YSI 251401Y

Instrukcja obsługi odczynnika proszkowego DPD wolnego chloru YSI 251401Y

For pHotoFlex and 900 Chlorine Colorimeter

1. Koniec produktuview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Informacje dotyczące bezpieczeństwa i postępowania

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. Konfiguracja i przygotowanie

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

3.1 Required Materials (Not Included)

3.2 Przygotowanie odczynnika

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sampTom.

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. Przygotuj SampKomórka: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sample do przetestowania.
  2. Wypełnij SampKomórka: Wypełnij sample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. Dodaj odczynnik: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sample w komórce.
  4. Mieszać: Czapka sample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. Czas reakcji: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. Mierzyć: Włóż przygotowany sample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. Rekordowe wyniki: Record the measurement results immediately.
  8. Posprzątać: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

Notatka: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. Konserwacja i przechowywanie

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6. Rozwiązywanie Problemów

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

ProblemMożliwa przyczynaRozwiązanie
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sample.
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • Sprawdź sample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
Inconsistent or erratic readings.
  • Niewłaściwe sampTom.
  • Zanieczyszczone sample komórki.
  • Pęcherzyki powietrza w sampkomórka.
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sampTom.
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7. Specyfikacje

8. Gwarancja i wsparcie

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

Powiązane dokumenty - 251401 lat

Przedview Instrukcja obsługi miernika przewodności YSI model 32
Instrukcja obsługi miernika przewodności YSI model 32 zawierająca szczegółowy opis ogólny, dane techniczne, procedury obsługi, konserwację i kalibrację.
Przedview Krótki przewodnik po YSI Pro20/Pro20i: Kalibracja i obsługa
Zwięzły przewodnik po kalibracji i obsłudze mierników tlenu rozpuszczonego YSI Pro20/Pro20i, obejmujący instalację membrany, konfigurację czujnika, kalibrację barometru i tlenu rozpuszczonego, kompensację zasolenia oraz wykonywanie pomiarów. Zawiera niezbędne kroki obsługi i dane kontaktowe.
Przedview Karta charakterystyki (SDS) roztworu buforowego YSI 3821 o pH 4.00
Pełna karta charakterystyki substancji niebezpiecznej (SDS) dla roztworu buforowego YSI 3821 o pH 4.00 zawierająca szczegółowe informacje na temat identyfikacji produktu, zagrożeń, składu, pierwszej pomocy, sposobu obchodzenia się z produktem, przechowywania oraz przepisów prawnych.
Przedview Instrukcja obsługi przyrządów do pomiaru tlenu rozpuszczonego i temperatury YSI EcoSense DO200A/DO200M
Niniejsza instrukcja obsługi zawiera szczegółowe instrukcje dotyczące obsługi, instalacji, konserwacji i rozwiązywania problemów z urządzeniami do pomiaru tlenu rozpuszczonego i temperatury YSI EcoSense DO200A i DO200M. Zawiera szczegółowe informacje na temat specyfikacji, akcesoriów i gwarancji.
Przedview Instrukcja obsługi i konserwacji nadajnika satelitarnego YSIT-1
Kompleksowa instrukcja obsługi nadajnika satelitarnego YSI model YSIT-1, obejmująca jego obsługę, konserwację, konfigurację sprzętu oraz informacje o poleceniach szeregowych. Szczegółowo opisano zarządzanie czasem, przechowywanie danych, formatowanie danych GOES, sterowanie nadajnikiem RF oraz synchronizację GPS.
Przedview Instrukcja obsługi YSI IQ Sensor Net MIQ/CHV PLUS
Niniejsza instrukcja obsługi zawiera szczegółowe wskazówki dotyczące modułu zaworów YSI IQ Sensor Net MIQ/CHV PLUS, obejmujące instalację, ustawienia, konserwację, a także wytyczne dotyczące bezpieczeństwa dotyczące głowic czyszczących czujniki za pomocą sprężonego powietrza.