Wstęp
This manual provides instructions for the proper use and installation of National Hardware N218990 Shelf Bracket Screws. These screws are designed for securely attaching 211 series shelf brackets to walls and shelves, ensuring a stable and reliable installation. Please read all instructions carefully before beginning installation.
Zawartość opakowania
- 12 x National Hardware N218990 White Bracket Screws
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | N218990 |
| UPC | 038613218994 |
| Liczba jednostek | 12 śrub |
| Rozmiar śruby | #7 x 1-1/4" & 1/2" |
| Skończyć | Biały |
| Tworzywo | Stal stopowa, cynk |
| Typ montażu | Montaż ścienny |
| Producent | NATIONAL MFG CO |
Informacje dotyczące bezpieczeństwa
- Always wear appropriate personal protective equipment, such as safety glasses, when using tools for installation.
- Keep screws and small parts out of reach of children and pets to prevent choking hazards.
- Ensure the mounting surface is suitable and can support the intended load of the shelf and its contents.
- Use the correct size screwdriver or drill bit for pilot holes to prevent stripping the screw head or damaging the material.
Konfiguracja i instalacja
These screws are specifically designed for attaching National Hardware 211 series shelf brackets. Follow these steps for secure installation:
- Przygotuj powierzchnię: Identify the desired location for your shelf bracket. Ensure the wall or shelf material is solid and capable of holding weight. For drywall, locate wall studs for maximum support.
- Zaznacz otwory pilotażowe: Hold the shelf bracket in position and use a pencil to mark the locations for the screw holes.
- Wywierć otwory pilotażowe: For wood or drywall, drill small pilot holes at the marked locations. The pilot hole should be slightly smaller than the screw's diameter to allow the threads to grip firmly. For masonry or concrete, use an appropriate masonry drill bit and wall anchors (sold separately) if required.
- Zamocuj wspornik: Align the shelf bracket with the pilot holes. Insert the National Hardware N218990 screws through the bracket's holes and into the pilot holes.
- Dokręcić śruby: Using a Phillips head screwdriver or a drill with a Phillips bit, carefully tighten each screw until the bracket is firmly secured against the surface. Do not overtighten, as this can strip the screw head or damage the material.
This image displays two National Hardware N218990 shelf bracket screws. Both screws feature a white finish on their Phillips head and a threaded shaft designed for secure fastening. The longer screw is positioned diagonally in the foreground, with a slightly shorter screw visible behind it.
Konserwacja
Periodically check the tightness of the screws, especially if the shelf is subjected to heavy loads or frequent movement. Retighten any loose screws to maintain stability and safety. Clean the screw heads with a soft, dry cloth if necessary.
Rozwiązywanie problemów
- Screw not going in: Ensure the pilot hole is adequately sized. If the material is very hard, a slightly larger pilot hole may be needed, or consider using a different type of fastener for that material.
- Screw head stripping: This usually occurs from overtightening or using an incorrect screwdriver bit. Use the correct Phillips head bit and apply firm, even pressure while turning.
- Uchwyt wydaje się luźny: Verify that the screws are fully tightened and that the mounting surface is solid. If mounting to drywall without a stud, consider using appropriate wall anchors for increased stability.
Gwarancja i wsparcie
For information regarding warranty or product support, please contact National Hardware directly through their official website or customer service channels. Retain your purchase receipt for any warranty claims.
