Metro 99-3303

Instrukcja montażu radia samochodowego Metra 99-3303

Model: 99-3303

1. Wprowadzenie

This manual provides detailed instructions for the proper installation and maintenance of your Metra 99-3303 Vehicle Radio Mount. This product is designed to facilitate the installation of an aftermarket single DIN or double DIN car stereo into specific vehicles, providing a factory-like finish and secure mounting. Please read all instructions carefully before beginning the installation process.

2. Informacje dotyczące bezpieczeństwa

  • Always disconnect the vehicle's negative battery terminal before starting any electrical installation to prevent short circuits and damage.
  • Aby uniknąć zagrożeń elektrycznych, należy upewnić się, że wszystkie połączenia przewodów są solidne i właściwie zaizolowane.
  • Szczegółowe procedury demontażu i ponownego montażu deski rozdzielczej znajdziesz w instrukcji serwisowej pojazdu.
  • If you are unsure about any part of the installation, consult a qualified professional installer.
  • Podczas montażu należy nosić odpowiedni sprzęt ochronny, taki jak rękawice i okulary ochronne.

3. Zawartość opakowania

Verify that all components are present before beginning installation. The Metra 99-3303 kit typically includes:

  • Main Dash Bezel / Trim Panel
  • Radio Mounting Brackets (left and right)
  • Wiring Harness Adapter (vehicle-specific)
  • Antenna Adapter (if required for vehicle)
  • Hardware Pack (screws, clips, etc.)
Metra 99-3303 Vehicle Radio Mount Kit components

Rysunek 1: This image displays the various components typically included in the Metra 99-3303 vehicle radio mount kit. It shows the main dash bezel, side mounting brackets, and a wiring harness adapter, designed to integrate an aftermarket radio into a vehicle's dashboard.

4. Wymagane narzędzia

Do instalacji potrzebne są zazwyczaj następujące narzędzia:

  • Narzędzie do usuwania paneli
  • Śrubokręt krzyżakowy
  • Wkrętak płaski
  • Szczypce do zdejmowania izolacji/zaciskarki
  • Taśma elektryczna lub rurki termokurczliwe
  • Small Socket Set (optional, depending on vehicle)

5. Konfiguracja i instalacja

Follow these general steps for installing the Metra 99-3303 radio mount. Specific vehicle disassembly steps may vary.

  1. Przygotowanie pojazdu: Odłącz ujemny zacisk akumulatora pojazdu.
  2. Dashboard Disassembly: Carefully remove the factory dash trim panels and any necessary components to access the factory radio. Use a panel removal tool to avoid scratching surfaces.
  3. Factory Radio Removal: Unbolt and remove the factory radio from the dashboard. Disconnect all wiring harnesses and the antenna cable from the back of the radio.
  4. Mount Assembly (to Aftermarket Radio): Attach the Metra mounting brackets to your new aftermarket radio using the screws provided with the radio or the Metra kit. Ensure the radio is centered and flush with the front of the brackets.
  5. Połączenia elektryczne: Connect the Metra wiring harness adapter to your aftermarket radio's wiring harness. Match wire colors (e.g., yellow to yellow for constant power, red to red for accessory power, black to black for ground). Solder or crimp connections for reliability and insulate them properly. Connect the antenna adapter if needed.
  6. Install Radio and Mount: Slide the assembled aftermarket radio and Metra mount into the vehicle's dash opening. Secure the mount using the factory mounting points or hardware provided.
  7. Połączenia testowe: Before reassembling the dash, reconnect the vehicle's negative battery terminal. Turn on the vehicle and test the aftermarket radio's functionality (power, audio, balance, fader, radio reception, etc.).
  8. Dashboard Reassembly: Once all functions are verified, disconnect the battery again. Reinstall all removed dash panels and components in reverse order of removal. Reconnect the battery.

6. Obsługa

The Metra 99-3303 is a passive mounting solution. Its primary function is to securely house your aftermarket car stereo within the vehicle's dashboard, providing a stable and aesthetically integrated platform. Once installed, the operation of your car audio system will be governed by the features and controls of your aftermarket radio itself. The mount ensures that the radio is held firmly in place and that the dash retains a factory-like appearance.

