CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

Wstęp

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Ważne informacje dotyczące bezpieczeństwa

Aby zmniejszyć ryzyko pożaru, porażenia prądem i obrażeń ciała, należy zawsze przestrzegać podstawowych zasad bezpieczeństwa podczas korzystania z urządzeń elektrycznych.

Zawartość opakowania

Your CLOVER D1-K water cooler package includes:

Specyfikacje

ModelD1-K
Typ produktuHot and Cold Countertop Bottleless Water Dispenser
Wymiary produktu10.7" szer. x 16.8" gł. x 17.2" wys.
Waga produktuNet: 26 lbs, Gross: 31 lbs
Kolor produktuCzarny i srebrny
ElektrycznyGniazdo 110V
Typ czynnika chłodniczegoR134a
Typ kompresoraLG
CertyfikatyUL
Temperatura wodyGorąco i zimno
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water ThermostatRegulowany w zakresie od 32°F do 50°F
Termostat do ciepłej wodyControlled to 185°F
Built-In Filtration SystemTak
Żywotność filtra750 galonów lub 12 miesiące
Ocenione jako Energy StarTak

Organizować coś

1. Umieszczenie

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. Podłączenie do wodociągu

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

Wewnętrzny view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

Instrukcja obsługi

1. Dozowanie wody

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

Przód view of the Clover D1-K water cooler with hot and cold water faucets
Rycina 3: Przód view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

Konserwacja

1. Czyszczenie

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp płótno.

2. Wymiana filtra

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

Rozwiązywanie problemów

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

Gwarancja

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 1 lata gwarancji na części i 3-letnia gwarancja na kompresor od daty zakupu. Prosimy zachować dowód zakupu na wypadek roszczeń gwarancyjnych. Niniejsza gwarancja obejmuje wady materiałowe i wykonawcze powstałe w wyniku normalnego użytkowania.

Wsparcie

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER webstrona.

Powiązane dokumenty - D1-K

Przedview Przewodnik po systemie Clover POS: plany oprogramowania, konfiguracja i rozwiązywanie problemów
Kompleksowy przewodnik po systemach Clover POS, obejmujący szczegóły planu oprogramowania, konfigurację urządzeń, integrację z aplikacjami innych firm, rozwiązywanie typowych problemów i zarządzanie operacjami biznesowymi.
Przedview Podręcznik implementacji Clover P2PE w wersji 5.0: Przewodnik po bezpiecznym przetwarzaniu płatności
W tym podręczniku znajdziesz szczegółowe instrukcje dotyczące wdrażania rozwiązania Clover do szyfrowania typu punkt-punkt (P2PE). Dowiedz się więcej o zatwierdzonych urządzeniach, instalacji, protokołach bezpieczeństwa i rozwiązywaniu problemów z terminalami płatniczymi Clover.
Przedview Podręcznik implementacji Clover P2PE: Konfiguracja i bezpieczeństwo bezpiecznego urządzenia płatniczego
W niniejszym podręczniku znajdują się szczegółowe instrukcje dotyczące wdrażania rozwiązania szyfrowania typu Point-to-Point (P2PE) firmy Clover, obejmujące konfigurację urządzenia, protokoły bezpieczeństwa i rozwiązywanie problemów z terminalami płatniczymi Clover.
Przedview Podręcznik implementacji Clover P2PE: Przewodnik po bezpiecznym przetwarzaniu płatności
W tym podręczniku szczegółowo opisano implementację szyfrowania typu punkt-punkt (P2PE) w urządzeniach Clover Mobile, Mini i Flex, obejmując konfigurację, bezpieczeństwo i zgodność ze standardem PCI w celu zapewnienia bezpiecznych transakcji płatniczych.
Przedview Instrukcja instalacji aplikacji Clover Mobile: konfiguracja, aktywacja i transakcje
Kompleksowy przewodnik dotyczący konfiguracji, aktywacji i użytkowania urządzenia Clover Mobile do przetwarzania płatności. Obejmuje konfigurację sprzętu, połączenie sieciowe, instalację aplikacji, zarządzanie kodem PIN, parowanie drukarek i obsługę transakcji.
Przedview Specyfikacje i funkcje systemu Clover Mini 3 POS
Szczegółowe specyfikacje i funkcje Clover Mini 3, kompaktowego, inteligentnego systemu POS do montażu na blacie. Zawiera porównanie z Clover Mini 2, opcje łączności, akcesoria i proces płatności.