację radia samochodowego.
Przedview PAC GM6A-RST Radio Replacement Interface for GM Vehicles - Installation & Features
Detailed guide for the PAC GM6A-RST Radio Replacement Interface for General Motors vehicles (29-bit V2). Covers installation, wiring, SWC programming, VS41 camera integration, and RadioPRO PC App usage. Retains factory features like BOSE, OnStar, and steering wheel controls.
Przedview Interfejs wymiany radia PAC RP4.2-BM21 i sterowania z kierownicy do pojazdów BMW – instrukcja instalacji
Kompleksowy przewodnik instalacji interfejsu PAC RP4.2-BM21 do wymiany radia i sterowania z kierownicy w wybranych pojazdach BMW z magistralą CAN. Zachowaj fabryczne funkcje, zaprogramuj przyciski SWC i wykorzystaj wyjścia magistrali danych dzięki temu zaawansowanemu interfejsowi.
Przedview Zaawansowany AP4-FD32 AmpInterfejs lifier dla wybranych pojazdów Ford
Instrukcja obsługi i instrukcja instalacji dla AP4-FD32 Advanced AmpInterfejs lifier, zaprojektowany dla wybranych pojazdów Forda z systemami nagłośnienia premium A2B. Dowiedz się więcej o funkcjach, okablowaniu, konfiguracji i rozwiązywaniu problemów.
Przedview Instrukcja wymiany radia PAC CH1A-RSX i instalacji interfejsu sterowania z kierownicy
This guide provides installation instructions for the PAC CH1A-RSX interface, enabling radio replacement and steering wheel control retention in Chrysler, Dodge, and Jeep vehicles with specific databus radios. It covers wiring, programming, and feature verification.