7. Konserwacja

The Metra 99-3303 radio mount requires minimal maintenance:

  • Periodically inspect the mounting screws and connections to ensure they remain tight and secure.
  • Clean the visible surfaces of the dash kit with a soft, damp szmatką. Unikaj ostrych środków chemicznych, które mogłyby uszkodzić wykończenie.
  • If any part of the mount becomes loose or damaged, address it promptly to prevent rattling or potential damage to the radio.

8. Rozwiązywanie Problemów

Most issues related to an aftermarket radio installation are typically electrical or related to the radio unit itself. However, if you encounter problems that might be related to the mount:

  • Luźne dopasowanie/grzechotanie: Ensure all mounting screws are tightened. Verify that the radio is properly seated within the mounting brackets and that the dash bezel is securely clipped into place.
  • Gaps Around Radio: Double-check that the radio is pushed fully into the mount and that the dash bezel is correctly aligned and snapped into the dashboard.
  • Radio się nie włącza: While often a wiring issue, ensure the radio is fully seated and making proper contact with the wiring harness. Re-check all electrical connections.

For electrical or radio-specific issues, refer to your aftermarket radio's instruction manual or consult a professional.

9. Specyfikacje

  • Marka: Metra
  • Numer modelu: 99-3303
  • Numer części producenta: BTL5002-KV0586
  • Waga przedmiotu: 1.5 funta (w przybliżeniu)
  • Wymiary opakowania: 14.06 x 12.03 x 12.02 cale (w przybliżeniu)
  • ASIN: B007W7Z8II
  • Zgodność: Designed for specific vehicle applications (refer to product packaging or Metra website for exact vehicle fitment).

10. Gwarancja i wsparcie

Warranty information for Metra products is typically provided by the manufacturer and may vary. Please refer to the documentation included with your specific product or visit the official Metra website for the most current warranty details and support options. For technical assistance or inquiries regarding your Metra 99-3303 Vehicle Radio Mount, it is recommended to contact Metra customer support directly.

Elektronika Metra: www.metraonline.com

Powiązane dokumenty - 99-3303

Przedview Przewodnik po aplikacjach EZ Order firmy Metra
Kompleksowy przewodnik po aplikacjach Metra EZ Order, szczegółowo opisujący kompatybilność pojazdów i numery części produktów do instalacji car audio. Zawiera informacje o aplikacji Metra Fit Guide na iPhone'a i Androida.
Przedview Instrukcja instalacji Metra 99-8220 dla Toyoty Tundra i Sequoia (2007-2011)
Instrukcja krok po kroku montażu zestawu Metra 99-8220 do deski rozdzielczej, umożliwiająca montaż radia w samochodach Toyota Tundra z lat 2007-2011 i Toyota Sequoia z lat 2008-2011. Zawiera funkcje zestawu, komponenty i okablowanie.
Przedview Zestaw montażowy Metra 99-6519 do Dodge Charger/Magnum 2005-2007
Szczegółowa instrukcja montażu zestawu montażowego Metra 99-6519, umożliwiająca instalację radia w standardzie 1 DIN, ISO-DIN lub DDIN w pojazdach Dodge Charger i Magnum (2005-2007) bez fabrycznej nawigacji. Zawiera opis funkcji zestawu, podzespołów, wymaganych narzędzi oraz instrukcje montażu krok po kroku.
Przedview Instrukcja instalacji Metra 99-7804 dla Hondy Accord 2013-2017
Szczegółowa instrukcja montażu zestawu Metra 99-7804 do deski rozdzielczej, umożliwiająca montaż radia z rynku wtórnego w Hondzie Accord z lat 2013-2017. Zawiera opis zestawu, podzespołów, demontażu, przygotowania, montażu, okablowania oraz instrukcje dotyczące ekranu dotykowego.
Przedview Metra 99-8164 Instrukcja instalacji dla Lexusa RX300 (1999-2003)
Instrukcja instalacji Metra 99-8164 dla modelu Lexus RX300 z lat 1999–2003, szczegółowo opisująca proces instalacji samochodowych systemów audio z zachowaniem klimatyzacji oraz zawierająca informacje na temat okablowania.
Przedview Instrukcja montażu Metra 99-8271 dla Toyoty 4-Runner (od 2010 r.)
Kompleksowa instrukcja montażu zestawu montażowego Metra 99-8271, przeznaczonego do modeli Toyota 4-Runner od 2010 roku. Zawiera opis funkcji zestawu, podzespołów, demontażu, przygotowania i montażu radia 1- i 2-DIN.