Golden Age Project R1 Active MKIII Active Ribbon Microphone User Manual

1. Wprowadzenie

The Golden Age Project R1 Active MKIII is an active ribbon microphone designed to deliver the characteristic warmth and smooth sound of a classic ribbon microphone, enhanced with the stability and output level of active electronics. This microphone is suitable for a wide range of recording applications, including vocals, acoustic instruments, electric guitar, and drums, offering a natural and musical sound reproduction.

This manual provides essential information for the proper setup, operation, and maintenance of your R1 Active MKIII microphone to ensure optimal performance and longevity.

2. Główne cechy

• Active ribbon design combining classic ribbon sound with stable output.
• Smooth high-end and extended low-end frequency response.
• Bipolar/FET discrete low-noise amplifier with a low impedance transformer-less output stage.
• Requires standard 48V phantom power for operation.
• Integrated active electronics raise the signal level and isolate the ribbon element.
• Switchable -10dB pad for handling high sound pressure levels.
• Switchable 100Hz low-cut filter to reduce unwanted low-frequency rumble.
• Includes a removable microphone cable and padded case.

3. Konfiguracja

1. Rozpakowywanie: Carefully remove the R1 Active MKIII microphone from its padded case. Inspect for any visible damage.
2. Montowanie: Attach the microphone to a suitable microphone stand using the integrated stand adapter. Ensure it is securely fastened.
3. Połączenie: Connect the included microphone cable (XLR) to the microphone's output and to an XLR input on your audio interface, mixer, or preampliyfikator.
4. Moc fantomowa: The R1 Active MKIII requires 48V phantom power to operate. Activate the 48V phantom power on your audio interface, mixer, or preamplifier. Ensure phantom power is applied Po connecting the microphone and turned off zanim disconnecting to prevent potential damage or loud pops.
5. Pozycjonowanie: Position the microphone appropriately for your sound source. Ribbon microphones typically have a figure-8 polar pattern, meaning they pick up sound from the front and back equally, while rejecting sound from the sides.

4. Obsługa mikrofonu

4.1. Przełączniki

The R1 Active MKIII features two switches on its body:

• -10dB Pad: This switch attenuates the microphone's output by 10 decibels. Engage this pad when recording very loud sound sources (e.g., close-miked guitar cabinets, drums) to prevent overloading the microphone's internal electronics or your preampwejście lifiera.
• 100Hz Low-Cut Filter: This switch activates a high-pass filter that reduces frequencies below 100Hz. Use this to minimize unwanted low-frequency rumble, handling noise, or proximity effect when recording vocals or instruments where deep bass is not desired.

4.2. Umiejscowienie mikrofonu

Due to its figure-8 polar pattern, the R1 Active MKIII is sensitive to sound from both the front and rear. Consider the following:

• Efekt zbliżeniowy: Like most directional microphones, ribbon microphones exhibit proximity effect, which is an increase in bass response as the microphone is moved closer to the sound source. Use this to your advantage for added warmth on vocals or instruments, or use the low-cut filter to counteract excessive bass.
• Odrzucenie poza osią: The sides of the microphone (90 degrees from the front/back) offer maximum sound rejection. This can be useful for isolating a sound source in a live room or reducing bleed from other instruments.
• Stereo Techniques: Two R1 Active MKIII microphones can be used for various stereo recording techniques, such as Blumlein pair (two figure-8 microphones crossed at 90 degrees) for a wide, natural stereo image.

5. Konserwacja

• Składowanie: Always store the microphone in its padded case when not in use to protect it from dust, moisture, and physical damage.
• Czyszczenie: Do czyszczenia zewnętrznej części mikrofonu używaj miękkiej, suchej ściereczki. Nie używaj płynnych środków czyszczących ani rozpuszczalników, ponieważ mogą one uszkodzić wykończenie lub elementy wewnętrzne.
• Obsługiwanie: Ribbon elements are delicate. Avoid dropping the microphone or subjecting it to strong vibrations. Do not blow directly into the microphone, as strong air blasts can damage the ribbon.
• Moc fantomowa: While the R1 Active MKIII is designed for phantom power, always ensure it is applied and removed correctly (as described in the Setup section) to prevent sudden electrical surges.

6. Rozwiązywanie Problemów

7. Specyfikacje

8. Informacje o gwarancji

Golden Age Project products are typically covered by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Golden Age Project webSzczegółowe warunki gwarancji dla Twojego regionu i daty zakupu znajdziesz na stronie. Zachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

9. Wsparcie

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Golden Age Project customer support. You can typically find contact information, FAQs, and additional resources on the official Golden Age Project webstrona:

www.goldenageproject.com

When contacting support, please have your product model (R1 Active MKIII) and serial number ready.