Instrukcja obsługi cyfrowego timera Intermatic DAT100

Wstęp

The Intermatic Digital Appliance Timer DAT100 provides precise control over your electrical appliances with up to 28 programmable on/off settings. This timer is designed for ease of use, featuring automatic adjustments for sunrise/sunset and Daylight Saving Time, a clear digital display, and a battery backup for power outages. It includes two grounded receptacles for connecting various devices.

Produkt ponadview

Rysunek 1: Przód view of the Intermatic Digital Appliance Timer DAT100. This image displays the timer's white casing, the large LCD screen showing time and day, and the control buttons (OK, MODE, PROG, ON/OFF) located below the screen. A central rotary dial is also visible. A standard three-prong plug extends from the left side of the unit.

Organizować coś

1. Rozpakowanie i wstępna inspekcja: Carefully remove the timer from its packaging. Inspect the unit for any signs of damage.
2. Battery Installation/Backup: The timer includes a battery backup system to retain settings during power outages. Ensure the battery is properly seated. If the display is blank or shows a low battery indicator, replace the battery as per the Maintenance section.
3. Ustawianie aktualnego czasu i dnia:
   • Naciśnij TRYB button until the time setting mode is active.
   • Use the rotary dial or appropriate buttons (refer to specific unit markings) to adjust the hour, minute, and day of the week.
   • Naciskać OK aby potwierdzić każde ustawienie.
4. Korekta czasu letniego (DST): The DAT100 features an automatic Daylight Saving Time option. Consult the timer's display or specific instructions for enabling or disabling this feature.
5. Mounting/Plugging In: Plug the timer directly into a standard grounded electrical outlet. Ensure it is securely seated.

Instrukcja obsługi

The DAT100 timer offers flexible programming for various applications.

1. Zrozumienie wyświetlacza: The large LCD screen shows the current time, day, and active program status. A low battery indicator may also appear here.
2. Programming On/Off Cycles (Up to 28 Settings):
   • Naciśnij ŻARCIE przycisk, aby wejść w tryb programowania.
   • The display will show "PROG 1 ON". Use the rotary dial or buttons to set the desired ON time for the first program.
   • Naciskać OK to confirm. Then set the days of the week for this program (e.g., Mon-Fri, daily, specific days).
   • Repeat for "PROG 1 OFF" time.
   • Continue this process for up to 28 distinct ON/OFF programs.
   • Naciskać TRYB aby wyjść z trybu programowania.
3. Funkcja od zmierzchu do świtu: This timer can automatically adjust its ON/OFF times based on local sunrise and sunset. Refer to the specific instructions for enabling and configuring this feature, which typically involves selecting a "Dusk-to-Dawn" or "Astronomical" mode.
4. Ręczne nadpisanie: Ten WŁ./WYŁ. button allows for manual control, overriding the current program. Pressing it will toggle the connected appliance between ON and OFF states. The timer will resume its programmed schedule at the next scheduled event.
5. Podłączanie urządzeń: Plug your appliance(s) into the two grounded receptacles on the timer. Ensure the total load does not exceed the timer's maximum rating (15A/1800W).

Konserwacja

• Wymiana baterii: If the low battery indicator appears on the display, replace the internal battery promptly to ensure program retention during power outages. Refer to the timer's casing for battery type and replacement instructions. Typically, this involves opening a small compartment and inserting a new battery of the specified type.
• Instrukcje czyszczenia: Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the unit.

Rozwiązywanie problemów

• Wyświetlacz jest pusty:
  • Upewnij się, że timer jest prawidłowo podłączony do gniazdka pod napięciem.
  • Check if the internal battery needs replacement.
• Programy nie są uruchomione:
  • Sprawdź czy aktualna godzina i data są ustawione prawidłowo.
  • Confirm that the programs are enabled and set for the correct days.
  • Check if the manual override is active.
• Urządzenie nie włącza się/wyłącza:
  • Ensure the appliance is properly plugged into the timer and is functional.
  • Check the timer's current status (ON/OFF) and programmed schedule.
• Resetowanie timera: If the timer behaves erratically, a full reset may be necessary. Locate the small reset button (often recessed) and press it with a pointed object (e.g., a paperclip). This will clear all settings, requiring you to reprogram the unit.

Specyfikacje

Gwarancja i wsparcie

For warranty information or technical assistance, please refer to the official Intermatic webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon jako dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.

For general inquiries or product questions, you may also contact your retailer or distributor.