Wstęp
The Dish Network 20.1 IR Remote Control is designed to operate your Dish Network receiver and a television. This remote functions in Infrared (IR) mode, requiring a direct line of sight between the remote and the device being controlled. It is an upgraded version of the 20.0 remote, featuring expanded codes for compatibility with a wider range of newer televisions.
Główne cechy
- Operates Dish Network receivers in IR mode.
- Compatible with various television models.
- Capable of learning codes from other IR remotes.
- Requires four AAA batteries for operation.
Organizować coś
1. Instalacja baterii
The Dish Network 20.1 remote control requires four (4) AAA batteries.
- Znajdź pokrywę komory baterii z tyłu pilota.
- Przesuń pokrywę w dół i podnieś ją.
- Insert four AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Załóż pokrywę komory baterii, wsuwając ją z powrotem na miejsce, aż do zatrzaśnięcia.
Obraz: Przód view of the Dish Network 20.1 IR Remote Control, showing button layout.
2. Pairing with Dish Network Receiver (IR Mode)
The 20.1 remote is designed to control Dish Network receivers in IR mode. For newer receivers like the Hopper and Joey, which may have originally shipped with a UHF remote, you might need to configure the receiver to accept IR commands. Consult your receiver's manual for specific instructions on enabling IR mode.
Typically, the remote will control the Dish receiver automatically once batteries are installed and the receiver is set to IR mode.
3. Programming for Television Control
To control your television's power, volume, and input functions, you will need to program the remote with your TV's code.
- Włącz telewizor.
- Naciśnij i przytrzymaj TV mode button on the remote until all four mode buttons (SAT, TV, DVD, AUX) illuminate.
- Uwolnij TV przycisk. TV button should remain lit.
- Enter the 3-digit TV code for your television brand. Refer to the code list provided with your remote or search online for "Dish Network 20.1 TV codes" for your specific TV brand.
- After entering the code, the TV button should flash three times and then turn off, indicating successful programming. If it does not flash, repeat the process.
- Przetestuj pilota naciskając MOC button to turn off your TV. If it works, the programming is complete. If not, try the next code for your TV brand.
Image: Dish Network 20.1 Remote Control shown alongside a sheet of programming codes and room labels.
Instrukcja obsługi
Podstawowe funkcje
- MOC: Naciśnij MOC button to turn your Dish receiver and programmed TV on or off.
- OBJĘTOŚĆ +/-: Adjusts the volume of your programmed television.
- KANAŁ +/-: Changes the channel on your Dish receiver.
- NIEMY: Mutes or unmutes the sound on your programmed television.
- WYBIERAĆ: Potwierdza wybory w menu.
- PRZEWODNIK: Wyświetla przewodnik po programach.
- MENU: Accesses the main menu of your Dish receiver.
Obraz: Zbliżenie view of the central buttons on the Dish Network 20.1 Remote Control, highlighting navigation and function keys.
Funkcje zaawansowane
- DVR: Accesses your Digital Video Recorder functions.
- PLAY/PAUSE, STOP, RECORD, FWD, BACK, SKIP BACK, SKIP FWD: Control playback of recorded content.
- INFORMACJE: Wyświetla informacje o programie.
- SZUKAJ: Initiates content search.
- VIEW TELEWIZJA NA ŻYWO: Returns to live television viewing.
- PIP (obraz w obrazie): Controls Picture-in-Picture functionality, if supported by your receiver/TV.
- ZAMIENIAĆ: Swaps between two active channels or PIP windows.
Konserwacja
Wymiana baterii
Replace batteries when the remote's response becomes sluggish or the indicator lights do not illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.
Czyszczenie
Aby wyczyścić pilota, delikatnie przetrzyj go miękką, suchą ściereczką. Unikaj stosowania płynnych środków czyszczących ani materiałów ściernych, ponieważ mogą one uszkodzić powierzchnię pilota lub jego elementy wewnętrzne.
Rozwiązywanie problemów
Pilot nie odpowiada
- Ensure there is a clear line of sight between the remote and the Dish receiver/TV. Obstructions can block the infrared signal.
- Sprawdź baterie. Wymień je, jeśli są stare lub rozładowane.
- Verify that the correct mode button (SAT for receiver, TV for television) is selected before pressing a command.
- If controlling a Dish receiver, ensure the receiver is configured for IR mode, especially if it originally came with a UHF remote.
TV Not Programming
- Double-check the TV code entered. Ensure it matches your television brand.
- Try all available codes for your TV brand from the provided list.
- Upewnij się, że trzymasz TV mode button long enough for all four mode buttons to light up before releasing.
- Jeśli TV button does not flash three times after entering the code, the code was not accepted. Repeat the programming steps carefully.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | 20.1 |
| Marka | Danie |
| Komunikacja | Podczerwieni (IR) |
| Źródło zasilania | 4 baterie AAA (wymagane) |
| Wymiary produktu | 10.2 x 1.1 x 2.5 cala |
| Waga przedmiotu | 4.5 uncji |
| Kompatybilne urządzenia | Dish Network Receivers, Televisions |
| Funkcja specjalna | Ergonomic design, Learning capability |
Gwarancja i wsparcie
For warranty information and technical support, please refer to the official Dish Network website or contact Dish Network customer service directly.
Zastrzeżenie prawne: This product is shipped to continental U.S. only.
