Moen TR1000BN

Moen TR1000BN Prosty, regulowany drążek na zasłonę prysznicową Instrukcja obsługi

Model: TR1000BN | Finish: Brushed Nickel

Wstęp

This manual provides instructions for the installation, operation, and maintenance of your Moen TR1000BN Straight Adjustable Tension Shower Curtain Rod. Designed for durability and ease of use, this rod features a brushed nickel finish and a tension-mount system that requires no drilling for installation.

Cechy produktu

Konfiguracja i instalacja

The Moen TR1000BN shower curtain rod utilizes a tension-mount system for secure installation without the need for drilling or permanent wall modifications. Follow these steps for proper setup:

  1. Rozpakuj komponenty: Carefully remove all parts from the packaging. Ensure all components are present and undamaged.
  2. Zmierz otwór: Determine the width of your shower or bathtub opening where the rod will be installed.
  3. Adjust Rod Length: Hold the rod with both hands. Twist the rod to extend it slightly beyond the measured opening width. The rod consists of two telescoping sections.
  4. Pozycja i bezpieczeństwo: Place one end of the rod against the wall at the desired height. Compress the rod slightly to fit it between the two walls. Release the tension, allowing the rod to expand and firmly press against both surfaces.
  5. Final Tightening (FastLock Technology): For enhanced stability, twist the rod further (typically 3 full turns as indicated by FastLock technology labels) until it is securely locked in place and does not slip. The decorative end covers should be flush against the wall.
  6. Stabilność testu: Gently tug on the rod to ensure it is firmly installed and can support the weight of your shower curtain and liner.
Moen TR1000BN Straight Adjustable Tension Shower Curtain Rod in Brushed Nickel

Figure 1: The Moen TR1000BN Straight Adjustable Tension Shower Curtain Rod, showcasing its brushed nickel finish and adjustable design.

Hands adjusting the length of the Moen shower curtain rod

Figure 2: Illustrates the adjustment mechanism of the tension rod, where users can twist to extend or retract the rod to fit their shower space.

Close-up of the decorative end cap of the Moen shower curtain rod

Rysunek 3: Szczegółowy view of the decorative end cap, which conceals the tension mechanism and provides a finished look.

Instrukcja obsługi

Once installed, the shower curtain rod requires minimal operation. Simply hang your shower curtain and liner using appropriate hooks. To adjust the rod's position or remove it, twist the rod in the opposite direction to release the tension, then compress it to shorten its length.

Konserwacja

To maintain the appearance and functionality of your Moen shower curtain rod, clean it regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed nickel finish. Ensure the rod remains dry after cleaning to prevent water spots.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Rod slips or falls down.Insufficient tension.Remove the rod, re-extend it slightly more than the opening, and re-install, ensuring to twist for final tightening (FastLock technology).
Rod does not extend or retract smoothly.Accumulation of dirt or debris in the telescoping mechanism.Clean the rod thoroughly, especially the joints, and ensure it is dry before re-adjusting.

Specyfikacje

AtrybutSzczegół
MarkaMoen
Numer modeluTR1000BN
KolorNikiel szczotkowany
TworzywoStal stopowa
Typ montażuNapięcie
Regulowana długość44" to 72" (approximate, based on product description)
Waga przedmiotu3.03 uncji (86 grama)
UPC034584017710

Gwarancja i wsparcie

The Moen TR1000BN Shower Curtain Rod is backed by Moen's Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Moen webodwiedź stronę internetową Moen lub skontaktuj się bezpośrednio z obsługą klienta Moen.

For more information about Moen products and water solutions, please watch the official brand video below:

Official Moen Brand Video: Learn more about Moen's commitment to water solutions and product quality.

Powiązane dokumenty - TR1000BN

Przedview Pręt napinający dekoracyjny Moen TR1000: Specyfikacja techniczna i montaż
Szczegółowe dane techniczne, numery katalogowe, wymiary, materiały i instrukcje montażu dekoracyjnego pręta napinającego Moen TR1000. Dowiedz się więcej o wykończeniach takich jak chrom, szczotkowany nikiel, matowa czerń, brąz Old World i brąz złoty.
Przedview Instrukcja montażu drążka prysznicowego Moen o regulowanej długości i zakrzywionym kształcie
Kompleksowa instrukcja montażu wygiętego drążka prysznicowego Moen o regulowanej długości (model INS10680), obejmująca narzędzia, części, instrukcję montażu krok po kroku oraz informacje na temat gwarancji.
Przedview MOEN Engage Sześciofunkcyjny prysznic ręczny - lista ilustrowanych części
Znajdź ilustrowane informacje o częściach do rączki prysznicowej MOEN Engage Six Function. W tym dokumencie wymieniono numery modeli, typy i wykończenia, w tym numery części węża 59".
Przedview Ilustrowana lista części Moen IVER M-CORE serii 2
Ilustrowana lista części do jednouchwytowej armatury wannowo-prysznicowej Moen IVER M-CORE serii 2, obejmująca modele UT2571, UT2672EP i UT2683EP. Zawiera szczegółowe informacje o identyfikatorach części, numerach zestawów i opcjach wykończenia.
Przedview Lista ilustrowanych części zaworu wannowego/natryskowego MOEN Banbury z jednym uchwytem
Szczegółowa, ilustrowana lista części do zaworu wannowo-prysznicowego MOEN Banbury z jednym uchwytem, ​​zawierająca numery modeli, opisy i wykończenia głowic prysznicowych, zestawów wykończeniowych, wylewek i elementów wewnętrznych.
Przedview Moen Hamden 4" bateria umywalkowa ilustrowana częściami
Szczegółowa, ilustrowana lista części do 4-calowej baterii umywalkowej Moen Hamden (model 84300SRN) w kolorze niklu szczotkowanego, odpornego na plamy. Zawiera numery części, opisy, szczegóły montażu odpływu oraz kompatybilność z różnymi grubościami blatu.