1. Wprowadzenie
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your KLUDI BALANCE Electronic Basin-fitting Low Pressure Faucet, Model 5220205. Please read these instructions carefully before beginning installation or use to ensure proper function and to prevent damage.
The KLUDI BALANCE electronic basin-fitting is designed for low-pressure water systems and features a touchless operation with an integrated power supply, offering convenience and hygiene in your bathroom or kitchen.
2. Instrukcje bezpieczeństwa
- Bezpieczeństwo elektryczne: This product operates with an external power supply. Ensure the power supply is installed by a qualified electrician in accordance with local electrical codes. Do not expose the power supply or electrical connections to water. Disconnect power before any maintenance or installation work.
- Ciśnienie wody: This faucet is specifically designed for low-pressure systems. Do not connect to high-pressure water supplies as this may cause damage to the faucet and plumbing.
- Temperatura wody: Ensure the water heater settings are appropriate to prevent scalding. The faucet may include a temperature mixing handle; adjust carefully.
- Instalacja: Installation should be performed by a qualified professional to ensure correct plumbing and electrical connections.
- Czyszczenie: Use only mild cleaning agents. Abrasive cleaners or solvents can damage the polished chrome finish and internal components.
3. Koniec produktuview
The KLUDI BALANCE electronic basin-fitting combines modern design with touchless functionality. It features a polished chrome finish and is equipped with a sensor for automatic water flow activation.
Rysunek 3.1: Przód view of the KLUDI BALANCE Electronic Basin-fitting. This image displays the sleek, polished chrome finish of the faucet, highlighting the integrated sensor for touchless operation and the side-mounted lever for temperature adjustment.
Rysunek 3.2: Line drawing illustrating the general form and key features of the KLUDI BALANCE Faucet. This diagram provides a simplified view, emphasizing the sensor location and the overall profile jednostki.
4. Konfiguracja i instalacja
Before installation, ensure you have all necessary tools and that the water supply and electrical connections are prepared according to local regulations.
4.1 Lista kontrolna przed instalacją
- Verify that the water supply is low pressure.
- Ensure a suitable power outlet or connection point is available for the power supply unit.
- Confirm the basin has a single hole for deck mounting.
- Gather necessary tools: adjustable wrench, screwdriver, sealant tape, measuring tape.
4.2 Kroki instalacji
- Przygotuj powierzchnię montażową: Upewnij się, że basin surface is clean and dry around the faucet hole.
- Zamontuj kran: Insert the faucet body into the single hole on the basin. Secure it from underneath using the provided mounting hardware (washer and nut). Tighten firmly but do not overtighten.
- Podłącz przewody wodne: Connect the flexible supply hoses from the faucet to the hot and cold low-pressure water supply lines. Use sealant tape on threaded connections to prevent leaks. Ensure correct hot and cold connections if a temperature mixing function is present.
- Podłącz zasilanie: Connect the faucet's electrical cable to the provided power supply unit. Plug the power supply unit into a suitable electrical outlet or connect it to the electrical system as per local codes.
- Test szczelności i funkcjonalności: Slowly turn on the water supply and check all connections for leaks. Activate the faucet to ensure proper water flow and sensor operation.
Rysunek 4.1: Technical drawing of the KLUDI BALANCE Faucet, showing dimensions in millimeters and the G3/8 water connection. The diagram also illustrates the recommended maximum height for the power supply unit (max 700mm from the floor) and the 230V~ 50Hz electrical connection requirement.
5. Instrukcja obsługi
The KLUDI BALANCE electronic faucet is designed for intuitive, touchless operation.
5.1 Aktywacja przepływu wody
- Place your hands within the sensor's detection range (typically directly below the spout).
- Water will begin to flow automatically.
- Remove your hands from the sensor's range, and the water flow will stop automatically after a short delay.
5.2 Regulacja temperatury wody
The faucet features a single lever on the side for manual temperature adjustment.
- Move the lever to the left for hotter water.
- Move the lever to the right for colder water.
- Adjust the lever to achieve your desired water temperature.
6. Konserwacja
Regularna konserwacja zapewnia długowieczność i optymalną wydajność Twojej armatury.
6.1 Czyszczenie kranu
- Clean the polished chrome surface regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
- Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, or phosphoric acid, as these can damage the finish.
- Wipe the sensor area gently with a soft, damp cloth to ensure it remains free of obstructions.
6.2 Pielęgnacja czujnika
Keep the sensor lens clean and free from soap residue, dirt, or water spots to ensure reliable operation.
6.3 Power Supply Check
Periodically check the power supply unit and its connections for any signs of damage or loose wiring. Ensure it is securely plugged in and not exposed to moisture.
7. Rozwiązywanie Problemów
Jeśli masz problemy z kranem, zapoznaj się z poniższymi, często spotykanymi problemami i ich rozwiązaniami.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak przepływu wody po aktywacji czujnika. |
|
|
| Woda płynie nieprzerwanie. |
|
|
| Słaby przepływ wody. |
|
|
| Temperatura nie jest regulowana. |
|
|
If these troubleshooting steps do not resolve the issue, please contact a qualified plumber or the manufacturer's customer support.
8. Specyfikacje
Detailed technical specifications for the KLUDI BALANCE Electronic Basin-fitting Low Pressure Faucet.
- Marka: Kludi
- Numer modelu: 5220205
- Typ montażu: Montaż na pokładzie
- Typ instalacji: Pojedynczy otwór
- Rodzaj wykończenia: Polerowany chrom
- Liczba uchwytów: 1 (for temperature adjustment)
- Zasilanie: External power supply unit (230V~ 50Hz recommended)
- Ciśnienie wody: Układ niskiego ciśnienia
- Waga przedmiotu: 5.51 funta (ok. 2.5 kg)
- Wymiary opakowania: 12.2 x 8.98 x 4.88 cala (ok. 31 x 22.8 x 12.4 cm)
- Wymagane baterie: NIE
- Globalny Numer Identyfikacji Handlowej (GTIN): 04021344065995
9. Gwarancja i wsparcie
For warranty information, please refer to the documentation provided with your purchase or visit the official Kludi webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.
For technical support or service inquiries, please contact Kludi customer service or your authorized dealer.
Producent: Kludi
