Wstęp
The 3M Hand Applicator Squeegee PA1-G Gold is a versatile and durable tool designed for various application tasks, particularly for film and premasking. Its design offers flexibility and durability, making it an effective solution for achieving smooth applications on different surfaces.
Główne cechy obejmują:
- Durable hand applicator construction.
- Reusable squeegee-type design.
- Softer plastic edge to help conform graphic film over lightly textured substrates.
- Suitable for hand applying premasking tape.
- Gold color for easy identification.
Informacje dotyczące bezpieczeństwa
OSTRZEŻENIE:
Ten produkt może narazić Cię na działanie substancji chemicznych, o których stan Kalifornia wie, że powodują raka, wady wrodzone lub inne uszkodzenia układu rozrodczego. Aby uzyskać więcej informacji, odwiedź stronę www.P65Warnings.ca.gov.
Organizować coś
The 3M Hand Applicator Squeegee PA1-G Gold is ready for use directly out of its packaging. No assembly or special preparation is required. Ensure the squeegee edge is clean and free of debris before each use to prevent scratching or marring the application surface.

Figure 1: The 3M Hand Applicator Squeegee PA1-G Gold. This image shows the front view of the gold-colored plastic squeegee, highlighting its simple, ergonomic design with two parallel raised lines for improved grip during application.
Instrukcja obsługi
This squeegee is designed for hand application of various materials, including graphic films, vinyl wraps, and premasking tapes. Its flexibility and durability make it suitable for a range of surfaces.
Ogólne kroki aplikacji:
- Przygotuj powierzchnię: Ensure the application surface is clean, dry, and free of dust, grease, or other contaminants.
- Ułóż materiał: Carefully place the film or premask onto the desired area, ensuring proper alignment.
- Zastosuj nacisk: Hold the squeegee firmly and apply even, consistent pressure across the material, working from the center outwards or from one edge to the opposite. This helps to remove air bubbles and ensure proper adhesion.
- Conform to Contours: For lightly textured surfaces like FRP (Fiber Reinforced Plastic), the softer edge of the PA1-G Gold squeegee helps the graphic film conform smoothly. Apply gentle, controlled pressure to work the material into the texture.
- Overlap Strokes: Overlap each squeegee stroke slightly to ensure complete coverage and prevent missed areas.
- Sprawdzać: After application, inspect the surface for any remaining air bubbles or imperfections. Re-squeegee as needed.
For optimal results, use the squeegee with a 3M low friction sleeve SA-1 if additional glide or surface protection is required.
Konserwacja
To ensure the longevity and effectiveness of your 3M Hand Applicator Squeegee PA1-G Gold, follow these simple maintenance guidelines:
- Czyszczenie: After each use, wipe the squeegee clean with a soft, damp cloth to remove any adhesive residue, dust, or dirt. Avoid using harsh chemicals or abrasive cleaners, as these can damage the plastic.
- Składowanie: Store the squeegee in a clean, dry place away from direct sunlight and extreme temperatures. Protect the working edge from nicks or damage by storing it flat or in a protective sleeve if available.
- Kontrola: Periodically inspect the squeegee edge for any signs of wear, nicks, or deformities. A damaged edge can scratch or mar the material being applied. Replace the squeegee if the edge is compromised.
Rozwiązywanie problemów
While the 3M Hand Applicator Squeegee PA1-G Gold is a simple tool, some common issues can arise during application. Here are solutions to typical problems:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Material is scratching or marring. |
|
|
| Air bubbles or wrinkles remain. |
|
|
| Squeegee feels too stiff. |
|
|
Specyfikacje
| Atrybut | Szczegół |
|---|---|
| Producent | 3M |
| Numer części | PA-1 G Gold |
| Waga przedmiotu | 0.64 uncji |
| Wymiary produktu | 2.7 x 0.3 x 3.9 cala |
| Numer modelu przedmiotu | PA-1 G Gold |
| Rozmiar | 4" (Length) x 3" (Tall) |
| Kolor | Złoto |
| Tworzywo | Plastikowy |
| Ilość w opakowaniu przedmiotu | 1 |
| Materiał uchwytu | Plastikowy |
| ASIN | B00657WL3G |
| Data pierwszej dostępności | 9 listopada 2011 r. |
Gwarancja i wsparcie
3M products are manufactured to high standards. For specific warranty information or product support, please refer to the official 3M webOdwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta 3M. Zachowaj paragon jako dowód zakupu.
For further assistance, visit the official 3M Store online or contact their customer support channels.